Master's program

Filter
Conference contribution

Search results

  • 2008

    Single live-bacterial cell assay of promoter activity and regulation

    Teramoto, J., Hasegawa, A., Shohata, E., Kori, A., Magdy, E. S. H., Nakajima, M., Lin, Y. C., Yamanishi, Y., Magariyama, Y., Arai, F., Fukuda, T. & Ishihama, A., 2008 Dec 1, 2008 International Symposium on Micro-NanoMechatronics and Human Science, MHS 2008, with Symposium on "COE for Education and Research of Micro-Nano Mechatronics". p. 301-306 6 p. 4752467. (2008 International Symposium on Micro-NanoMechatronics and Human Science, MHS 2008).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    1 Citation (Scopus)

  • SOFC dynamics behaviour simulation model

    Fujita, G., Yokoyama, R., Koyanagi, K., Funabashi, T. & Nomura, M., 2008, ECOS 2008 - Proceedings of the 21st International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems. Silesian University of Technology, p. 1873-1879 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Studies to decrease cogging force and pulsating thrust in the prototype linear permanent magnet vernier motor

    Shimomura, S., Fujieda, M. & Hoshino, K., 2008 Dec 1, Proceedings of the 11th International Conference on Electrical Machines and Systems, ICEMS 2008. p. 3417-3422 6 p. 4771357. (Proceedings of the 11th International Conference on Electrical Machines and Systems, ICEMS 2008).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    16 Citations (Scopus)

  • Support system for pocket billiards

    Takahashi, M., Kasai, T. & Suzuki, Y., 2008 Dec 1, Proceedings of SICE Annual Conference 2008 - International Conference on Instrumentation, Control and Information Technology. p. 3233-3236 4 p. 4655222. (Proceedings of the SICE Annual Conference).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    3 Citations (Scopus)

  • The CALET space observatory for JEM-EF on the international space station

    Wefel, J. P., Torii, S., Shimizu, Y., Kasahara, K., Hasebe, N., Hareyama, M., Kodaira, S., Okudaira, O., Yamashita, N., Miyazima, M., Miyaji, T., Tkayanagi, M., Ueno, S., Tomida, H., Saito, Y., Fuke, H., Yamagami, T., Nishimura, J., Tamura, T., Tateyama, N., & 53 othersHibino, K., Okuno, S., Shiomi, A., Takita, M., Yuda, T., Kakimoto, F., Tsunesada, Y., Terasawa, T., Kobayashi, T., Yoshida, A., Yamaoka, K., Katayose, Y., Shibata, M., Ichimura, M., Kuramata, S., Uchihori, Y., Kitamura, A., Yoshida, K., Murakami, H., Komor, Y., MIZUTANl, K., Munakata, K., Streitmatter, R. E., Mitchell, J. W., BARBlER, L. M., MOlSEEV, A. A., Krizmanic, J. F., Ormes, J. F., Case, G., Cherry, M. L., Guzik, T. G., Isbert, J. B., Binns, W. R., Israel, M. H., Krawczynski, H. S., Marrocchesi, P. S., Bigongiari, G., Batkov, K., Kim, M. Y., Bagliesi, M. G., Masestro, P., Millucci, V., Zei, R., Adriani, O., Papini, P., Vannuccini, E., Bonechi, L., Chang, J., Yan, J., Gan, W., Chen, G., Ma, Y. & Wang, H., 2008, Astroparticle, Particle and Space Physics, Detectors and Medical Physics Applications - Proceedings of the 10th Conference. World Scientific Publishing Co. Pte Ltd, p. 911-915 5 p. (Astroparticle, Particle and Space Physics, Detectors and Medical Physics Applications - Proceedings of the 10th Conference).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • The development of endoscopic surgery for a training simulator

    Yoneyama, S., Koyama, H., Komeda, T. & Yamamoto, S., 2008 Dec 1, 4th European Conference of the International Federation for Medical and Biological Engineering - ECIFMBE 2008. p. 1691-1694 4 p. (IFMBE Proceedings; vol. 22).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    1 Citation (Scopus)

  • The effect of Cr2O3/ZnO on hydrogen desorption properties of MgH2

    Patah, A., Takasaki, A. & Szmyd, J. S., 2008 Dec 1, Solid-State Chemistry of Inorganic Materials VII. p. 190-195 6 p. (Materials Research Society Symposium Proceedings; vol. 1148).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    2 Citations (Scopus)

  • The quasi-one-way function and its applications to image watermarking

    Ohzeki, K. & Gi, E., 2008 Dec 1, Proceedings of the International Multiconference on Computer Science and Information Technology, IMCSIT 2008. p. 501-508 8 p. 4747290. (Proceedings of the International Multiconference on Computer Science and Information Technology, IMCSIT 2008; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    3 Citations (Scopus)

  • Time synchronized wireless sensor system for building vibration measurement

    Uchimura, Y., 2008 Oct 9, Proceedings of INSS 2008 - 5th International Conference on Networked Sensing Systems. p. 215-218 4 p. 4610889. (Proceedings of INSS 2008 - 5th International Conference on Networked Sensing Systems).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • User's intention understanding system design for RT service according situation-investigation on the construction of RT (robot technology) ontology-

    Ukai, K., Mizukawa, M. & Ando, Y., 2008 Dec 1, Proceedings of SICE Annual Conference 2008 - International Conference on Instrumentation, Control and Information Technology. p. 3518-3522 5 p. 4655273. (Proceedings of the SICE Annual Conference).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    2 Citations (Scopus)

  • Using GPS outdoor autonomous driving system for robot development (ICCAS2008)

    Erikawa, Y., Ando, Y. & Mizukawa, M., 2008 Dec 1, 2008 International Conference on Control, Automation and Systems, ICCAS 2008. p. 2400-2403 4 p. 4694208. (2008 International Conference on Control, Automation and Systems, ICCAS 2008).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    2 Citations (Scopus)

  • Wireless network based control with time varying delay

    Uchimura, Y., 2008 Jan 1, Proceedings - 34th Annual Conference of the IEEE Industrial Electronics Society, IECON 2008. IEEE Computer Society, p. 2962-2967 6 p. 4758431. (IECON Proceedings (Industrial Electronics Conference)).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    6 Citations (Scopus)

  • Wireless network based identification and control with variable time delay

    Uchimura, Y., 2008 Dec 1, AMC'08 - 10th International Workshop on Advanced Motion Control, Proceedings. p. 336-341 6 p. 4516089. (International Workshop on Advanced Motion Control, AMC; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    3 Citations (Scopus)
  • 2007

    Adaptive control for the systems with hysteresis and uncertainties

    Chen, X., 2007, 9th IFAC Workshop "Adaptation and Learning in Control and Signal Processing", ALCOSP'2007 - Final Program and Abstracts. PART 1 ed. IFAC Secretariat, p. 275-280 6 p. (IFAC Proceedings Volumes (IFAC-PapersOnline); vol. 9, no. PART 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Ad hoc routing protocol with flooding control using unidirectional links

    Terada, S., Miyoshi, T., Morino, H., Ogawa, M. & Sezaki, K., 2007, 18th Annual IEEE International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC'07. 4394291. (IEEE International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    7 Citations (Scopus)

  • A media handover system with an IrDA pointer

    Kamioka, E. & Yamada, S., 2007 Dec 1, Proceedings of the 11th IASTED International Conference on Internet and Multimedia Systems and Applications, IMSA 2007. p. 62-67 6 p. (Proceedings of the 11th IASTED International Conference on Internet and Multimedia Systems and Applications, IMSA 2007).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • A method for estimating 3-D nuclear parameters using an image taken from a hepatic histopathological section

    Takahashi, M., Yoshimi, T. & Nakano, M., 2007, 29th Annual International Conference of IEEE-EMBS, Engineering in Medicine and Biology Society, EMBC'07. p. 3761-3764 4 p. 4353150. (Annual International Conference of the IEEE Engineering in Medicine and Biology - Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    1 Citation (Scopus)

  • Analysis of drain lag and current slump in GaN-based HEMTs and MESFETs

    Nakajima, A., Takayanagi, H., Itagaki, K. & Horio, K., 2007 Dec 1, 2007 International Symposium on Signals, Systems, and Electronics, URSI ISSSE 2007. p. 193-196 4 p. 4294446. (Conference Proceedings of the International Symposium on Signals, Systems and Electronics).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    1 Citation (Scopus)

  • An RF-ID driven holonic control scheme for production control systems

    Kamioka, K., Kamioka, E. & Yamada, S., 2007 Dec 1, Proceedings The 2007 International Conference on Intelligent Pervasive Computing, IPC 2007. p. 509-514 6 p. 4438486. (Proceedings The 2007 International Conference on Intelligent Pervasive Computing, IPC 2007).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    4 Citations (Scopus)

  • A study on quenching characteristics of YBaCuO bulk superconductor with deposited Ag layer

    Fukuda, K., Fujita, H., Sawa, K., Tomita, M., Murakami, M., Sakai, N. & Hirabayashi, I., 2007 Dec 1, Electrical Contacts 2007: Proceedings of the 53rd IEEE Holm Conference on Electrical Contacts. p. 76-81 6 p. 4318198. (Electrical Contacts, Proceedings of the Annual Holm Conference on Electrical Contacts).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    1 Citation (Scopus)

  • Basic research on the upper limb patient simulator

    Fujisawa, T., Takagi, M., Takahashi, Y., Inoue, K., Terada, T., Kawakami, Y. & Komeda, T., 2007, 2007 IEEE 10th International Conference on Rehabilitation Robotics, ICORR'07. p. 48-51 4 p. 4428405. (2007 IEEE 10th International Conference on Rehabilitation Robotics, ICORR'07).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    26 Citations (Scopus)

  • Calcium phosphate precipitation by galvanic current between titanium and gold in pseudo-body fluid

    Kobayashi, E., Ogo, M., Doi, H., Yoneyama, T., Noda, K. & Hanawa, T., 2007 Dec 1, Supplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006. PART 1 ed. p. 653-656 4 p. (Materials Science Forum; vol. 539-543, no. PART 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Characterization of tobacco odor in smokeing environment

    Hasegawa, A., Fujii, T., Takeda, K., Nishimura, N., Ikeda, K., Kagi, N., Fujii, S., Myojo, T. & Takayanagi, T., 2007, IAQVEC 2007 Proceedings - 6th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings: Sustainable Built Environment. p. 387-392 6 p. (IAQVEC 2007 Proceedings - 6th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings: Sustainable Built Environment; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Common mode radiation of a printed circuit board with embedded decoupling capacitor excited by IC's shoot-through current

    Sudo, T., Ichijo, S., Andresakis, J. & Yamazaki, K., 2007 Dec 1, International Engineering Consortium - DesignCon 2007. p. 1704-1715 12 p. (International Engineering Consortium - DesignCon 2007; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Common mode radiation of a printed circuit board with embedded decoupling capacitor excited by IC's shoot-through current

    Sudo, T., Ichijo, S., Kushihira, T., Yamamoto, T. & Yamazaki, K., 2007, ESTC 2006 - 1st Electronics Systemintegration Technology Conference. Vol. 1. p. 67-72 6 p. 4060704

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Corrosion behavior of zirconium based alloys in simulated body fluids

    Tsutsumi, Y., Takano, Y., Doi, H., Noda, K. & Hanawa, T., 2007, Selected, peer reviewed papers from The Sixth Pacific Rim International Conference on Advanced Materials and Processing, PRICM 6. PART 2 ed. Trans Tech Publications Ltd, p. 1489-1492 4 p. (Materials Science Forum; vol. 561-565, no. PART 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    7 Citations (Scopus)

  • Design and fabrication of a shape memory alloy actuated exoskeletal microarm

    Arai, F., Azuma, D., Narumi, K., Yamanishi, Y. & Lin, Y. C., 2007 Dec 1, 2007 International Symposium on Micro-NanoMechatronics and Human Science, MHS. p. 339-343 5 p. 4420877. (2007 International Symposium on Micro-NanoMechatronics and Human Science, MHS).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    5 Citations (Scopus)

  • Development and properties of high strengthened carbon steels produced by repetitive side extrusion and heat treatment process

    Aoki, K. & Azushima, A., 2007, Supplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006. PART 3 ed. Trans Tech Publications Ltd, p. 2884-2891 8 p. (Materials Science Forum; vol. 539-543, no. PART 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    4 Citations (Scopus)

  • Development of management system in mechatronics education applying project management method

    Eguchi, Y., Ando, Y. & Mizukawa, M., 2007 Dec 1, SICE Annual Conference, SICE 2007. p. 552-557 6 p. 4421044. (Proceedings of the SICE Annual Conference).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    2 Citations (Scopus)

  • Development of pneumatic gait assist system

    Yamamoto, S., Miyoshi, T., Komeda, T., Hiramatsu, K., Nakazawa, K. & Akai, M., 2007 Dec 1, 2007 IEEE/ICME International Conference on Complex Medical Engineering, CME 2007. p. 1337-1340 4 p. 4381961. (2007 IEEE/ICME International Conference on Complex Medical Engineering, CME 2007).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    5 Citations (Scopus)

  • Effect of Ni addition on bending properties of Sn-Ag-Cu lead-free solder joints

    Kobayashi, T., Kariya, Y., Sasaki, T., Tanaka, M. & Tatsumi, K., 2007, Proceedings - 57th Electronic Components and Technology Conference 2007, ECTC '07. p. 684-688 5 p. 4249956. (Proceedings - Electronic Components and Technology Conference).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    8 Citations (Scopus)

  • Effects of cross-linkage and hydroxyl groups on bonding strength between titanium and segmented polyurethane through 3-(trimethoxysilyl) propyl methacrylate

    Sakamoto, H., Hirohashi, Y., Doi, H., Noda, K. & Hanawa, T., 2007 Dec 1, Selected, peer reviewed papers from The Sixth Pacific Rim International Conference on Advanced Materials and Processing, PRICM 6. PART 2 ed. p. 1477-1480 4 p. (Materials Science Forum; vol. 561-565, no. PART 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Effects of source access resistance on gate lag in AlGaN/GaN HEMTs and current slump behavior

    Horio, K., Nakajima, A. & Itagaki, K., 2007 Dec 1, 65th DRC Device Research Conference. p. 67-68 2 p. 4373653. (65th DRC Device Research Conference).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    1 Citation (Scopus)

  • Electroplating of metal micro-structure using a resist micro-machined by proton beam writing

    Uchiya, N., Furuta, Y., Nishikawa, H., Watanabe, T., Haga, J., Satoh, T., Oikawa, M., Ohkubo, T., Ishii, Y. & Kamiya, T., 2007, Digest of Papers - Microprocesses and Nanotechnology 2007; 20th International Microprocesses and Nanotechnology Conference, MNC. p. 288-289 2 p. 4456217. (Digest of Papers - Microprocesses and Nanotechnology 2007; 20th International Microprocesses and Nanotechnology Conference, MNC).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Evaluation of thermal comfort and energy consumption in a room with different heating systems

    Omori, T., Tanabe, S. I. & Akimoto, T., 2007 Dec 1, IAQVEC 2007 Proceedings - 6th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings: Sustainable Built Environment. p. 51-58 8 p. (IAQVEC 2007 Proceedings - 6th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings: Sustainable Built Environment; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    6 Citations (Scopus)

  • Fabrication of Bi4Ti3O12 thin films using alcohol related solutions by micro liquid delivery systems

    Yamaguchi, M., Yamamoto, A. & Masuda, Y., 2007, 2007 16th IEEE International Symposium on the Applications of Ferroelectrics, ISAF. p. 126-129 4 p. 4393190. (IEEE International Symposium on Applications of Ferroelectrics).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Fabrication of high-aspect-ratio pillars by proton beam writing and application to DEP-devices

    Furuta, Y., Uchiya, N., Nishikawa, H., Haga, J., Oikawa, M., Satoh, T., Ishii, Y., Kamiya, T., Nakao, R. & Uchida, S., 2007, Digest of Papers - Microprocesses and Nanotechnology 2007; 20th International Microprocesses and Nanotechnology Conference, MNC. p. 340-341 2 p. 4456243. (Digest of Papers - Microprocesses and Nanotechnology 2007; 20th International Microprocesses and Nanotechnology Conference, MNC).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    5 Citations (Scopus)

  • Flow structure and flame stability in an opposite flow micro can combustor with a baffle plate

    Yahagi, Y., Sekiguti, M. & Suzuki, K., 2007, 5th US Combustion Meeting 2007. Combustion Institute, p. 2296-2303 8 p. (5th US Combustion Meeting 2007; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Heating thermal comfort in highly air-tight and insulated house - Variation of peripheral skin temperature

    Akimoto, T., Emura, K., Tsuchikawa, T. & Saito, T., 2007, IAQVEC 2007 Proceedings - 6th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings: Sustainable Built Environment. p. 31-38 8 p. (IAQVEC 2007 Proceedings - 6th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings: Sustainable Built Environment; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Knowledge-based recurrent neural networks in reinforcement learning

    Le, T. D., Komeda, T. & Takagi, M., 2007, Proceedings of the 11th IASTED International Conference on Artificial Intelligence and Soft Computing, ASC 2007. p. 169-174 6 p. (Proceedings of the 11th IASTED International Conference on Artificial Intelligence and Soft Computing, ASC 2007).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    1 Citation (Scopus)

  • Laser-mode dynamics measurement and control of modelocked Er-fiber lasers

    Kobayashi, Y., Yoshitomi, D., Sakakibara, Y., Kataura, H., Takada, H., Kakehata, M., Torizuka, K., Onuma, T., Yokoi, H., Sekiguchi, T. & Nakamura, S., 2007 Dec 1, Conference on Lasers and Electro-Optics, 2007, CLEO 2007. 4452625. (Conference on Lasers and Electro-Optics, 2007, CLEO 2007).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Laser-mode dynamics measurement and control of mode-locked er-fiber lasers

    Kobayashi, Y., Yoshitomi, D., Sakakibara, Y., Kataura, H., Takada, H., Kakehata, M., Torizuka, K., Onuma, T., Yokoi, H., Sekiguchi, T. & Nakamura, S., 2007 Jan 1, Conference on Lasers and Electro-Optics, CLEO 2007. Optical Society of America, (Optics InfoBase Conference Papers).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Laser pointer as a mouse

    Wada, T., Takahashi, M., Kagawa, K. & Ohta, J., 2007, SICE Annual Conference, SICE 2007. p. 369-372 4 p. 4421010. (Proceedings of the SICE Annual Conference).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    10 Citations (Scopus)

  • Lithography using focused high-energy proton beam for fabrication of high-aspect-ratio microstructures

    Nishikawa, H., Furuta, Y., Uchiya, N., Haga, J., Oikawa, M., Satoh, T., Ishii, Y. & Kamiya, T., 2007 Dec 1, Digest of Papers - Microprocesses and Nanotechnology 2007; 20th International Microprocesses and Nanotechnology Conference, MNC. p. 66-67 2 p. 4456107. (Digest of Papers - Microprocesses and Nanotechnology 2007; 20th International Microprocesses and Nanotechnology Conference, MNC).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    1 Citation (Scopus)

  • Mass flow sensor using dual SAW device

    Nomura, T., Saitoh, A. & Koyama, K., 2007 Dec 1, 2007 IEEE International Frequency Control Symposium Joint with the 21st European Frequency and Time Forum, FCS. p. 25-30 6 p. 4319023. (Proceedings of the IEEE International Frequency Control Symposium and Exposition).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    2 Citations (Scopus)

  • Mixed reinforcement learning for partially observable Markov decision process

    Dung, L. T., Komeda, T. & Takagi, M., 2007, Proceedings of the 2007 IEEE International Symposium on Computational Intelligence in Robotics and Automation, CIRA 2007. p. 7-12 6 p. 4269910. (Proceedings of the 2007 IEEE International Symposium on Computational Intelligence in Robotics and Automation, CIRA 2007).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    5 Citations (Scopus)

  • Muscle movements depend on position of the center-of-mass relative to the ankle center of rotation in humans

    Miyoshi, T., Yamamoto, H., Yamamoto, S. I., Koyama, H. & Komeda, T., 2007, 2007 IEEE/ICME International Conference on Complex Medical Engineering, CME 2007. p. 1258-1262 5 p. 4381945. (2007 IEEE/ICME International Conference on Complex Medical Engineering, CME 2007).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Nano-graphitization in amorphous carbon films via electron beam irradiation and the iron implantation

    Iwamura, E. & Aizawa, T., 2007 Dec 1, Self Assembly of Nanostructures Aided by Ion- or Photon-Beam Irradiation: Fundamentals and Applications. p. 105-111 7 p. (Materials Research Society Symposium Proceedings; vol. 960).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    1 Citation (Scopus)

  • Navigation of the autonomous mobile robot using laser range finder based on the non quantity map

    Kubota, S., Ando, Y. & Mizukawa, M., 2007 Dec 1, ICCAS 2007 - International Conference on Control, Automation and Systems. p. 2329-2333 5 p. 4406749. (ICCAS 2007 - International Conference on Control, Automation and Systems).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    7 Citations (Scopus)

  • Overview on low power SoC design technology

    Usami, K., 2007 Dec 1, Proceedings of the ASP-DAC 2007 - Asia and South Pacific Design Automation Conference 2007. p. 634-636 3 p. 4196103. (Proceedings of the Asia and South Pacific Design Automation Conference, ASP-DAC).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    9 Citations (Scopus)