Find Research outputs

Search results

• Study on fading prediction for automated guided vehicle using probabilistic neural network

  Webber, J., Suga, N., Mehbodniya, A., Yano, K. & Kumagai, T., 2019 Jan 16, 2018 Asia-Pacific Microwave Conference, APMC 2018 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 887-889 3 p. 8617190. (Asia-Pacific Microwave Conference Proceedings, APMC; vol. 2018-November).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  6 Citations (Scopus)

• Study on filtered maximum entropy image restoration of limited angle diffraction tomography

  Hamamoto, K., Shiina, T. & Nishimura, T., 1995, In: Annual International Conference of the IEEE Engineering in Medicine and Biology - Proceedings. 17, 1, p. 573-574 2 p.

  Research output: Contribution to journal › Conference article › peer-review

• Study on fluid dynamic performance and stress analysis of the oscillating disk-type centrifugal pump

  Kabei, N., Iida, H., Kanno, R., Sakurai, Y. & Tsuchiya, K., 1992 Jan 1, In: Japanese Journal of Artificial Organs. 21, 2, p. 507-513 7 p.

  Research output: Contribution to journal › Article › peer-review

• Study on Fracture Criterion of a Crack in a Weld Line between Two Defferent Steels

  UTSUNOMIYA, T., OKU, H., ISHII, T. & WATANABE, K., 1999 Jun 5, In: Asian Pacific Conference for Fracture and Strength`99.

  Research output: Contribution to journal › Article › peer-review

• Study on grouser mechanism to directly detect sinkage of wheel during traversing loose soil for lunar exploration rovers

  Iizuka, K., Sasaki, T., Suzuki, S., Kawamura, T. & Kubota, T., 2014 Dec 1, In: ROBOMECH Journal. 1, 1, 15.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)

• Study on heat of hydration for cementations materials focus on ground granulated blast-furnace slag

  IYODA, T., ShinjiKANEYASU, SANEYASU. & DAN, Y., 2006 Aug 1, In: Default journal.

  Research output: Contribution to journal › Article › peer-review

• Study on heat of hydration for cementitious materials focus on ground granulated blast-Furnace slag

  Iyoda, T., Kaneyasu, S. & Dan, Y., 2006, Materials, Experimentation, Maintenance and Rehabilitation - Proceedings of the 10th East Asia-Pacific Conference on Structural Engineering and Construction, EASEC 2010. p. 725-730 6 p. (Materials, Experimentation, Maintenance and Rehabilitation - Proceedings of the 10th East Asia-Pacific Conference on Structural Engineering and Construction, EASEC 2010).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on heat transfer characteristics of loop heat pipe for solar collector

  Sato, S., Hirasawa, S., Kawanami, T. & Shirai, K., 2012 Dec 1, ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012. PARTS A, B, C, D ed. p. 1573-1581 9 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 7, no. PARTS A, B, C, D).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Study on high frequency inverter with 100kHz current feedback control by using FPGA

  Amano, S. & Akatsu, K., 2014 Jan 1, 2014 17th International Conference on Electrical Machines and Systems, ICEMS 2014. Institute of Electrical and Electronics Engineers Inc., p. 3392-3397 6 p. 7014078. (2014 17th International Conference on Electrical Machines and Systems, ICEMS 2014).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Study on highly efficient machining by small-diameter radius end mill (2nd report)-effect of pick feed on machining characteristic in the reciprocating cutting

  Nakai, H., Iida, Y., Sawa, T. & Anzai, M., 2020, In: Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 86, 1, p. 99-105 7 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Study on highly efficient machining by small-diameter radius end mill -cutting efficiency of face cutting and side cutting in high speed milling

  Nakai, H., Iida, Y., Sawa, T. & Anzai, M., 2019, In: Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 85, 4, p. 365-373 9 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  1 Citation (Scopus)

• Study on high speed milling of steam turbine blade materials - Difference in cutting characteristics by alloying elements of stainless steel

  Kimura, T., Sawa, T. & Kamijyo, T., 2016, Advances in Abrasive Technology XIX. Krajnik, P., Krajnik, P., Rashid, A., Aoyama, H., Xu, X. & Wang, J. (eds.). Trans Tech Publications Ltd, p. 439-444 6 p. (Materials Science Forum; vol. 874).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Study on high-speed milling of steam turbine blade materials - Differences in cutting characteristics of an unforged ingot and a forged part of stainless steel

  Kimura, T., Sawa, T. & Kamijyo, T., 2017, Recent Development in Machining, Materials and Mechanical Technologies II - IC3MT 2016. Fuh, Y. K. & Yamada, K. (eds.). Trans Tech Publications Ltd, p. 3-8 6 p. (Key Engineering Materials; vol. 749 KEM).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on high speed milling of steam turbine blade materials - Differences in cutting characteristics of titanium alloy and stainless steel

  Kimura, T., Kamijo, T. & Sawa, T., 2016 Jan 1, Advances in Abrasive Technology XIX. Krajnik, P., Krajnik, P., Rashid, A., Aoyama, H., Xu, X. & Wang, J. (eds.). Trans Tech Publications Ltd, p. 445-449 5 p. (Materials Science Forum; vol. 874).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Study on improvement of accuracy in end mill machining

  Iso, S., Toida, N., Ikeda, N., Kobayashi, Y., Shirai, K. & Tozawa, K., 2007 Dec 1, Proceedings of the 22nd Annual ASPE Meeting, ASPE 2007. (Proceedings of the 22nd Annual ASPE Meeting, ASPE 2007).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on input motion and dynamic response for undamaged RC school building during the 2004 Niigata-ken Chuetsu Earthquake

  Hijikata, K., Sugiyama, T., Tokumitsu, R., Yamazoe, M., Koyamada, K., Okano, H. & Miyamoto, Y., 2008 Sept, In: Journal of Structural and Construction Engineering. 73, 631, p. 1519-1527 9 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  3 Citations (Scopus)

• Study on Intraction between Surface end Subsurface Flows using Conjunctive Flow Model

  MORITA, M., MORI, M., A, A. & Yen, B. C., 2000 May 8, In: Groundwater Updates (Springer). p. 22-28

  Research output: Contribution to journal › Article › peer-review

• Study on investigate of environmental technology about housing in China: Take notice of solar heat utilization technology and insulation technology

  Zhao, Y., Kim, Y., Seike, T. & Akimoto, T., 2012, In: AIJ Journal of Technology and Design. 18, 39, p. 645-649 5 p.

  Research output: Contribution to journal › Review article › peer-review

• Study on Kawaii Colors of Virtual Objects in The Reign of Catz & Dogz 2009

  Ohkura, M., Goto, S., Murai, S. & Aoto, T., 2009 Apr 5, In: A one day workshop at ACM CHI, Boston.

  Research output: Contribution to journal › Article › peer-review

• Study on long-term occupancy records of public rental housing

  Minami, K., Ohi, K. & Takenoshita, Y., 2022 Apr, In: Japan Architectural Review. 5, 2, p. 179-191 13 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Study on low-cycle fatigue testing and therrmal fatigue life prediction of electroplated copper thin film for through hole via

  Watanabe, K., Yajima, N., Kariya, Y., Hiroshima, Y., Kikuchi, S., Matsui, A. & Shimizu, H., 2017 Jun 13, Proceedings of 2017 5th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2017. Institute of Electrical and Electronics Engineers Inc., p. 85 1 p. 7947481. (Proceedings of 2017 5th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2017).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on Magnetic Flux Dissipation and Field-Trapping Performance of HTS Bulk-Shaped Magnesium Diboride in Pulse-Field Magnetizing Processes

  Oka, T., Takeda, A., Oki, H., Ogawa, J., Fukui, S., Scheiter, J., Häßler, W., Yokoyama, K., Yamanaka, K., Dadiel, L., Miryala, M., Sakai, N., Murakami, M. & Noudem, J., 2019 Aug, In: IEEE Transactions on Applied Superconductivity. 29, 5, 8678817.

  Research output: Contribution to journal › Article › peer-review
  4 Citations (Scopus)

• Study on magnetic separation system using high Tc superconducting bulk magnets for water purification technique

  Oka, T., Kanayama, H., Tanaka, K., Fukui, S., Ogawa, J., Sato, T., Yamaguchi, M., Ooizumi, M., Yokoyama, K. & Noto, K., 2009, In: Journal of Physics: Conference Series. 156, 012031.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  8 Citations (Scopus)

• Study On Making City Model With Image And Laser Range Data

  NAKAGAWA, M., SHIBASAKI, R. & KAGAWA, Y., 2001 Nov 1, In: Default journal.

  Research output: Contribution to journal › Article › peer-review

• Study on making Klima-atlas with citizen participation: - Walking tour with citizens to experience and measure the urban thermal environment

  Masuda, Y., Okadome, S., Kagiya, K., Takaguchi, H., Takahashi, N. & Ojima, T., 2010 Feb, In: AIJ Journal of Technology and Design. 16, 32, p. 215-219 5 p.

  Research output: Contribution to journal › Article › peer-review

• Study on Mechanism of Pore Modification by Polymer Particles

  Yahiro, R., Kanda, T., Nishimura, K. & Iyoda, T., 2023, Proceedings of The 17th East Asian-Pacific Conference on Structural Engineering and Construction, 2022 - EASEC-17. Geng, G., Qian, X., Poh, L. H. & Pang, S. D. (eds.). Springer Science and Business Media Deutschland GmbH, p. 1358-1365 8 p. (Lecture Notes in Civil Engineering; vol. 302 LNCE).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on Metallic Particle Motion and Partial Discharge Characteristics in a GIS Tank Filled with CO₂ and SF₆

  Onomoto, M., Nishimura, T., Teshima, T., Ohtsuka, S., Matsumoto, S., Hikita, M., Tsuru, S. I. & Tanimura, A., 2005, In: The transactions of the Institute of Electrical Engineers of Japan.A. 125, 1, p. 71-76 6 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Study on Metallic Particle Motion and Particle Discharge Characteristics in a GIS Tank Filled with CO2 and SF6

  Onomoto, M., Nishimura, T., Teshima, T., Ohtsuka, S., Matsumoto, S., Tanimura, S. TA. & Hikita, M., 2005 Jan 1, In: IEEJ Trans. FM. 125-A, p. 71-76

  Research output: Contribution to journal › Article › peer-review

• Study on mobility enhancement in MOVPE-grown AlGaN/AlN/GaN HEMT structures using a thin AlN interfacial layer

  Miyoshi, M., Egawa, T. & Ishikawa, H., 2006 Sept, In: Solid-State Electronics. 50, 9-10, p. 1515-1521 7 p.

  Research output: Contribution to journal › Article › peer-review
  22 Citations (Scopus)

• Study on mobility mechanism using earth pressure to traverse loose soil with steep slope for Lunar exploration robot

  Iizuka, K., Oki, A., Suzuki, S. & Kawamura, T., 2014, MOVIC 2014 - 12th International Conference on Motion and Vibration Control. Japan Society of Mechanical Engineers

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on Modeling of Interaction between Surface and Subsurface Flows in Urban Watershed

  MORITA, M., 2004 Aug 1, In: Conference Proceedings UDM04. p. 551-559

  Research output: Contribution to journal › Article › peer-review

• Study on model predictive control to minimize temperature change at multi positions in vertical plate with varying heat generation

  Hirasawa, S., Kawanami, T. & Shirai, K., 2014.

  Research output: Contribution to conference › Paper › peer-review

• Study on molecular behavior in oxidation of insulating oil using terahertz spectroscopy

  Nishimura, N., Ogura, R., Matsumoto, S., Mizuno, M. & Fukunaga, K., 2011 Dec 5, In: IEEJ Transactions on Fundamentals and Materials. 131, 11, p. 943-948 6 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Study on multi-sensor unit for monitoring of living space environment and classification of daily activities

  Hirasawa, K. & Saitoh, A., 2009 Dec 1, 2009 IEEE/SICE International Symposium on System Integration: SI International 2008 - The 2nd Symposium on System Integration. p. 101-106 6 p. 5384549. (2009 IEEE/SICE International Symposium on System Integration: SI International 2008 - The 2nd Symposium on System Integration).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Study on optimal design of high temperature superconducting coil based on AC loss minimization

  Fukui, S., Ohsugi, K., Nishijyo, T., Ogawa, J., Oka, T., Yamaguchi, M., Sato, T., Furuse, M., Takao, T. & Tsukamoto, O., 2008 Jun, In: IEEE Transactions on Applied Superconductivity. 18, 2, p. 1366-1369 4 p., 4510854.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)

• Study on optimization design of superconducting magnet for magnetic force assisted drug delivery system

  Fukui, S., Abe, R., Ogawa, J., Oka, T., Yamaguchi, M., Sato, T. & Imaizumi, H., 2007 Oct 1, In: Physica C: Superconductivity and its applications. 463-465, SUPPL., p. 1315-1318 4 p.

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)

• Study on output characteristics of a scroll blood pump

  Kabei, N., Tashiro, R. & Tsuchiva, K., 1997 May 6, In: Japanese Journal of Artificial Organs. 26, 2, p. 315-320 6 p.

  Research output: Contribution to journal › Article › peer-review

• Study on performance improvements of a high-temperature superconducting coil with a lattice-shape cross section

  Ishiguri, S., Oka, T., Fukui, S., Ogawa, J. & Sato, T., 2008 Jul 15, In: Physica C: Superconductivity and its applications. 468, 14, p. 1028-1031 4 p.

  Research output: Contribution to journal › Article › peer-review

• Study on periodic thermal-switching behavior of flat heat pipe

  Hirasawa, S., Nakamu, T., Kawanami, T. & Shirai, K., 2015, Heat Transfer and Thermal Engineering. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 8B-2015).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Study on planetary rover using earth pressure to traverse loose soil with steep slope

  Iizuka, K., Oki, A., Suzuki, S. & Kawamura, T., 2014, 18th International Conference of the ISTVS. International Society for Terrain Vehicle Systems

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on possible double peaks in cutoff frequency characteristics of AlGaAs/GaAs HBTs by energy transport simulation

  Okada, T. & Horio, K., 1998, In: VLSI Design. 8, 1-4, p. 437-442 6 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Study on quality evaluation test for adhesion of adhesives used for post - Installed adhesive anchor

  Sato, K., Akiyama, T. & Hamasaki, H., 2019, In: Journal of Structural and Construction Engineering. 84, 759, p. 587-595 9 p.

  Research output: Contribution to journal › Article › peer-review

• Study on Radiation Transfer in Human Skin

  Yamada, J., Kawamura, A., Miura, Y., Takata, S. & Ogawa, K., 2004 Jul 1, In: Thermal Science and Engineering. 12, p. 125-126

  Research output: Contribution to journal › Article › peer-review

  3 Citations (Scopus)

• Study on radiation transfer in human skin for cosmetics

  Yamada, J., Kawamura, A., Miura, Y., Takata, S. & Ogawa, K., 2005 Jun 15, In: Journal of Quantitative Spectroscopy and Radiative Transfer. 93, 1-3 SPEC. ISS., p. 219-230 12 p.

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)

• Study on reduction in radiated emissions from PCB using test LSI

  Haga, S., Nakano, K., Sudo, T. & Hashimoto, O., 2003 Feb 20, In: Microwave and Optical Technology Letters. 36, 4, p. 238-242 5 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Study on refurbishment utilizing the subsidy system of existing building for energy conservation

  Aozasa, K., Akimoto, T., Seike, T., Washizaki, M. & Ohta, H., 2012, In: AIJ Journal of Technology and Design. 18, 39, p. 627-632 6 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Study on relationship between technostress and antisocial behavior on computers

  Kasuga, N., Itoh, K., Oishi, S. & Nagashima, T., 2004 Jun, In: IEICE Transactions on Information and Systems. E87-D, 6, p. 1461-1465 5 p.

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)

• Study on Relationship between Traveling State and Chassis Strain at Traveling Loose Soil for Rovers

  Inaba, K. & Iizuka, K., 2021, 2021 6th International Conference on Mechanical Engineering and Robotics Research, ICMERR 2021. Institute of Electrical and Electronics Engineers Inc., p. 136-141 6 p. (2021 6th International Conference on Mechanical Engineering and Robotics Research, ICMERR 2021).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on Rotational Barrier of N-C Axially Chiral Compounds: Remarkable Increase in the ROtational Barrier by Aromatization

  Suzumura, N., Kageyama, M., Dobashi, Y. & Kitagawa, O., 2012 May 17, In: Default journal.

  Research output: Contribution to journal › Article › peer-review

• Study on scenarios towards low carbon society in residential sector

  Iwata, T., Kuwasawa, Y., Murakami, S. & Ikaga, T., 2011 Sept, In: Journal of Environmental Engineering. 76, 667, p. 839-846 8 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)