Find Research outputs

Search results

• 2006

  Roof shape generation method for buildings using KANSEI evaluation rules

  Tsutsumi, K., Omori, Y. & Sasaki, K., 2006 Dec 1, Proceedings of the 2006 International Symposium on Evolving Fuzzy Systems, EFS'06. p. 306-311 6 p. 4016736. (Proceedings of the 2006 International Symposium on Evolving Fuzzy Systems, EFS'06).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 1998

  Specular and diffuse reflection measurement feasibility study of ISO9241 Part 7 method

  Umezu, N., Nakano, Y., Sakai, T., Yoshitake, R., Herlitschke, W. & Kubota, S., 1998, In: Displays. 19, 1, p. 17-25 9 p.

  Research output: Contribution to journal › Article › peer-review
• 1995

  Measurement of TFT/LCD flicker for ISO compliance

  Yoshitake, R. & Kataoka, R., 1995 Jan 1, In: Advances in Human Factors/Ergonomics. 20, B, p. 661-666 6 p.

  Research output: Contribution to journal › Article › peer-review
• 2011

  コンシューマーゲーム機の枠組み

  Furuya, S., 2011 Jun 25, In: Default journal. p. 20-21

  Research output: Contribution to journal › Article › peer-review
• 2012

  Development of electric rust preventive machining method - Correspond to difference of water in world: Use of adjusted synthesized water

  Nishikawa, N., Sato, Y., Kudo, K., Murase, T., Sawa, T., Kato, H., Yoshihara, N., Okawai, H., Karita, K., Iyama, T., Mizuno, M. & Tsukamoto, S., 2012, Ultra-Precision Machining Technologies. p. 373-381 9 p. (Advanced Materials Research; vol. 497).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  5 Citations (Scopus)
• 2013

  A scalable 3D heterogeneous multi-core processor with inductive-coupling thruchip interface

  Miura, N., Koizumi, Y., Sasaki, E., Take, Y., Matsutani, H., Kuroda, T., Amano, H., Sakamoto, R., Namiki, M., Usami, K., Kondo, M. & Nakamura, H., 2013 May 24, 2013 IEEE Hot Chips 25 Symposium, HCS 2013. Institute of Electrical and Electronics Engineers Inc., 7478328. (2013 IEEE Hot Chips 25 Symposium, HCS 2013).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2007

  A Connection Between Highlight And Contents On Sports

  YUMOTO, T., KUDO, Y. & FURUYA, S., 2007 Nov 1, In: 2nd International Design Congress-IASDR 2007.

  Research output: Contribution to journal › Article › peer-review
• 2012

  The effect of toe mechanism for simulation of small biped walkin robot by gait generation

  Nerakae, K. & Hasegawa, H., 2012, p. 80-85. 6 p.

  Research output: Contribution to conference › Paper › peer-review
• 2017

  Experimental study of the oscillation mode of the coupled oscillator ORIGAMI for TDC

  Kozuki, S., Retdian, N. & Shima, T., 2017 Aug 8, Proceedings of the 24th International Conference on Mixed Design of Integrated Circuits and Systems, MIXDES 2017. Napieralski, A. (ed.). Institute of Electrical and Electronics Engineers Inc., p. 90-94 5 p. 8005160. (Proceedings of the 24th International Conference on Mixed Design of Integrated Circuits and Systems, MIXDES 2017).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)
• 2001

  Active guard band circuit for substrate noise suppression

  Takagi, S., Agung, N. R., Wada, K. & Fujii, N., 2001 May, The 2001 IEEE International Symposium on Circuits and Systems. Institute of Electrical and Electronics Engineers Inc., Vol. 1. p. 548-551 4 p. 921914. (ISCAS 2001 - 2001 IEEE International Symposium on Circuits and Systems, Conference Proceedings; vol. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 1990

  An adaptive force control based on input classification

  Umahashi, Y., Uchimura, Y. & Ohnishi, K., 1990 Dec 1, p. 869-872. 4 p.

  Research output: Contribution to conference › Paper › peer-review
• 2007

  Applying Ontology and Probabilistic Model to Human Activity Recognition from Surrounding Things

  Yamada, N., Sakamoto, K., Isoda, Y., Yamazaki, K. & Tanaka, S., 2007 Aug 15, In: Journal of Information Processing. 48, p. 2823-2834

  Research output: Contribution to journal › Article › peer-review
• 2008

  A research on the evaluation of grindability of fine-ceramics by constant pressure grinding (1st report) -formulation of the removal rate in case of ductile mode and brittle mode grinding

  Sawa, T., Nagato, Y., Ikuse, Y. & Unno, K., 2008 Mar, In: Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 74, 3, p. 247-251 5 p.

  Research output: Contribution to journal › Article › peer-review
• 2020

  New weight filtering factor of nonlinear design for topology optimization under cyclic loading based on proportional technique

  Kongwat, S. & Hasegawa, H., 2020 Apr 1, In: Journal of Mechanical Science and Technology. 34, 4, p. 1635-1644 10 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)
• 1998

  Top-down low power design technique using clustered voltage scaling with variable supply-voltage scheme

  Hamada, M., Takahashi, M., Arakida, H., Chiba, A., Terazawa, T., Ishikawa, T., Kanazawa, M., Igarashi, M., Usami, K. & Kuroda, T., 1998 Jan 1, In: Proceedings of the Custom Integrated Circuits Conference. p. 495-498 4 p.

  Research output: Contribution to journal › Conference article › peer-review
  58 Citations (Scopus)
• 2003

  Design and Application of Hybrid Intelligent Systems

  Ishihara, S. & Igarashi, H., 2003 Dec 20, In: Default journal. p. 789-798

  Research output: Contribution to journal › Article › peer-review

• Tag Based Service Configuration in Ubiquitous Computing Environment

  Kunito, G., Sakamoto, K., Mizuki, A. & Yamazaki, K., 2003 Sept 24, In: Default journal. p. B-7-77

  Research output: Contribution to journal › Article › peer-review
• 2015

  Power gating for FDSOI using dynamically body-biased power switch

  Kumagai, Y., Kudo, M. & Usami, K., 2015 Mar 18, EUROSOI-ULIS 2015 - 2015 Joint International EUROSOI Workshop and International Conference on Ultimate Integration on Silicon. Institute of Electrical and Electronics Engineers Inc., p. 221-224 4 p. 7063813. (EUROSOI-ULIS 2015 - 2015 Joint International EUROSOI Workshop and International Conference on Ultimate Integration on Silicon).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2001

  Radon perfectness of conelike *-semigroups in Q^(∞)

  Furuta, K. & Sakakibara, N., 2001 Dec 1, In: Acta Mathematica Hungarica. 90, 1-2, p. 1-8 8 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• A study on the suitability of synthesized speech for the features of interface agents

  Takano, T., Yonemura, S. & Nishiyama, S., 2001 Feb 1, In: Default journal.

  Research output: Contribution to journal › Article › peer-review
• 2014

  Collision-free guidance control of multiple UAVs with restricted communication networks

  Aida, Y., Fujisawa, Y., Suzuki, S., Iizuka, K., Kawamura, T. & Ikeda, Y., 2014, MOVIC 2014 - 12th International Conference on Motion and Vibration Control. Japan Society of Mechanical Engineers

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)
• 2002

  Path factors in claw-free graphs

  Ando, K., Egawa, Y., Kaneko, A., Kawarabayashi, K. & Matsuda, H., 2002 Jan 1, In: Discrete Mathematics. 243, p. 195-200

  Research output: Contribution to journal › Article › peer-review

  24 Citations (Scopus)

• A neighborhood condition for graphs to have [a,b]-factors II

  Matsuda, H., 2002 Dec 1, In: Graphs and Combinatorics. 18, p. 763-768

  Research output: Contribution to journal › Article › peer-review

  2 Citations (Scopus)
• 2000

  A neighborhood condition for graphs to have [a,b]-factors

  Matsuda, H., 2000 Sept 1, In: Discrete Mathematics. 224, p. 289-292

  Research output: Contribution to journal › Article › peer-review

  21 Citations (Scopus)
• 2015

  A study on the curling robot will match with human result of one end game with one human

  Kawamura, T., Kamimura, R., Suzuki, S. & Iizuka, K., 2015 Nov 4, 2015 IEEE Conference on Computational Intelligence and Games, CIG 2015 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 489-495 7 p. 7317934

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  4 Citations (Scopus)
• 2003

  RIKEN Project Report: Everyday Language Computing

  Kobayashi, I., Takahashi, Y., Ito, N., Sugimoto, T., Iwashita, S., Iwazume, M. & Sugeno, M., 2003 Dec 8, In: 30th International Systemic Functional Linguistics Congress.

  Research output: Contribution to journal › Article › peer-review
• 2013

  Gray-world-assumption-based illuminant color estimation using color gamuts with high and low chroma

  Kawamura, H., Yonemura, S., Ohya, J. & Kojima, A., 2013 Apr 10, Proceedings of SPIE-IS and T Electronic Imaging - Color Imaging XVIII: Displaying, Processing, Hardcopy, and Applications. 86520C. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 8652).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)
• 2005

  A Fundamental Analysis of Topic Changes Prompted by the "○ "Communication System

  Jen, CHEN. L., Jun, OHYA., Yukio, TOKUNAGA., Tetsuya, KATO., Shunichi, YONEMURA. & Yonemura, S., 2005 Mar 1, In: 技術研究報告. 104, p. 47-51

  Research output: Contribution to journal › Article › peer-review
• 2012

  Development of a small, lightweight rover with elasticwheels for lunar exploration

  Iizuka, K., Sasaki, T., Hama, H., Nishitani, A., Kubota, T. & Nakatani, I., 2012 Dec, In: Journal of Robotics and Mechatronics. 24, 6, p. 1031-1039 9 p.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)
• 1999

  μ-synthesis Based Control for Compliant Maneuver

  UCHIMURA, Y. & KAZEROONI, H., 1999 Oct 14, In: IEEE System, Man and Cybernetics. 4, p. 1014-1019

  Research output: Contribution to journal › Article › peer-review

  3 Citations (Scopus)
• 2004

  An Implementation of Recursive Operations in Lambda-Evaluator YALE on Interaction Nets

  Sato, S. & Sugimoto, T., 2004 Jul 14, In: Proceedings of 4th International Workshop on Constructive Method for Parallel Programming. p. 1-14

  Research output: Contribution to journal › Article › peer-review
• 2007

  Comparative Study of Markerbased Detection and Tracking of PC in the Video Sequence Acquired by the Mobile Camera for Visual Call Center Applications

  Zhang, Q., Ohya, J. & Yonemura, S., 2007 Mar 1, In: 技術研究報告. 106, p. 77-82

  Research output: Contribution to journal › Article › peer-review
• 2021

  Study on Relationship between Traveling State and Chassis Strain at Traveling Loose Soil for Rovers

  Inaba, K. & Iizuka, K., 2021, 2021 6th International Conference on Mechanical Engineering and Robotics Research, ICMERR 2021. Institute of Electrical and Electronics Engineers Inc., p. 136-141 6 p. (2021 6th International Conference on Mechanical Engineering and Robotics Research, ICMERR 2021).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2014

  A thermal management system for building block computing systems

  Fujita, Y., Usami, K. & Amano, H., 2014 Nov 6, Proceedings - 2014 IEEE 8th International Symposium on Embedded Multicore/Manycore SoCs, MCSoC 2014. Institute of Electrical and Electronics Engineers Inc., p. 165-171 7 p. 6949468. (Proceedings - 2014 IEEE 8th International Symposium on Embedded Multicore/Manycore SoCs, MCSoC 2014).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)
• 2015

  On supplementary formulas for Sheffer sequences

  Ikeda, S., 2015 Aug 25, In: Aequationes Mathematicae. 89, 4, p. 1123-1131 9 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)
• 2003

  Examination of newly developed twin electrode electrolytic dressing method using DC power source - Possibility of application to bronze bond diamond wheel

  Translated title of the contribution: Examination of newly developed twin electrode electrolytic dressing method using DC power source - Possibility of application to bronze bond diamond wheelSawa, T., Ikuse, Y., Unno, K. & Yasui, H., 2003 Mar, In: Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 69, 3, p. 412-416 5 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
• 2019

  Second-Order N-path Notch Filter for Hum Noise Suppression

  Afifah, K., Arijal, M., Retdian, N. & Shima, T., 2019 Jan 7, ISESD 2018 - International Symposium on Electronics and Smart Devices: Smart Devices for Big Data Analytic and Machine Learning. Institute of Electrical and Electronics Engineers Inc., 8605468. (ISESD 2018 - International Symposium on Electronics and Smart Devices: Smart Devices for Big Data Analytic and Machine Learning).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2008

  Reduction of bootstrapped switch area consumption using pre-charge phase

  Nicodimus, R. A., Takagi, S. & Fujii, N., 2008, In: IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences. E91-A, 2, p. 476-482 7 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)
• 2016

  Design of programmable switched-capacitor DC-DC converters with arbitrary conversion ratio

  Nicodimus, R., Takeuchi, K. & Shima, T., 2016 Mar 11, 2015 International Symposium on Intelligent Signal Processing and Communication Systems, ISPACS 2015. Institute of Electrical and Electronics Engineers Inc., p. 285-288 4 p. 7432781

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)
• 2002

  Voltage controlled ring oscillator with wide tuning range and fast voltage swing

  Retdian, N., Takagi, S. & Fujii, N., 2002 Jan 1, 2002 IEEE Asia-Pacific Conference on ASIC, AP-ASIC 2002 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 201-204 4 p. 1031567. (2002 IEEE Asia-Pacific Conference on ASIC, AP-ASIC 2002 - Proceedings).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  44 Citations (Scopus)
• 2011

  Policy gradient reinforcement learning with environmental dynamics and action-values in policies

  Ishihara, S. & Igarashi, H., 2011, Knowledge-Based and Intelligent Information and Engineering Systems - 15th International Conference, KES 2011, Proceedings. PART 1 ed. p. 120-130 11 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 6881 LNAI, no. PART 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2009

  Basic study on the development of the general purpose vertical milling machine for educational skill training

  Sawa, T., Okabe, M., Siga, A., Mutoh, M., Kurihara, T. & Unno, K., 2009, Key Engineering Materials. Trans Tech Publications Ltd, p. 155-158 4 p. (Key Engineering Materials; vol. 407-408).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter
• 2010

  Analysis of channel use efficiency in Wireless mesh networks by adaptively controlling radio range and transmission rate

  Kawamura, H., Morino, H., Inoue, M. & Sanefuji, T., 2010 Feb 25, In: Proc . of the 4th Symposium of South East Asia Technical University Consortium(SEATUC). p. 257-260

  Research output: Contribution to journal › Article › peer-review
• 2006

  Delay modeling and static timing analysis for MTCMOS circuits

  Ohkubo, N. & Usami, K., 2006 Sept 19, Proceedings of the ASP-DAC 2006: Asia and South Pacific Design Automation Conference 2006. p. 570-575 6 p. 1594746. (Proceedings of the Asia and South Pacific Design Automation Conference, ASP-DAC; vol. 2006).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  6 Citations (Scopus)
• 1997

  Effective real-time video transmission system using fast bandwidth protocol over ATM networks

  Morino, H., Ban, Y., Aida, H. & Saito, T., 1997 Aug 1, In: IEEE Pacific Rim Conference on Communications, Computers and Signal Processing (PACRIM '97). p. 721-724

  Research output: Contribution to journal › Article › peer-review

  1 Citation (Scopus)
• 2017

  Basic study to reduce polishing process in mold manufacturing - Relationship between the surface pattern after machining and the polishing property -

  Sawa, T., 2017, p. 1205-1209. 5 p.

  Research output: Contribution to conference › Paper › peer-review
• 2002

  Quantitative evaluation of luminance non-uniformity in liquid crystal displays based on sensory analysis

  Mori, Y., Yoshitake, R., Tamura, T., Moriguchi, K., Tanahashi, K. & Tsuji, S., 2002 Dec 1, In: Proceedings of SPIE - The International Society for Optical Engineering. 4789, p. 283-290 8 p.

  Research output: Contribution to journal › Conference article › peer-review
  4 Citations (Scopus)
• 2010

  Call admission control for wireless access network exploiting adaptive multiple routing and load balancing

  Shih, H. Y. & Morino, H., 2010 Feb 25, In: Proc . of the 4th Symposium of South East Asia Technical University Consortium (SEATUC). p. 265-268

  Research output: Contribution to journal › Article › peer-review
• 2018

  Building block multi-chip systems using inductive coupling through chip interface

  Amano, H., Kuroda, T., Nakamura, H., Usami, K., Kondo, M., Matsutani, H. & Namiki, M., 2018 May 29, Proceedings - International SoC Design Conference 2017, ISOCC 2017. Institute of Electrical and Electronics Engineers Inc., p. 152-154 3 p. (Proceedings - International SoC Design Conference 2017, ISOCC 2017).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2010

  Model based mu-synthesis control for time-varying network based system

  Uchimura, Y. & Nagahara, M., 2010 Nov 10, In: Proceedings of the 36th Annual Conference of the IEEE Industrial Electronics Society. p. 1914-1919

  Research output: Contribution to journal › Article › peer-review