Find Research outputs

Search results

• Article

  1um Bubble lon-Implant Devices with Two Level lon-Implated Layers Between Propagation Trachs

  Shinohara, M., Hyuuga, F., Kouzen, A., Hirano, M. & Tsuzuki, N., 1985 Jan 1, In: IEEE Trans.on Magnetics. MAG-21

  Research output: Contribution to journal › Article › peer-review

• 2.5V CMOS Fully Differential Low Power High Linearity Analog Line-Driver

  Hadidi, K., Hadidi?, K. & Sasaki, M., 2003 Apr 1, In: Default journal. p. 67-72

  Research output: Contribution to journal › Article › peer-review

• "2000 Asilomar Conversation Community Conversation Team Progress Report: It's a Small World Idea Book Team: 2000Asilomar Summary."

  Brahms, S., Frantz, T. G., Dyer, G., Jenks, L. & Horiuchi, Y., 1800, In: Default journal. 13(2001), p. 51-54

  Research output: Contribution to journal › Article › peer-review

• 2004 JWES activities

  Hasegawa, H., 2005 Jul 1, In: Yosetsu Gakkai Shi/Journal of the Japan Welding Society. 74, 5, 1 p.

  Research output: Contribution to journal › Article › peer-review

• 2005 JWES Activities

  Hiroshi, H., 2006, In: Yosetsu Gakkai Shi/Journal of the Japan Welding Society. 75, 5, p. 321 1 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• 2006 Fuschl Design Conversation: Fuschl Extention Team Report: Igniting a New Form of Conversation

  Walton, D., Kordes, D. WU., Fuschs, C., Rivera, B., Rowl, G. & Horiuchi, Y., 1800, In: The Research Reports of Shibaura Institute of Technology Social Sciences and Humanities. 41, p. 67-77

  Research output: Contribution to journal › Article › peer-review

• 2006 JWES activities

  Hasegawa, H., 2007 Jul, In: Yosetsu Gakkai Shi/Journal of the Japan Welding Society. 76, 5, p. 47 1 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• 2007 JWES activities

  Hasegawa, H., 2008 Jul, In: Yosetsu Gakkai Shi/Journal of the Japan Welding Society. 77, 5, p. 50-51 2 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• 2008 JWES Activities

  Hiroshi, H., 2009, In: Yosetsu Gakkai Shi/Journal of the Japan Welding Society. 78, 5, p. 409 1 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• 2009 Advance Report of Ubiquitous Robot Technology System Research Center for Context Monitoring of Human Daily Activities

  Mizukawa, M., Ukai, K., Kato, T. & Mizuno, T., 2010 Feb 25, In: The 4th South East Asian Technical University Consortium (SEATUC) Symposium. The 4th South East A, p. 388-391

  Research output: Contribution to journal › Article › peer-review

• 2009 JWES activities

  Hasegawa, H., 2010 Jul, In: Yosetsu Gakkai Shi/Journal of the Japan Welding Society. 79, 5, p. 44 1 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• 2010 IFSR Conversation Report: Towards Integrative Systems Engineering for Movement of People, Goods and Information

  Horiuchi, Y., Dyer, G., Chroust, G., Ishida, S., Solomons, L. & Jones, J., 2010 Apr 15, In: Shibaura MOT Discussion Paper. 2011, p. 1-12

  Research output: Contribution to journal › Article › peer-review

• 2010 JWES Activities

  Hiroshi, H., 2011, In: Yosetsu Gakkai Shi/Journal of the Japan Welding Society. 80, 5, p. 417 1 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• 2011 JWES Activities

  Hiroshi, H., 2012, In: Yosetsu Gakkai Shi/Journal of the Japan Welding Society. 81, 5, p. 363 1 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• 2012 JWES Activities

  Hasegawa, H., 2013, In: Yosetsu Gakkai Shi/Journal of the Japan Welding Society. 82, 5, p. 365 1 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• 2-2 Ad hoc based emergency communications models for wide-scale disaster management

  Nguyen, H. N., Gyoda, K., Okada, K. & Takizawa, O., 2011 Mar, In: Journal of the National Institute of Information and Communications Technology. 58, 1-2, p. 95-105 11 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• 2-3 Performance evaluation of wireless ad hoc network for disaster communication

  Gyoda, K., Nguyen, H. N., Hada, Y., Okada, K. & Takizawa, O., 2011 Mar, In: Journal of the National Institute of Information and Communications Technology. 58, 1-2, p. 107-129 23 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• ²⁹Si MAS NMR of Na-Si-O-N oxynitride glasses

  Unuma, H., Maekawa, H., Kiyono, H., Kawamura, K., Maekawa, T. & Yokokawa, T., 1992, In: Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of the Ceramic Society of Japan. 100, 1167, p. 1292-1296 5 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  10 Citations (Scopus)

• 29Si MAS NMR of Na-Si-O-N Oxynitride Glasses

  Unuma, H., Maekawa, H., Kiyono, H., Kawamura, K., Maekawa, T. & Yokokawa, T., 1992 Jan 1, In: Journal of the Ceramic Society of Japan. 100, p. 1292-1296

  Research output: Contribution to journal › Article › peer-review

  10 Citations (Scopus)

• 2alpha -(3-Hydroxypropyl)- and 2 alpha-(3-Hydroxypropyl)-1alpha ,25-dihydroxyvitamin D3 accessible to Vitamin D Receptor Mutant Related to Hereditary Vitamin D-Resistant Rickets

  KITTAKA, KITTAKA., A., A., KURIHARA, KURIHARA., M., M., PLEG, PLEG., S., S., SUHARA, SUHARA., Y., Y., TAKAYAMA, TAKAYAMA. & H., H., 2003 Mar 1, In: Chemical & Pharmaceutical Bulletin. 51, p. 357-358

  Research output: Contribution to journal › Article › peer-review

  29 Citations (Scopus)

• 2- and 3-variations and finite type invariants of degree 2 and 3

  Sakurai, M., 2013 Jul 1, In: Journal of Knot Theory and its Ramifications. 22, 8, 1350042.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• 2CaO·SiO₂と鉄鉱石間の反応に及ぼす Al₂O₃ 添加の影響

  Translated title of the contribution: Effect of Al₂O₃ Addition on the Reaction between 2CaO·SiO₂ and Iron OreShimizu, C., Iwami, Y., Higuchi, T., Watanabe, T., Endo, R., Susa, M. & Hayashi, M., 2023, In: Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan. 109, 4, p. 245-256 12 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• 2D, 35/37Cl, 63/65Cu-NMR study on quantum spin system NH4CuCl3

  H.Inoue, H. I., S.Tani, S. T., H.Hosoya, H. H., T.Suzuki, T. S., T.Goto, T. G., H.Tanaka, H. T., T.Sasaki, T. S., N.Kobayashi, N. K. & Suzuki, T., 2006 Apr 1, In: AIP Conference Proceedings. 850, p. 1061-1062

  Research output: Contribution to journal › Article › peer-review

  1 Citation (Scopus)

• 2D designs to 3D computer data for re-edit design change

  Jamal, A. A. & Furuya, S., 2007 Aug 1, In: Default journal.

  Research output: Contribution to journal › Article › peer-review

• 2D design to 3D computer data for redesign change

  Jamal, A. A., Kudo, Y. & Furuya, S., 2007 Jun 23, In: Default journal. p. 292-293

  Research output: Contribution to journal › Article › peer-review

• 2-D numerical modeling of a bulk HTS magnetization based on H formulation coupled with electrical circuit

  Kapek, J., Berger, K., Koblischka, M. R., Trillaud, F. & Leveque, J., 2019 Aug, In: IEEE Transactions on Applied Superconductivity. 29, 5, 8633952.

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)

• 2-D Simulation of Kink-Related Sidegating Effcts in GaAs MESFETs

  K.Usami, K. U., K.Horio, K. H. & Horio, K., 1996 Dec 1, In: Solid-State Electron.. 39, p. 1737-1745

  Research output: Contribution to journal › Article › peer-review

• 2-D simulation of kink-related sidegating effects in GaAs MESFETs

  Usami, K. & Horio, K., 1996 Dec 1, In: Solid-State Electronics. 39, 12, p. 1737-1745 9 p.

  Research output: Contribution to journal › Article › peer-review

• 2-D simulations of trap-related drain-current transients in GaAs MESFETs and requirements for the substrate in MESFET-ICs

  K.Horio, K. H. & Horio, K., 1996 Mar 1, In: Report of Research Laboratory of Engineering. 10, p. 1-17

  Research output: Contribution to journal › Article › peer-review

• 2 Technologies for emergency communication networks: 2-1 for high availability of mobile phone-researches on network control technologies in disasters

  Okada, K., Nguyen, H. N. & Gyoda, K., 2011 Mar, In: Journal of the National Institute of Information and Communications Technology. 58, 1-2, p. 83-93 11 p.

  Research output: Contribution to journal › Article › peer-review

• 2 α-(3-hydroxypropyl)- and 2 α-(3-hydroxypropoxy)-1 α,25-dihydroxyvitamin D₃ accessible to vitamin D receptor mutant related to hereditary vitamin D-resistant rickets

  Kittaka, A., Kurihara, M., Peleg, S., Suhara, Y. & Takayama, H., 2003 Mar, In: Chemical and Pharmaceutical Bulletin. 51, 3, p. 357-358 2 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  17 Citations (Scopus)

• 3.5-Gb/s extended frequency range wave-pipeline PRBS Generator in 0.18-μm CMOS

  Sasaki, M., Ikeda, M. & Asada, K., 2007 Dec 1, In: Default journal. p. 526-529

  Research output: Contribution to journal › Article › peer-review

• 3-2 multimedia information processing

  Kasuga, M., Kamata, T., Yamanouchi, Y., Takeda, K., Mano, K. & Hasegawa, H. H., 2002 Sept, In: Kyokai Joho Imeji Zasshi/Journal of the Institute of Image Information and Television Engineers. 56, 9, 1 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  1 Citation (Scopus)

• 3-D CAD/CAM system Development of Ball End Mill Creation for High Speed Milling

  Lu, Y., Takeuchi, Y., Takahashi, I. & Anzai, M., 2004 Jun 1, In: Default journal. June 17-19, p. 51-57

  Research output: Contribution to journal › Article › peer-review

• 3D data acquisition and modelling of the world heritage - Case study of Tyre, Lebanon -

  Shibasaki, S., R., R., Nakagawa, N., M, M., Fujiwara, F., H, H., Takase, T., Y, Y., Yamada, Y. & O, O., 2003 Dec 1, In: Default journal.

  Research output: Contribution to journal › Article › peer-review

• 3D environment mapping and self-position estimation by a small flying robot mounted with a movable ultrasonic range sensor

  Premachandra, C., 2017 Mar, In: Journal of Electrical Systems and Information Technology. p. 1-10

  Research output: Contribution to journal › Article › peer-review

• 3D Face Reconstruction from a Single Image Using Machine Learning Methodology

  MORI, Y., UEHARA, K. & Yasumura, Y., 2009 Aug 21, In: Default journal. p. 29-32

  Research output: Contribution to journal › Article › peer-review

• 3-Dimensional elastic-plastic finite element analysis of stress-induced voiding in Cu damascene interconnects of ultra-large-scale integrated circuits

  Saitoh, T., Kawano, M. & Ueno, K., 2003 Jun, In: Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A. 69, 6, p. 964-971 8 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• 3 DIMENSIONAL MEASUREMENT OF CULTURAL HERITAGE AT TYRE, LEBANON

  NAKAGAWA, M., 2003 Jul 1, In: Proceedings of ISPRS WG V/4 and IC WGIII/V.

  Research output: Contribution to journal › Article › peer-review

• 3 dimensional-STEM of dispersed nano structures in materials

  Song, M., Ye, S., Takeguchi, M., Shimojo, M. & Furuya, K., 2011 Jan 1, In: Default journal.

  Research output: Contribution to journal › Article › peer-review

• 3D Modeling with Virtual Space -Touch and Deform the Virtual Object by 3D Interface Device (SPICE)-

  Adachi, Y., 1992 Oct 20, In: Japanese-France Congress of Mechatronics.

  Research output: Contribution to journal › Article › peer-review

• 3D myocardial contraction imaging based on dynamic grid interpolation: Theory and simulation analysis

  Bu, S., Shiina, T., Yamakawa, M. & Takizawa, H., 2007, In: IEEJ Transactions on Electronics, Information and Systems. 127, 10, p. 1732-1742+35

  Research output: Contribution to journal › Article › peer-review

  Open Access

• 3D object recognition in cluttered environments by segment-based stereo vision

  Sumi, Y., Kawai, Y., Yoshimi, T. & Tomita, F., 2002 Jan 1, In: International Journal of Computer Vision. 46, 1, p. 5-23 19 p.

  Research output: Contribution to journal › Article › peer-review
  51 Citations (Scopus)

• 3D printing of shape memory hydrogels with tunable mechanical properties

  Shiblee, MD. N. I., Ahmed, K., Khosla, A., Kawakami, M. & Furukawa, H., 2018, In: Soft Matter. 14, 38, p. 7809-7817 9 p.

  Research output: Contribution to journal › Article › peer-review
  52 Citations (Scopus)

• 3d puzzle in cube pattern for anisotropic/isotropic mechanical control of structure fabricated bymetal additivemanufacturing

  Ikeo, N., Fukuda, H., Matsugaki, A., Inoue, T., Serizawa, A., Matsuzaka, T., Ishimoto, T., Ozasa, R., Gokcekaya, O. & Nakano, T., 2021 Aug, In: Crystals. 11, 8, 959.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  13 Citations (Scopus)

• 3D SOKUIKI sensor module by roundly swinging mechanism and SCIP-3D command system

  Matsumoto, M., Yoshida, T., Mori, T. & Yuta, S., 2009 Dec, In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 75, 760, p. 3314-3323 10 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  4 Citations (Scopus)

• 3D SOKUIKI Sensor Module by Roundly Swinging Mechanism and SCIP-3D Interface

  Matsumoto, M. & Yuta, S., 2009 Oct 1, In: Default journal. p. 37-41

  Research output: Contribution to journal › Article › peer-review

• 3D structural analysis of meta-cleavage enzyme involved in bacterial degradation of environment pollutants

  Iwata, K. & Omori, T., 2006 Dec 4, In: Default journal.

  Research output: Contribution to journal › Article › peer-review

• 3D structural of the 2subunit type meta-cleavage enzyme, which is involved in carbazole degradation

  Iwata, K. & Omori, T., 2005 Oct 29, In: Default journal.

  Research output: Contribution to journal › Article › peer-review

• 3D TEM observation of xenon precipitates in aluminum crystals

  Song, M., Matsumoto, H., Shimojo, M. & Furuya, K., 2008 Sept 1, In: Default journal.

  Research output: Contribution to journal › Article › peer-review