Find Research outputs

Search results

• Conference contribution

  Study of high-speed SRM with amorphous steel sheet for EV

  Ueta, K. & Akatsu, K., 2017 Jan 30, 19th International Conference on Electrical Machines and Systems, ICEMS 2016. Institute of Electrical and Electronics Engineers Inc., 7837228

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  8 Citations (Scopus)

• Study of High-speed SRM with Amorphous steel sheet for EV

  Tomioka, T. & Akatsu, K., 2019 Aug, 2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019. Institute of Electrical and Electronics Engineers Inc., 8922014. (2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Study of high torque density interior permanent magnet synchronous motor with flexible orientation Nd₂Fe₁₄B sintered magnet

  Akune, R., Akatsu, K., Fujihara, M. & Yamamoto, T., 2016 Nov 2, Proceedings - 2016 22nd International Conference on Electrical Machines, ICEM 2016. Institute of Electrical and Electronics Engineers Inc., p. 578-584 7 p. 7732584. (Proceedings - 2016 22nd International Conference on Electrical Machines, ICEM 2016).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  7 Citations (Scopus)

• Study of Inverter Integrated SRM with Vector Control

  Matsumoto, M. & Akatsu, K., 2018 Nov 27, ICEMS 2018 - 2018 21st International Conference on Electrical Machines and Systems. Institute of Electrical and Electronics Engineers Inc., p. 1169-1174 6 p. 8549077. (ICEMS 2018 - 2018 21st International Conference on Electrical Machines and Systems).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Study of Inverter System in MATRIX motor

  Kasahara, R. & Akatsu, K., 2020 Nov 29, 2020 IEEE 9th International Power Electronics and Motion Control Conference, IPEMC 2020 ECCE Asia. Institute of Electrical and Electronics Engineers Inc., p. 160-165 6 p. 9368152. (2020 IEEE 9th International Power Electronics and Motion Control Conference, IPEMC 2020 ECCE Asia).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study of investigative methods into the deterioration of surface finishing materials for reinforced concrete used in urban collective housing

  Park, J. H., Hasegawa, T., Senbu, O., Hamasaki, H. & Kashino, N., 2010, Advances in Concrete Structural Durability - Proceedings of the 2nd International Conference on Durability of Concrete Structures, ICDCS 2010. Hokkaido University Press, p. 529-535 7 p. (Advances in Concrete Structural Durability - Proceedings of the 2nd International Conference on Durability of Concrete Structures, ICDCS 2010).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study of iron loss in Induction Motor made with Soft Magnetic Composite core based on Finite Element Analysis

  Matsumoto, T., Shimomura, S. & Morimoto, M., 2010, 2010 International Power Electronics Conference - ECCE Asia -, IPEC 2010. p. 270-277 8 p. 5542278. (2010 International Power Electronics Conference - ECCE Asia -, IPEC 2010).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  6 Citations (Scopus)

• Study of low energy micro ehd pump by designed electric field

  Sato, T., Maeda, S. & Yamanishi, Y., 2018 Dec, MHS 2018 - 2018 29th International Symposium on Micro-NanoMechatronics and Human Science. Institute of Electrical and Electronics Engineers Inc., 8886968. (MHS 2018 - 2018 29th International Symposium on Micro-NanoMechatronics and Human Science).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Study of Magnetic Circuit to Estimate Air Gap Magnetic Flux Density and Output Torque in Spoke Type Permanent Magnet Vernier Machine

  Takahashi, H. & Shimomura, S., 2020 Nov 24, 23rd International Conference on Electrical Machines and Systems, ICEMS 2020. Institute of Electrical and Electronics Engineers Inc., p. 894-897 4 p. 9291161. (23rd International Conference on Electrical Machines and Systems, ICEMS 2020).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Study of measuring method for corrosion behavior analysis in low concentration solution

  Yagi, Y., Suzuki, R. & Noda, K., 2016, Corrosion General Poster Session. Buchheit, R. & Virtanen, S. (eds.). 26 ed. Electrochemical Society Inc., p. 7-15 9 p. (ECS Transactions; vol. 75, no. 26).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study of Methods for Improving Strength and Durability of Low-Quality Recycled Aggregate Concrete

  Yuya, R., Matsuda, N., Kojima, M. & Iyoda, T., 2023, Proceedings of The 17th East Asian-Pacific Conference on Structural Engineering and Construction, 2022 - EASEC-17. Geng, G., Qian, X., Poh, L. H. & Pang, S. D. (eds.). Springer Science and Business Media Deutschland GmbH, p. 3-15 13 p. (Lecture Notes in Civil Engineering; vol. 302 LNCE).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study of morphogenesis of a large-span roof that satisfies its form design requirements: Two-purpose evaluation of image and mechanical rationality

  Takeda, Y. & Tsutsumi, K., 2011 Sept 27, FUZZ 2011 - 2011 IEEE International Conference on Fuzzy Systems - Proceedings. p. 1763-1766 4 p. 6007341. (IEEE International Conference on Fuzzy Systems).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study of Operator's Line of Sight in Unmanned Construction Systems

  Hashimoto, T., Yamauchi, G., Fujino, K., Yuta, S. & Tateyama, K., 2018 Sept 19, 2018 IEEE International Symposium on Safety, Security, and Rescue Robotics, SSRR 2018. Institute of Electrical and Electronics Engineers Inc., 8468635. (2018 IEEE International Symposium on Safety, Security, and Rescue Robotics, SSRR 2018).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Study of Switched Reluctance Motor Directly Driven by Commercial Three-phase Power Supply

  Takahashi, M., Aiso, K. & Akatsu, K., 2018 Oct 22, 2018 International Power Electronics Conference, IPEC-Niigata - ECCE Asia 2018. Institute of Electrical and Electronics Engineers Inc., p. 3186-3191 6 p. 8507682. (2018 International Power Electronics Conference, IPEC-Niigata - ECCE Asia 2018).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study of switching method for MATRIX motor realizing variable characteristic

  Sakai, Y., Hijikata, H., Akatsu, K., Miyama, Y. & Arita, H., 2016 Jul 13, 2016 IEEE 8th International Power Electronics and Motion Control Conference, IPEMC-ECCE Asia 2016. Institute of Electrical and Electronics Engineers Inc., p. 3012-3017 6 p. 7512776

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  4 Citations (Scopus)

• Study of the drive-timing for a standup motion-supporting mechanism for the elderly

  Nomura, S., Nakanishi, N., Matsuhira, N., Oogawara, T., Yoshimi, T. & Nakamoto, H., 2017 Jan 24, ICCAS 2016 - 2016 16th International Conference on Control, Automation and Systems, Proceedings. IEEE Computer Society, p. 526-530 5 p. 7832370

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study of the Winding Configuration in Linear Permanent Magnet Vernier Motors

  Moei, K. & Shimomura, S., 2022, 2022 International Conference on Electrical Machines and Systems, ICEMS 2022. Institute of Electrical and Electronics Engineers Inc., (2022 International Conference on Electrical Machines and Systems, ICEMS 2022).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study of user interface for browsing web contents that considers the cognitive features of older users

  Watanabe, M., Yonemura, S., Hashimoto, R. & Asano, Y., 2011, Design, User Experience and Usability: Theory, Methods, Tools and Practice - First International Conference, DUXU 2011, Held as Part of HCI International 2011, Proceedings. PART 2 ed. p. 60-67 8 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 6770 LNCS, no. PART 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study of variable reluctance vernier motor for hybrid electric vehicle

  Takano, M. & Shimomura, S., 2013 Sept 16, 2013 IEEE ECCE Asia Downunder - 5th IEEE Annual International Energy Conversion Congress and Exhibition, IEEE ECCE Asia 2013. p. 1341-1347 7 p. 6579284. (2013 IEEE ECCE Asia Downunder - 5th IEEE Annual International Energy Conversion Congress and Exhibition, IEEE ECCE Asia 2013).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  6 Citations (Scopus)

• Study on accessibility of urgent message transmission service in a disaster

  Yonemura, S. & Kamata, K., 2011 Jul 19, Human Interface and the Management of Information: Interacting with Information - Symposium on Human Interface 2011, Held as Part of HCI International 2011, Proceedings. PART 2 ed. p. 446-450 5 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 6772 LNCS, no. PART 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on a design guideline for determining transfer frequency in Wireless Power Transfer system^*

  Suzuki, T., Aiso, K., Kondo, K. & Aoyama, Y., 2021 May 24, Proceedings of the Energy Conversion Congress and Exposition - Asia, ECCE Asia 2021. Institute of Electrical and Electronics Engineers Inc., p. 805-810 6 p. 9479288. (Proceedings of the Energy Conversion Congress and Exposition - Asia, ECCE Asia 2021).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on a Proper Repair Cycle of Finishing Materials in Condominiums

  Ide, T., Hamasaki, H. & Soga, Y., 2020, Current Topics and Trends on Durability of Building Materials and Components - Proceedings of the 15th International Conference on Durability of Building Materials and Components, DBMC 2020. Serrat, C., Casas, J. R. & Gibert i Armengol, V. (eds.). International Center for Numerical Methods in Engineering, p. 183-190 8 p. (Current Topics and Trends on Durability of Building Materials and Components - Proceedings of the 15th International Conference on Durability of Building Materials and Components, DBMC 2020).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access
  1 Citation (Scopus)

• Study on bearing performance for inching worm locomotion using characteristics of wheel subsidence on loose soil

  Fujiwara, D. & Iizuka, K., 2018 Aug 30, AIM 2018 - IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Institute of Electrical and Electronics Engineers Inc., p. 930-935 6 p. 8452437. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM; vol. 2018-July).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Study on built-in cushion with relief valve for pneumatic cylinder

  Kawakami, Y., Satoh, K., Nakano, K. & Bando, T., 1999 Dec 1, Proceedings of the 3rd International Symposium on Fluid Power Transmission and Control (ISFP'99). Zuwen, W., Junwei, H., Songjing, L., Yaoming, X., Manlin, Z., Zuwen, W., Junwei, H., Songjing, L., Yaoming, X. & Manlin, Z. (eds.). p. 359-364 6 p. (Proceedings of the 3rd International Symposium on Fluid Power Transmission and Control (ISFP'99)).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  4 Citations (Scopus)

• Study on Connection between Vibration and Resistance Force from Loose Soil for Leg Typed Rovers

  Watanabe, T. & Iizuka, K., 2020 Sept 23, 2020 59th Annual Conference of the Society of Instrument and Control Engineers of Japan, SICE 2020. Institute of Electrical and Electronics Engineers Inc., p. 1399-1403 5 p. (2020 59th Annual Conference of the Society of Instrument and Control Engineers of Japan, SICE 2020).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on corrosion control in reactors using Radiation Induced Surface Activation (RISA) - Mechanism behind stainless steel durability due to RISA against crevice corrosion

  Mabuchi, S., Hazuku, T., Motoda, S. I., Takamasa, T., Uematsu, S. & Furuya, M., 2010, 18th International Conference on Nuclear Engineering, ICONE18. (International Conference on Nuclear Engineering, Proceedings, ICONE; vol. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on Departure Time Choice of Tourism Purpose Trips with the Perception of Predicted Near-future Traffic Condition-An Experiment Using a Mobile Application

  Le, Y., Aoyagi, S., Shimizu, T. & Takahashi, K., 2020 Sept, 2020 IEEE 5th International Conference on Intelligent Transportation Engineering, ICITE 2020. Institute of Electrical and Electronics Engineers Inc., p. 141-145 5 p. 9231518. (2020 IEEE 5th International Conference on Intelligent Transportation Engineering, ICITE 2020).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Study on Displaying Images to Prevent VR Sickness as Maintaining Rich-Presence

  Okuno, S. & Shimizu, S., 2022, 2022 International Power Electronics Conference, IPEC-Himeji 2022-ECCE Asia. Institute of Electrical and Electronics Engineers Inc., p. 268-273 6 p. (2022 International Power Electronics Conference, IPEC-Himeji 2022-ECCE Asia).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on driver distraction indexes using biological signals applying assessment of information display

  Ohkura, M., Takahashi, N., Seki, H., Saito, Y. & Hasegawa, K., 2013, 33rd Computers and Information in Engineering Conference. American Society of Mechanical Engineers, V02AT02A044. (Proceedings of the ASME Design Engineering Technical Conference; vol. 2 A).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Study on effectiveness of vibrating wheel's shape for improving running performance of small planetary exploration rovers with wheels on loose ground

  Watanabe, T. & Iizuka, K., 2021, 2021 6th International Conference on Mechanical Engineering and Robotics Research, ICMERR 2021. Institute of Electrical and Electronics Engineers Inc., p. 122-129 8 p. (2021 6th International Conference on Mechanical Engineering and Robotics Research, ICMERR 2021).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Study on emotional changes by visual movements and sounds in the virtual space: Focused on cases of producing digital wind-bell applications

  Seok, W. M., Yang, W. S., Jeung, J. H. & Pan, Y. H., 2010, Proceedings of the 7th International Conference on Design and Emotion. (Proceedings of the 7th International Conference on Design and Emotion).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on environment conscious technologies at a super tall building: Basic examination of dynamic draft skin system by steady CFD analysis

  Matsushita, T., Akimoto, T., Inomata, R., Hatori, D., Takanishi, S. & Nakamura, S., 2020, 16th Conference of the International Society of Indoor Air Quality and Climate: Creative and Smart Solutions for Better Built Environments, Indoor Air 2020. International Society of Indoor Air Quality and Climate, (16th Conference of the International Society of Indoor Air Quality and Climate: Creative and Smart Solutions for Better Built Environments, Indoor Air 2020).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on estimation technique of hydration on concrete in the mold by electrical resistance value

  Ota, M. & Iyoda, T., 2017, Life-Cycle of Engineering Systems: Emphasis on Sustainable Civil Infrastructure - 5th International Symposium on Life-Cycle Engineering, IALCCE 2016. CRC Press/Balkema, p. 1342-1352 11 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on evaluation of kawaii colors using visual analog scale

  Komatsu, T. & Ohkura, M., 2011 Jul 19, Human Interface and the Management of Information: Interacting with Information - Symposium on Human Interface 2011, Held as Part of HCI International 2011, Proceedings. PART 1 ed. p. 103-108 6 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 6771 LNCS, no. PART 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  9 Citations (Scopus)

• Study on fading prediction for automated guided vehicle using probabilistic neural network

  Webber, J., Suga, N., Mehbodniya, A., Yano, K. & Kumagai, T., 2019 Jan 16, 2018 Asia-Pacific Microwave Conference, APMC 2018 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 887-889 3 p. 8617190. (Asia-Pacific Microwave Conference Proceedings, APMC; vol. 2018-November).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  6 Citations (Scopus)

• Study on heat of hydration for cementitious materials focus on ground granulated blast-Furnace slag

  Iyoda, T., Kaneyasu, S. & Dan, Y., 2006, Materials, Experimentation, Maintenance and Rehabilitation - Proceedings of the 10th East Asia-Pacific Conference on Structural Engineering and Construction, EASEC 2010. p. 725-730 6 p. (Materials, Experimentation, Maintenance and Rehabilitation - Proceedings of the 10th East Asia-Pacific Conference on Structural Engineering and Construction, EASEC 2010).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on heat transfer characteristics of loop heat pipe for solar collector

  Sato, S., Hirasawa, S., Kawanami, T. & Shirai, K., 2012 Dec 1, ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012. PARTS A, B, C, D ed. p. 1573-1581 9 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 7, no. PARTS A, B, C, D).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Study on high frequency inverter with 100kHz current feedback control by using FPGA

  Amano, S. & Akatsu, K., 2014 Jan 1, 2014 17th International Conference on Electrical Machines and Systems, ICEMS 2014. Institute of Electrical and Electronics Engineers Inc., p. 3392-3397 6 p. 7014078. (2014 17th International Conference on Electrical Machines and Systems, ICEMS 2014).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Study on high speed milling of steam turbine blade materials - Difference in cutting characteristics by alloying elements of stainless steel

  Kimura, T., Sawa, T. & Kamijyo, T., 2016, Advances in Abrasive Technology XIX. Krajnik, P., Krajnik, P., Rashid, A., Aoyama, H., Xu, X. & Wang, J. (eds.). Trans Tech Publications Ltd, p. 439-444 6 p. (Materials Science Forum; vol. 874).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Study on high-speed milling of steam turbine blade materials - Differences in cutting characteristics of an unforged ingot and a forged part of stainless steel

  Kimura, T., Sawa, T. & Kamijyo, T., 2017, Recent Development in Machining, Materials and Mechanical Technologies II - IC3MT 2016. Fuh, Y. K. & Yamada, K. (eds.). Trans Tech Publications Ltd, p. 3-8 6 p. (Key Engineering Materials; vol. 749 KEM).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on high speed milling of steam turbine blade materials - Differences in cutting characteristics of titanium alloy and stainless steel

  Kimura, T., Kamijo, T. & Sawa, T., 2016 Jan 1, Advances in Abrasive Technology XIX. Krajnik, P., Krajnik, P., Rashid, A., Aoyama, H., Xu, X. & Wang, J. (eds.). Trans Tech Publications Ltd, p. 445-449 5 p. (Materials Science Forum; vol. 874).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Study on improvement of accuracy in end mill machining

  Iso, S., Toida, N., Ikeda, N., Kobayashi, Y., Shirai, K. & Tozawa, K., 2007 Dec 1, Proceedings of the 22nd Annual ASPE Meeting, ASPE 2007. (Proceedings of the 22nd Annual ASPE Meeting, ASPE 2007).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on low-cycle fatigue testing and therrmal fatigue life prediction of electroplated copper thin film for through hole via

  Watanabe, K., Yajima, N., Kariya, Y., Hiroshima, Y., Kikuchi, S., Matsui, A. & Shimizu, H., 2017 Jun 13, Proceedings of 2017 5th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2017. Institute of Electrical and Electronics Engineers Inc., p. 85 1 p. 7947481. (Proceedings of 2017 5th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2017).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on Mechanism of Pore Modification by Polymer Particles

  Yahiro, R., Kanda, T., Nishimura, K. & Iyoda, T., 2023, Proceedings of The 17th East Asian-Pacific Conference on Structural Engineering and Construction, 2022 - EASEC-17. Geng, G., Qian, X., Poh, L. H. & Pang, S. D. (eds.). Springer Science and Business Media Deutschland GmbH, p. 1358-1365 8 p. (Lecture Notes in Civil Engineering; vol. 302 LNCE).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on mobility mechanism using earth pressure to traverse loose soil with steep slope for Lunar exploration robot

  Iizuka, K., Oki, A., Suzuki, S. & Kawamura, T., 2014, MOVIC 2014 - 12th International Conference on Motion and Vibration Control. Japan Society of Mechanical Engineers

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on multi-sensor unit for monitoring of living space environment and classification of daily activities

  Hirasawa, K. & Saitoh, A., 2009 Dec 1, 2009 IEEE/SICE International Symposium on System Integration: SI International 2008 - The 2nd Symposium on System Integration. p. 101-106 6 p. 5384549. (2009 IEEE/SICE International Symposium on System Integration: SI International 2008 - The 2nd Symposium on System Integration).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Study on periodic thermal-switching behavior of flat heat pipe

  Hirasawa, S., Nakamu, T., Kawanami, T. & Shirai, K., 2015, Heat Transfer and Thermal Engineering. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 8B-2015).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Study on planetary rover using earth pressure to traverse loose soil with steep slope

  Iizuka, K., Oki, A., Suzuki, S. & Kawamura, T., 2014, 18th International Conference of the ISTVS. International Society for Terrain Vehicle Systems

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on Relationship between Traveling State and Chassis Strain at Traveling Loose Soil for Rovers

  Inaba, K. & Iizuka, K., 2021, 2021 6th International Conference on Mechanical Engineering and Robotics Research, ICMERR 2021. Institute of Electrical and Electronics Engineers Inc., p. 136-141 6 p. (2021 6th International Conference on Mechanical Engineering and Robotics Research, ICMERR 2021).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on the Applicability Considering on the Relationship between Shape and Flexibility of the Adsorption Gripper Tip

  Ofuchi, A., Fujiwara, D. & Iizuka, K., 2022, 2022 7th International Conference on Control and Robotics Engineering, ICCRE 2022. Institute of Electrical and Electronics Engineers Inc., p. 43-46 4 p. (2022 7th International Conference on Control and Robotics Engineering, ICCRE 2022).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution