Find Research outputs

Search results

• Study on Airless Variable Rigid Wheel to Travel Rigid and Loose Surface for UGV

  Iizuka, K., Nakamura, T. & Ishii, Y., 2020, Lecture Notes in Mechanical Engineering. Pleiades Publishing, p. 185-198 14 p. (Lecture Notes in Mechanical Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

• Study on a masuring method of three-dimensional position and orientation of a moving object

  Uchida, T., Adachi, T., Koyam, H., Komeda, T., Miyagi, M. & HiroyukiFunakubo, H., 1995 Dec 6, In: Proceedings of Biomedical & Rehabilitation Engineering.

  Research output: Contribution to journal › Article › peer-review

• Study on a Micromixing Device Utilizing Surface Tension Effect on Gas-Liquid Free Interface

  Yamada, T., Kato, N., Takeda, K. & Ono, N., 2011 Nov 9, In: Eighth International Conference on Flow Dynamics(Nov.9-11,2011,Sendai,Japan).

  Research output: Contribution to journal › Article › peer-review

• STUDY ON APPLICABILITY OF ELASTO-VISCOPLASTIC MODELS TO MECHANICAL PROPERTIES OF COMPACTED BENTONITE

  Namikawa, T., Hirai, T., Tanai, K., Yui, M., Sigeno, Y., Takaji, K. & Ohnuma, M., 2004 Jun 1, In: Doboku Gakkai Ronbunshuu C. 764, p. 367-372

  Research output: Contribution to journal › Article › peer-review

• Study on application of magnetic levitation utilizing HTS bulks to spin processors for photo mask production

  Fukui, S., Sato, R., Ogawa, J., Oka, T., Yamaguchi, M., Sato, T., Miyazaki, S., Sasahara, T., Tamaki, T., Nishiwaki, S. & Yuki, Y., 2007 Oct 1, In: Physica C: Superconductivity and its applications. 463-465, SUPPL., p. 1289-1292 4 p.

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)

• Study on Appropriate Evaluation of Efficiency of Cogeneration System

  MURAMAMI, K. & Murakami, K., 2005 Nov 24, In: Default journal. p. 227-233

  Research output: Contribution to journal › Article › peer-review

• Study on a Proper Repair Cycle of Finishing Materials in Condominiums

  Ide, T., Hamasaki, H. & Soga, Y., 2020, Current Topics and Trends on Durability of Building Materials and Components - Proceedings of the 15th International Conference on Durability of Building Materials and Components, DBMC 2020. Serrat, C., Casas, J. R. & Gibert i Armengol, V. (eds.). International Center for Numerical Methods in Engineering, p. 183-190 8 p. (Current Topics and Trends on Durability of Building Materials and Components - Proceedings of the 15th International Conference on Durability of Building Materials and Components, DBMC 2020).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access
  1 Citation (Scopus)

• Study on a simplified evaluation method of ultimate ground reaction force of pile group

  Ihara, K., Yagishita, F., Mase, T. & Hijikata, K., 2016 Nov, In: Journal of Structural and Construction Engineering. 81, 729, p. 1851-1858 8 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  1 Citation (Scopus)

• Study on aural message service by text coding for visually impaired and blind people

  Kamata, K. & Yonemura, S., 2011 Dec 28, p. 186-189. 4 p.

  Research output: Contribution to conference › Paper › peer-review

• Study on bearing performance for inching worm locomotion using characteristics of wheel subsidence on loose soil

  Fujiwara, D. & Iizuka, K., 2018 Aug 30, AIM 2018 - IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Institute of Electrical and Electronics Engineers Inc., p. 930-935 6 p. 8452437. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM; vol. 2018-July).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Study on built-in cushion with relief valve for pneumatic cylinder

  Kawakami, Y., Satoh, K., Nakano, K. & Bando, T., 1999 Dec 1, Proceedings of the 3rd International Symposium on Fluid Power Transmission and Control (ISFP'99). Zuwen, W., Junwei, H., Songjing, L., Yaoming, X., Manlin, Z., Zuwen, W., Junwei, H., Songjing, L., Yaoming, X. & Manlin, Z. (eds.). p. 359-364 6 p. (Proceedings of the 3rd International Symposium on Fluid Power Transmission and Control (ISFP'99)).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  4 Citations (Scopus)

• Study on characteristics and condition assessment of building system of 100 years old warehouse with timber and reinforced concrete as hybrid structure

  Ohtsuka, A., Imamoto, K. I., Noguchi, T., Kanematsu, M., Hamasaki, H., Kiyohara, C., Shiki, Y. & Kinose, T., 2016 Oct, In: AIJ Journal of Technology and Design. 22, 52, p. 1103-1106 4 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Study on characteristics of fluidics which uses magnetic fluid as working fluid.

  Kabei, N., Sakurai, Y., Katsurajima, Y. & Tsuchiya, K., 1982, Unknown Host Publication Title. Soc. Instrum. & Control Engrs

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

• Study on collector design of AlGaAs/GaAs heterojunction bipolar transistors by two-dimensional simulation

  Horio, K., Iwatsu, Y., Oguchi, A. & Yanai, H., 1990 Dec 1, p. 195-198. 4 p.

  Research output: Contribution to conference › Paper › peer-review

• Study on Confectionery Feeder

  Saeki, M., Honma, K., Miyazawa, Y. & Takano, E., 2000, In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 66, 643, p. 753-758 6 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Study on connection between kind of vibration and influence of ground for leg typed rovers

  Watanabe, T. & Iizuka, K., 2020 Jul 1, In: International Journal of Mechanical Engineering and Robotics Research. 9, 7, p. 979-986 8 p.

  Research output: Contribution to journal › Article › peer-review

• Study on connection between shape of wheel and resistance force from ground for small wheel typed rovers

  Watanabe, T. & Iizuka, K., 2020 Aug 19, In: IOP Conference Series: Materials Science and Engineering. 904, 1, 12007.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  1 Citation (Scopus)

• Study on Connection between Vibration and Resistance Force from Loose Soil for Leg Typed Rovers

  Watanabe, T. & Iizuka, K., 2020 Sept 23, 2020 59th Annual Conference of the Society of Instrument and Control Engineers of Japan, SICE 2020. Institute of Electrical and Electronics Engineers Inc., p. 1399-1403 5 p. (2020 59th Annual Conference of the Society of Instrument and Control Engineers of Japan, SICE 2020).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on controlled-release from anticancer drug capsule made by radiation induced polymerization at low temperature

  Yamada, A., Machiyama, E. & Kabei, N., 1979 Jan 1, In: Journal of Tokyo Women's Medical College. 49, 5, p. 481-490 10 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Study on control performance with consideration of articulated manipulators with pneumatic cylinders

  Murayama, E., Yogosawa, Y., Kawakami, Y., Horikawa, A., Shioda, K. & Ogawa, M., 2014 Mar, In: International Journal of Automation Technology. 8, 2, p. 159-168 10 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  1 Citation (Scopus)

• Study on corrosion control in reactors using Radiation Induced Surface Activation (RISA) - Mechanism behind stainless steel durability due to RISA against crevice corrosion

  Mabuchi, S., Hazuku, T., Motoda, S. I., Takamasa, T., Uematsu, S. & Furuya, M., 2010, 18th International Conference on Nuclear Engineering, ICONE18. (International Conference on Nuclear Engineering, Proceedings, ICONE; vol. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on crack propagation behavior in a quenched glass plate

  Sakaue, K., Yoneyama, S. & Takashi, M., 2009 Sept 1, In: Engineering Fracture Mechanics. 76, 13, p. 2011-2024 14 p.

  Research output: Contribution to journal › Article › peer-review
  15 Citations (Scopus)

• Study on curing of concrete by the end time judgment of the DC specific resistance

  Misaka, T. & Iyoda, T., 2013, In: Sustainable Construction Materials and Technologies. 2013-August, e313.

  Research output: Contribution to journal › Conference article › peer-review
  2 Citations (Scopus)

• Study on Daylight Energy and Sky factor as Environmental Indicators for making New Urban Form

  Shinozaki, M., 2002 Sept 1, In: CIB W101 Tokyo Conference, International Council for Research and Innovation in CIB W101 Tokyo Conference, International Council for Research and Innovation in Building and Construction.

  Research output: Contribution to journal › Article › peer-review

• Study on Departure Time Choice of Tourism Purpose Trips with the Perception of Predicted Near-future Traffic Condition-An Experiment Using a Mobile Application

  Le, Y., Aoyagi, S., Shimizu, T. & Takahashi, K., 2020 Sept, 2020 IEEE 5th International Conference on Intelligent Transportation Engineering, ICITE 2020. Institute of Electrical and Electronics Engineers Inc., p. 141-145 5 p. 9231518. (2020 IEEE 5th International Conference on Intelligent Transportation Engineering, ICITE 2020).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Study on desigining a comprehensive safety support system

  Kasuga, N., Okajima, F., Kawakami, K. & et.al., E. A., 2012 Oct 1, In: Default journal.

  Research output: Contribution to journal › Article › peer-review

• Study on designing a comprehensive driving safety support system-Survey analysis for designing an educational driving review system

  Okajima, F., Kawakami, K., Sawada, T., Sugimoto, Y., Takasu, Y. & Kasuga, N., 2012, p. AP-00103.

  Research output: Contribution to conference › Paper › peer-review

• Study on Designing an Human Machine Interface to Induce Careful Driving at Intersections

  Okajima, F., Kasuga, N. & Sawada, T., 2011 Oct 1, In: Proceedings of International Conference of Intelligent Transport System.

  Research output: Contribution to journal › Article › peer-review

• Study on desining a comprehensive safety support system

  Kasuga, N., Okajima, F., Kawakami, K. & et.al., E. A., 2012 Oct 1, In: Proceeding of World Congress of Intellingent Transport Systems, 2012.

  Research output: Contribution to journal › Article › peer-review

• Study on Displaying Images to Prevent VR Sickness as Maintaining Rich-Presence

  Okuno, S. & Shimizu, S., 2022, 2022 International Power Electronics Conference, IPEC-Himeji 2022-ECCE Asia. Institute of Electrical and Electronics Engineers Inc., p. 268-273 6 p. (2022 International Power Electronics Conference, IPEC-Himeji 2022-ECCE Asia).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on driver distraction indexes using biological signals applying assessment of information display

  Ohkura, M., Takahashi, N., Seki, H., Saito, Y. & Hasegawa, K., 2013, 33rd Computers and Information in Engineering Conference. American Society of Mechanical Engineers, V02AT02A044. (Proceedings of the ASME Design Engineering Technical Conference; vol. 2 A).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Study on effectiveness of vibrating wheel's shape for improving running performance of small planetary exploration rovers with wheels on loose ground

  Watanabe, T. & Iizuka, K., 2021, 2021 6th International Conference on Mechanical Engineering and Robotics Research, ICMERR 2021. Institute of Electrical and Electronics Engineers Inc., p. 122-129 8 p. (2021 6th International Conference on Mechanical Engineering and Robotics Research, ICMERR 2021).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Study on Effective Rainfall of Urban Catchment Area Using Conjunctive Surface-Subsurface Flow Model

  M.Morita, M. M., B.C.Yen, B. C. Y. & Morita, M., 1999 Aug 1, In: Proceedings of 8ht International Conference of Uuban Storm Drainage. p. 843-848

  Research output: Contribution to journal › Article › peer-review

• Study on efficiency improvement of packaged air conditioners for year round cooling with indirect outdoor air cooling (study on control methods of room air temperature and superheat)

  Uekusa, T., Yanagi, M., Kimijima, S. & Kawai, S., 2001 Aug, In: Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B. 67, 660, p. 2097-2101 5 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Study on emotional changes by visual movements and sounds in the virtual space: Focused on cases of producing digital wind-bell applications

  Seok, W. M., Yang, W. S., Jeung, J. H. & Pan, Y. H., 2010, Proceedings of the 7th International Conference on Design and Emotion. (Proceedings of the 7th International Conference on Design and Emotion).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on Energy Efficiency of Water Hydraulic Fluid Switching Transmission

  W.Kobayashi, W. K., K.Ito, K. I., S.Ikeo, S. I., T.Yamada, T. Y., K.Takahashi, K. T. & Ito, K., 2011 Oct 27, In: Proc. of the 8th JFPS International Symposium on Fluid Power 2011. p. 579-585

  Research output: Contribution to journal › Article › peer-review

• Study on energy-saving demagging process without air pollution

  Nagayama, K., Toyoda, K. & Tsumura, Y., 1983 Jan, In: Journal of Japan Institute of Light Metals. 33, 11, p. 655-659 5 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  2 Citations (Scopus)

• Study on environment conscious technologies at a super tall building: Basic examination of dynamic draft skin system by steady CFD analysis

  Matsushita, T., Akimoto, T., Inomata, R., Hatori, D., Takanishi, S. & Nakamura, S., 2020, 16th Conference of the International Society of Indoor Air Quality and Climate: Creative and Smart Solutions for Better Built Environments, Indoor Air 2020. International Society of Indoor Air Quality and Climate, (16th Conference of the International Society of Indoor Air Quality and Climate: Creative and Smart Solutions for Better Built Environments, Indoor Air 2020).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on environment conscious technologies in a super tall building: Evaluation of PV performance considering aerological climate

  Inomata, R., Akimoto, T., Hatori, D., Takanishi, S., Nakamura, S., Mochizuki, Y., Araki, N. & Yamashina, D., 2019 Aug 13, In: E3S Web of Conferences. 111, 03058.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Study on estimation technique of hydration on concrete in the mold by electrical resistance value

  Ota, M. & Iyoda, T., 2017, Life-Cycle of Engineering Systems: Emphasis on Sustainable Civil Infrastructure - 5th International Symposium on Life-Cycle Engineering, IALCCE 2016. CRC Press/Balkema, p. 1342-1352 11 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on evaluation of kawaii colors using visual analog scale

  Komatsu, T. & Ohkura, M., 2011 Jul 19, Human Interface and the Management of Information: Interacting with Information - Symposium on Human Interface 2011, Held as Part of HCI International 2011, Proceedings. PART 1 ed. p. 103-108 6 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 6771 LNCS, no. PART 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  9 Citations (Scopus)

• Study on factors affecting variation of friction coefficient in intermittent cutting of aluminum alloy A5052 with diamond-like carbon coated tool

  Yokota, T., Sawa, T. & Yokouchi, M., 2016, In: Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 82, 4, p. 354-359 6 p.

  Research output: Contribution to journal › Article › peer-review

• Study on fading prediction for automated guided vehicle using probabilistic neural network

  Webber, J., Suga, N., Mehbodniya, A., Yano, K. & Kumagai, T., 2019 Jan 16, 2018 Asia-Pacific Microwave Conference, APMC 2018 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 887-889 3 p. 8617190. (Asia-Pacific Microwave Conference Proceedings, APMC; vol. 2018-November).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  6 Citations (Scopus)

• Study on filtered maximum entropy image restoration of limited angle diffraction tomography

  Hamamoto, K., Shiina, T. & Nishimura, T., 1995, In: Annual International Conference of the IEEE Engineering in Medicine and Biology - Proceedings. 17, 1, p. 573-574 2 p.

  Research output: Contribution to journal › Conference article › peer-review

• Study on fluid dynamic performance and stress analysis of the oscillating disk-type centrifugal pump

  Kabei, N., Iida, H., Kanno, R., Sakurai, Y. & Tsuchiya, K., 1992 Jan 1, In: Japanese Journal of Artificial Organs. 21, 2, p. 507-513 7 p.

  Research output: Contribution to journal › Article › peer-review

• Study on Fracture Criterion of a Crack in a Weld Line between Two Defferent Steels

  UTSUNOMIYA, T., OKU, H., ISHII, T. & WATANABE, K., 1999 Jun 5, In: Asian Pacific Conference for Fracture and Strength`99.

  Research output: Contribution to journal › Article › peer-review

• Study on grouser mechanism to directly detect sinkage of wheel during traversing loose soil for lunar exploration rovers

  Iizuka, K., Sasaki, T., Suzuki, S., Kawamura, T. & Kubota, T., 2014 Dec 1, In: ROBOMECH Journal. 1, 1, 15.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)

• Study on heat of hydration for cementations materials focus on ground granulated blast-furnace slag

  IYODA, T., ShinjiKANEYASU, SANEYASU. & DAN, Y., 2006 Aug 1, In: Default journal.

  Research output: Contribution to journal › Article › peer-review

• Study on heat of hydration for cementitious materials focus on ground granulated blast-Furnace slag

  Iyoda, T., Kaneyasu, S. & Dan, Y., 2006, Materials, Experimentation, Maintenance and Rehabilitation - Proceedings of the 10th East Asia-Pacific Conference on Structural Engineering and Construction, EASEC 2010. p. 725-730 6 p. (Materials, Experimentation, Maintenance and Rehabilitation - Proceedings of the 10th East Asia-Pacific Conference on Structural Engineering and Construction, EASEC 2010).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on heat transfer characteristics of loop heat pipe for solar collector

  Sato, S., Hirasawa, S., Kawanami, T. & Shirai, K., 2012 Dec 1, ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012. PARTS A, B, C, D ed. p. 1573-1581 9 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 7, no. PARTS A, B, C, D).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)