A new proposal of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD - First trial to develop individually designed cuff-units for continuous blood pressure measurement

M. Ogawa; K. Motoi; T. Yamakoshi; M. Nogawa; Y. Yamakoshi; M. Shibata; Y. Yamakoshi

doi:10.1109/IEMBS.2011.6090992

A new proposal of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD - First trial to develop individually designed cuff-units for continuous blood pressure measurement

M. Ogawa, K. Motoi, T. Yamakoshi, M. Nogawa, Y. Yamakoshi, M. Shibata, Y. Yamakoshi

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Abstract

The concept of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD (3D-CAD) was proposed. This concept is to make individually designed and fabricated sensor unit to attach human body. Within the proposed concept, cuff-units for continuous blood pressure measurement were individually designed using 3D-CAD and fabricated automatically. As the result, blood pressure wave forms can be obtained using the finally developed cuff units. Using rapid prototyping device, the design and fabrication process were accelerated without any artisan-like high skilled persons.

Original language	English
Title of host publication	33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS 2011
Pages	3994-3997
Number of pages	4
DOIs	https://doi.org/10.1109/IEMBS.2011.6090992
Publication status	Published - 2011
Externally published	Yes
Event	33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS 2011 - Boston, MA, United States Duration: 2011 Aug 30 → 2011 Sept 3

Publication series

Name	Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS
ISSN (Print)	1557-170X

Conference

Conference	33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS 2011
Country/Territory	United States
City	Boston, MA
Period	11/8/30 → 11/9/3

ASJC Scopus subject areas

Signal Processing
Biomedical Engineering
Computer Vision and Pattern Recognition
Health Informatics

Access to Document

10.1109/IEMBS.2011.6090992

Cite this

Ogawa, M., Motoi, K., Yamakoshi, T., Nogawa, M., Yamakoshi, Y., Shibata, M., & Yamakoshi, Y. (2011). A new proposal of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD - First trial to develop individually designed cuff-units for continuous blood pressure measurement. In 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS 2011 (pp. 3994-3997). Article 6090992 (Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS). https://doi.org/10.1109/IEMBS.2011.6090992

A new proposal of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD - First trial to develop individually designed cuff-units for continuous blood pressure measurement. / Ogawa, M.; Motoi, K.; Yamakoshi, T. et al.
33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS 2011. 2011. p. 3994-3997 6090992 (Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Ogawa, M, Motoi, K, Yamakoshi, T, Nogawa, M, Yamakoshi, Y, Shibata, M & Yamakoshi, Y 2011, A new proposal of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD - First trial to develop individually designed cuff-units for continuous blood pressure measurement. in 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS 2011., 6090992, Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS, pp. 3994-3997, 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS 2011, Boston, MA, United States, 11/8/30. https://doi.org/10.1109/IEMBS.2011.6090992

Ogawa M, Motoi K, Yamakoshi T, Nogawa M, Yamakoshi Y, Shibata M et al. A new proposal of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD - First trial to develop individually designed cuff-units for continuous blood pressure measurement. In 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS 2011. 2011. p. 3994-3997. 6090992. (Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS). doi: 10.1109/IEMBS.2011.6090992

Ogawa, M. ; Motoi, K. ; Yamakoshi, T. et al. / A new proposal of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD - First trial to develop individually designed cuff-units for continuous blood pressure measurement. 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS 2011. 2011. pp. 3994-3997 (Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS).

@inproceedings{c404f00e2f40439e9cb63f6e0e501f88,

title = "A new proposal of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD - First trial to develop individually designed cuff-units for continuous blood pressure measurement",

abstract = "The concept of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD (3D-CAD) was proposed. This concept is to make individually designed and fabricated sensor unit to attach human body. Within the proposed concept, cuff-units for continuous blood pressure measurement were individually designed using 3D-CAD and fabricated automatically. As the result, blood pressure wave forms can be obtained using the finally developed cuff units. Using rapid prototyping device, the design and fabrication process were accelerated without any artisan-like high skilled persons.",

author = "M. Ogawa and K. Motoi and T. Yamakoshi and M. Nogawa and Y. Yamakoshi and M. Shibata and Y. Yamakoshi",

year = "2011",

doi = "10.1109/IEMBS.2011.6090992",

language = "English",

isbn = "9781424441211",

series = "Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS",

pages = "3994--3997",

booktitle = "33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS 2011",

note = "33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS 2011 ; Conference date: 30-08-2011 Through 03-09-2011",

}

TY - GEN

T1 - A new proposal of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD - First trial to develop individually designed cuff-units for continuous blood pressure measurement

AU - Ogawa, M.

AU - Motoi, K.

AU - Yamakoshi, T.

AU - Nogawa, M.

AU - Yamakoshi, Y.

AU - Shibata, M.

AU - Yamakoshi, Y.

PY - 2011

Y1 - 2011

N2 - The concept of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD (3D-CAD) was proposed. This concept is to make individually designed and fabricated sensor unit to attach human body. Within the proposed concept, cuff-units for continuous blood pressure measurement were individually designed using 3D-CAD and fabricated automatically. As the result, blood pressure wave forms can be obtained using the finally developed cuff units. Using rapid prototyping device, the design and fabrication process were accelerated without any artisan-like high skilled persons.

AB - The concept of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD (3D-CAD) was proposed. This concept is to make individually designed and fabricated sensor unit to attach human body. Within the proposed concept, cuff-units for continuous blood pressure measurement were individually designed using 3D-CAD and fabricated automatically. As the result, blood pressure wave forms can be obtained using the finally developed cuff units. Using rapid prototyping device, the design and fabrication process were accelerated without any artisan-like high skilled persons.

UR - http://www.scopus.com/inward/record.url?scp=84055176217&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84055176217&partnerID=8YFLogxK

U2 - 10.1109/IEMBS.2011.6090992

DO - 10.1109/IEMBS.2011.6090992

M3 - Conference contribution

C2 - 22255215

AN - SCOPUS:84055176217

SN - 9781424441211

T3 - Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS

SP - 3994

EP - 3997

BT - 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS 2011

T2 - 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS 2011

Y2 - 30 August 2011 through 3 September 2011

ER -

A new proposal of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD - First trial to develop individually designed cuff-units for continuous blood pressure measurement

Abstract

Publication series

Conference

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this