A research on the evaluation of grindability of fine-ceramics by constant pressure grinding (2nd Report) - Evaluation of the grindability based on change of removal rate

Takekazu Sawa; Yasuhiro Nagato; Yasushi Ikuse; Kuniaki Unno

doi:10.2493/jjspe.74.735

A research on the evaluation of grindability of fine-ceramics by constant pressure grinding (2nd Report) - Evaluation of the grindability based on change of removal rate

Takekazu Sawa, Yasuhiro Nagato, Yasushi Ikuse, Kuniaki Unno

Research output: Contribution to journal › Article › peer-review

Abstract

The grindability of fine-ceramics is the most important information in order to determine the optimum grinding conditions and dressing intervals. This study proposed the method of grindability evaluation of fine-ceramics by using removal rate in constant pressure grinding. The grindability evaluation is based on the change of removal rate accompanied by the increase in stock removal. As a result, the grindability could be evaluated quantitatively by using the change ratio of the removal rate on the basis of primary removal rate.

Original language	English
Pages (from-to)	735-739
Number of pages	5
Journal	Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering
Volume	74
Issue number	7
DOIs	https://doi.org/10.2493/jjspe.74.735
Publication status	Published - 2008 Jul
Externally published	Yes

Keywords

Constant pressure grinding
Diamond wheel
Fine-ceramics
Grindability
Removal rate

ASJC Scopus subject areas

Mechanical Engineering

Access to Document

10.2493/jjspe.74.735

Cite this

A research on the evaluation of grindability of fine-ceramics by constant pressure grinding (2nd Report) - Evaluation of the grindability based on change of removal rate. / Sawa, Takekazu; Nagato, Yasuhiro; Ikuse, Yasushi et al.

In: Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, Vol. 74, No. 7, 07.2008, p. 735-739.

Research output: Contribution to journal › Article › peer-review

@article{d4c8e3a0043a457d9d14e4be12afbf1b,

title = "A research on the evaluation of grindability of fine-ceramics by constant pressure grinding (2nd Report) - Evaluation of the grindability based on change of removal rate",

abstract = "The grindability of fine-ceramics is the most important information in order to determine the optimum grinding conditions and dressing intervals. This study proposed the method of grindability evaluation of fine-ceramics by using removal rate in constant pressure grinding. The grindability evaluation is based on the change of removal rate accompanied by the increase in stock removal. As a result, the grindability could be evaluated quantitatively by using the change ratio of the removal rate on the basis of primary removal rate.",

keywords = "Constant pressure grinding, Diamond wheel, Fine-ceramics, Grindability, Removal rate",

author = "Takekazu Sawa and Yasuhiro Nagato and Yasushi Ikuse and Kuniaki Unno",

year = "2008",

month = jul,

doi = "10.2493/jjspe.74.735",

language = "English",

volume = "74",

pages = "735--739",

journal = "Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering",

issn = "0912-0289",

publisher = "Japan Society for Precision Engineering",

number = "7",

}

TY - JOUR

T1 - A research on the evaluation of grindability of fine-ceramics by constant pressure grinding (2nd Report) - Evaluation of the grindability based on change of removal rate

AU - Sawa, Takekazu

AU - Nagato, Yasuhiro

AU - Ikuse, Yasushi

AU - Unno, Kuniaki

PY - 2008/7

Y1 - 2008/7

N2 - The grindability of fine-ceramics is the most important information in order to determine the optimum grinding conditions and dressing intervals. This study proposed the method of grindability evaluation of fine-ceramics by using removal rate in constant pressure grinding. The grindability evaluation is based on the change of removal rate accompanied by the increase in stock removal. As a result, the grindability could be evaluated quantitatively by using the change ratio of the removal rate on the basis of primary removal rate.

AB - The grindability of fine-ceramics is the most important information in order to determine the optimum grinding conditions and dressing intervals. This study proposed the method of grindability evaluation of fine-ceramics by using removal rate in constant pressure grinding. The grindability evaluation is based on the change of removal rate accompanied by the increase in stock removal. As a result, the grindability could be evaluated quantitatively by using the change ratio of the removal rate on the basis of primary removal rate.

KW - Constant pressure grinding

KW - Diamond wheel

KW - Fine-ceramics

KW - Grindability

KW - Removal rate

UR - http://www.scopus.com/inward/record.url?scp=77955348240&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=77955348240&partnerID=8YFLogxK

U2 - 10.2493/jjspe.74.735

DO - 10.2493/jjspe.74.735

M3 - Article

AN - SCOPUS:77955348240

SN - 0912-0289

VL - 74

SP - 735

EP - 739

JO - Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering

JF - Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering

IS - 7

ER -

A research on the evaluation of grindability of fine-ceramics by constant pressure grinding (2nd Report) - Evaluation of the grindability based on change of removal rate

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Cite this