TY - GEN
T1 - Development of an innovative water machining system employing the electric rust preventive method - precise evaluation of purity of the refined water with a laser turbidity meter
AU - Nishikawa, Naohiro
AU - Sawa, Takekazu
AU - Hagihara, Yoshihiro
AU - Yoshihara, Nobuhito
AU - Okawai, Hiroaki
AU - Iyama, Toshirou
AU - Mizuno, Masahiro
AU - Tsukamoto, Shinya
PY - 2013
Y1 - 2013
N2 - Green manufacturing is important subject. In order to reduce waste disposal cost and environmental load, decreasing machining fluid that contains several chemicals such as oil, extreme pressure agent etc. is demanded. In this investigation, the electric rust preventive machining method system that uses only water as machining fluid have been developed. This paper mentioned about evaluation of recycled water quality. The refined water that is purified with developed water recycle system which is installed reverse osmosis membrane (RO) is too clean to evaluate by normal method till now. Using laser turbidity meter, precise water purification is evaluated precisely. Therefore, it is clarified that RO refined water turbidity (RO1=0.0006, RO2=0.0003) is very low compared with clean tap water (0.1207). So, water recycle system can remove contaminating fine particle from water. It is expected that scratch less ultra precision machining with water is enabled to conduct with high filtration ability.
AB - Green manufacturing is important subject. In order to reduce waste disposal cost and environmental load, decreasing machining fluid that contains several chemicals such as oil, extreme pressure agent etc. is demanded. In this investigation, the electric rust preventive machining method system that uses only water as machining fluid have been developed. This paper mentioned about evaluation of recycled water quality. The refined water that is purified with developed water recycle system which is installed reverse osmosis membrane (RO) is too clean to evaluate by normal method till now. Using laser turbidity meter, precise water purification is evaluated precisely. Therefore, it is clarified that RO refined water turbidity (RO1=0.0006, RO2=0.0003) is very low compared with clean tap water (0.1207). So, water recycle system can remove contaminating fine particle from water. It is expected that scratch less ultra precision machining with water is enabled to conduct with high filtration ability.
KW - Electric rust preventive machining method
KW - Green manufacturing
KW - Laser turbidity meter
KW - Purification
KW - Removal
KW - Reverse osmosis membrane
KW - Turbidity
KW - Water machining
KW - Water recycle
UR - http://www.scopus.com/inward/record.url?scp=84886885634&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=84886885634&partnerID=8YFLogxK
U2 - 10.4028/www.scientific.net/AMR.797.293
DO - 10.4028/www.scientific.net/AMR.797.293
M3 - Conference contribution
AN - SCOPUS:84886885634
SN - 9783037858257
T3 - Advanced Materials Research
SP - 293
EP - 298
BT - Advances in Abrasive Technology XVI
T2 - 16th International Symposium on Advances in Abrasive Technology, ISAAT 2013 and 17th Chinese Conference of Abrasive Technology, CCAT 2013
Y2 - 23 September 2013 through 26 September 2013
ER -