TY - GEN
T1 - Evaluation of grinding performance by mechanical properties of super abrasive wheel -evaluation of grade by grinding force
AU - Takekazu, Sawa
AU - Naohiro, Nishikawa
AU - Yasushi, Ikuse
N1 - Publisher Copyright:
© (2015) Trans Tech Publications, Switzerland.
PY - 2015
Y1 - 2015
N2 - There is the grade as one of the selection criteria of a grinding wheel like WA whetstone or GC whetstone. The grade of grinding wheel is defined as an index which shows the strength of connection of a grain and a grain, and is usually estimated by bending strength. There are many papers about the relationship between the grade of a grinding wheel and the grinding performance. Relationship between the grade of a grinding wheel and the grinding performance is almost clear. Also, the relationship between mechanical properties of a grinding wheel and the grade is also clear. On the other hand, since the grain layer of a super abrasive grinding wheel is thin, it is difficult to apply the conventional evaluation test of the grade. The evaluation method of the grade which can be adapted the super abrasive grinding wheel is not established. In addition, since the grade of a super abrasive grinding wheel is a manufacture manufacturer's original standard, there is a minute difference by manufacturer. The super abrasive grinding wheel as well as the grinding wheel is conjectured that the grade influences the grinding performance. Namely, it is important to relate the grade and the mechanical properties of a grain layer. However, researches which relate the grade, the grinding performance and the mechanical properties of a super abrasive grinding wheel are not done so far. Therefore, this study examined the relationship between the mechanical properties of a grain layer of a super abrasive grinding wheel and the grade, the grinding performance. The final objective of this study is to evaluate the grinding performance from mechanical properties of a grain layer of a super abrasive grinding wheel. The purpose of this report is to clarify relationship between the grade and the grinding force in a resinoid bond diamond wheel. The specific experiment procedure is as follows. When carrying out surface grinding of the diamond sticks using a grinding wheel, the relationship of the grade and the grinding force was clarified. Based on the knowledge acquired in this experiment, relationship between the grade of a super abrasive grinding wheel and the grinding force was considered. As the results, it confirmed that the grade of a resinoid bond diamond wheel could be evaluated by the grinding force.
AB - There is the grade as one of the selection criteria of a grinding wheel like WA whetstone or GC whetstone. The grade of grinding wheel is defined as an index which shows the strength of connection of a grain and a grain, and is usually estimated by bending strength. There are many papers about the relationship between the grade of a grinding wheel and the grinding performance. Relationship between the grade of a grinding wheel and the grinding performance is almost clear. Also, the relationship between mechanical properties of a grinding wheel and the grade is also clear. On the other hand, since the grain layer of a super abrasive grinding wheel is thin, it is difficult to apply the conventional evaluation test of the grade. The evaluation method of the grade which can be adapted the super abrasive grinding wheel is not established. In addition, since the grade of a super abrasive grinding wheel is a manufacture manufacturer's original standard, there is a minute difference by manufacturer. The super abrasive grinding wheel as well as the grinding wheel is conjectured that the grade influences the grinding performance. Namely, it is important to relate the grade and the mechanical properties of a grain layer. However, researches which relate the grade, the grinding performance and the mechanical properties of a super abrasive grinding wheel are not done so far. Therefore, this study examined the relationship between the mechanical properties of a grain layer of a super abrasive grinding wheel and the grade, the grinding performance. The final objective of this study is to evaluate the grinding performance from mechanical properties of a grain layer of a super abrasive grinding wheel. The purpose of this report is to clarify relationship between the grade and the grinding force in a resinoid bond diamond wheel. The specific experiment procedure is as follows. When carrying out surface grinding of the diamond sticks using a grinding wheel, the relationship of the grade and the grinding force was clarified. Based on the knowledge acquired in this experiment, relationship between the grade of a super abrasive grinding wheel and the grinding force was considered. As the results, it confirmed that the grade of a resinoid bond diamond wheel could be evaluated by the grinding force.
KW - Diamond wheel
KW - Filler
KW - Grade
KW - Grinding force
KW - Grinding wheel
KW - Metal bond
KW - Resinoid bond
KW - Stick
KW - Super abrasive grinding wheel
UR - http://www.scopus.com/inward/record.url?scp=84952308692&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=84952308692&partnerID=8YFLogxK
U2 - 10.4028/www.scientific.net/KEM.656-657.266
DO - 10.4028/www.scientific.net/KEM.656-657.266
M3 - Conference contribution
AN - SCOPUS:84952308692
SN - 9783038354956
T3 - Key Engineering Materials
SP - 266
EP - 270
BT - Recent Development in Machining, Materials and Mechanical Technologies
A2 - Chen, Jyh-Chen
A2 - Hiroshi, Usuki
A2 - Lee, Sheng-Wei
A2 - Fuh, Yiin-Kuen
PB - Trans Tech Publications Ltd
T2 - International Conference on Machining, Materials and Mechanical Technologies, IC3MT 2014
Y2 - 31 August 2014 through 5 September 2014
ER -