Feasibility study on saturated water cooled solid oxide fuel cell stack

Mungmuang Promsen, Yosuke Komatsu, Anna Sciazko, Shozo Kaneko, Naoki Shikazono

Research output: Contribution to journalArticlepeer-review

18 Citations (Scopus)


In the present study, a novel concept of cooling solid oxide fuel cell (SOFC) stacks with phase change heat transfer of saturated water is proposed in order to provide an additional means to control the temperature distribution of SOFC stacks with small parasitic energy consumption. Three-dimensional computational fluid dynamics modeling with an electrochemistry solver is used to simulate the SOFC operations. By comparing the proposed water-cooled stack with the conventional air-cooled stack, it is found that water cooling significantly improves the temperature distribution inside the stack, leading to better electrochemical performance. The temperature difference of the tubular SOFC can be reduced from 295 K in the air-cooled stack to 62 K in the water-cooled stack with the same operating conditions. In the planar SOFC, it can be reduced from 185 K to 26 K. It is also shown that water cooling can greatly reduce the air flow rate in the stack without much affecting the thermal condition. Using water cooling, air utilization can be as high as 80%, leading to the reduction of parasitic air blowing power.

Original languageEnglish
Article number115803
JournalApplied Energy
Publication statusPublished - 2020 Dec 1
Externally publishedYes


  • CFD
  • Parasitic losses
  • Solid oxide fuel cell
  • Steam generation
  • Thermal management
  • Water cooling

ASJC Scopus subject areas

  • Mechanical Engineering
  • General Energy
  • Management, Monitoring, Policy and Law
  • Building and Construction
  • Renewable Energy, Sustainability and the Environment


Dive into the research topics of 'Feasibility study on saturated water cooled solid oxide fuel cell stack'. Together they form a unique fingerprint.

Cite this