Influence of Phosphorus Concentration and Heat Treatment on Anticavitation Erosion Characteristics in Electroless Nickel Plating

Shinobu Sugasawa; Shigeru Akiyama; Susumu Uematsu; Toshiaki Shibata; Toshiaki Iwata; Naoki Miyauchi; Fumihiro Fujita

doi:10.1299/kikaia.77.1976

Influence of Phosphorus Concentration and Heat Treatment on Anticavitation Erosion Characteristics in Electroless Nickel Plating

Shinobu Sugasawa, Shigeru Akiyama, Susumu Uematsu, Toshiaki Shibata, Toshiaki Iwata, Naoki Miyauchi, Fumihiro Fujita

Research output: Contribution to journal › Article › peer-review

Abstract

Cavitation erosion has been a serious problem in the use of turbomachineries such as ship propellers. In this paper, we proposed a technique to prevent cavitation erosion using electroless nickel-phosphorus plating (ENP). ENP was plated on JIS CAC703 (Ni-A1 Bronze), which is known as a material of ship propellers. We examined the anticavitation property of ENP by a vibratory cavitation apparatus based on ASTM G32. It was found that the mass loss of plated substrate can be decreased ten times less than that of substrate by selecting suitable heat treatment temperature for the concentration of phosphorus in ENP. Finally, the mechanism of erosion of ENP is discussed.

Original language	English
Pages (from-to)	1976-1985
Number of pages	10
Journal	Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A
Volume	77
Issue number	783
DOIs	https://doi.org/10.1299/kikaia.77.1976
Publication status	Published - 2011
Externally published	Yes

Keywords

Cavitation
Electroless Nickel-Phosphorus Plating
Erosion
Nickel-Aluminum-Bronze
Ship Propeller

ASJC Scopus subject areas

Materials Science(all)
Mechanics of Materials
Mechanical Engineering

Access to Document

10.1299/kikaia.77.1976

Cite this

Sugasawa, S., Akiyama, S., Uematsu, S., Shibata, T., Iwata, T., Miyauchi, N., & Fujita, F. (2011). Influence of Phosphorus Concentration and Heat Treatment on Anticavitation Erosion Characteristics in Electroless Nickel Plating. Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 77(783), 1976-1985. https://doi.org/10.1299/kikaia.77.1976

Influence of Phosphorus Concentration and Heat Treatment on Anticavitation Erosion Characteristics in Electroless Nickel Plating. / Sugasawa, Shinobu; Akiyama, Shigeru; Uematsu, Susumu et al.
In: Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, Vol. 77, No. 783, 2011, p. 1976-1985.

Research output: Contribution to journal › Article › peer-review

Sugasawa, S, Akiyama, S, Uematsu, S, Shibata, T, Iwata, T, Miyauchi, N & Fujita, F 2011, 'Influence of Phosphorus Concentration and Heat Treatment on Anticavitation Erosion Characteristics in Electroless Nickel Plating', Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, vol. 77, no. 783, pp. 1976-1985. https://doi.org/10.1299/kikaia.77.1976

@article{9f12261b672842f4a335aa8ac5afebb6,

title = "Influence of Phosphorus Concentration and Heat Treatment on Anticavitation Erosion Characteristics in Electroless Nickel Plating",

abstract = "Cavitation erosion has been a serious problem in the use of turbomachineries such as ship propellers. In this paper, we proposed a technique to prevent cavitation erosion using electroless nickel-phosphorus plating (ENP). ENP was plated on JIS CAC703 (Ni-A1 Bronze), which is known as a material of ship propellers. We examined the anticavitation property of ENP by a vibratory cavitation apparatus based on ASTM G32. It was found that the mass loss of plated substrate can be decreased ten times less than that of substrate by selecting suitable heat treatment temperature for the concentration of phosphorus in ENP. Finally, the mechanism of erosion of ENP is discussed.",

keywords = "Cavitation, Electroless Nickel-Phosphorus Plating, Erosion, Nickel-Aluminum-Bronze, Ship Propeller",

author = "Shinobu Sugasawa and Shigeru Akiyama and Susumu Uematsu and Toshiaki Shibata and Toshiaki Iwata and Naoki Miyauchi and Fumihiro Fujita",

year = "2011",

doi = "10.1299/kikaia.77.1976",

language = "English",

volume = "77",

pages = "1976--1985",

journal = "Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A",

issn = "0387-5008",

publisher = "Japan Society of Mechanical Engineers",

number = "783",

}

TY - JOUR

T1 - Influence of Phosphorus Concentration and Heat Treatment on Anticavitation Erosion Characteristics in Electroless Nickel Plating

AU - Sugasawa, Shinobu

AU - Akiyama, Shigeru

AU - Uematsu, Susumu

AU - Shibata, Toshiaki

AU - Iwata, Toshiaki

AU - Miyauchi, Naoki

AU - Fujita, Fumihiro

PY - 2011

Y1 - 2011

N2 - Cavitation erosion has been a serious problem in the use of turbomachineries such as ship propellers. In this paper, we proposed a technique to prevent cavitation erosion using electroless nickel-phosphorus plating (ENP). ENP was plated on JIS CAC703 (Ni-A1 Bronze), which is known as a material of ship propellers. We examined the anticavitation property of ENP by a vibratory cavitation apparatus based on ASTM G32. It was found that the mass loss of plated substrate can be decreased ten times less than that of substrate by selecting suitable heat treatment temperature for the concentration of phosphorus in ENP. Finally, the mechanism of erosion of ENP is discussed.

AB - Cavitation erosion has been a serious problem in the use of turbomachineries such as ship propellers. In this paper, we proposed a technique to prevent cavitation erosion using electroless nickel-phosphorus plating (ENP). ENP was plated on JIS CAC703 (Ni-A1 Bronze), which is known as a material of ship propellers. We examined the anticavitation property of ENP by a vibratory cavitation apparatus based on ASTM G32. It was found that the mass loss of plated substrate can be decreased ten times less than that of substrate by selecting suitable heat treatment temperature for the concentration of phosphorus in ENP. Finally, the mechanism of erosion of ENP is discussed.

KW - Cavitation

KW - Electroless Nickel-Phosphorus Plating

KW - Erosion

KW - Nickel-Aluminum-Bronze

KW - Ship Propeller

UR - http://www.scopus.com/inward/record.url?scp=85024465110&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85024465110&partnerID=8YFLogxK

U2 - 10.1299/kikaia.77.1976

DO - 10.1299/kikaia.77.1976

M3 - Article

AN - SCOPUS:85024465110

SN - 0387-5008

VL - 77

SP - 1976

EP - 1985

JO - Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A

JF - Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A

IS - 783

ER -

Influence of Phosphorus Concentration and Heat Treatment on Anticavitation Erosion Characteristics in Electroless Nickel Plating

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this