Kinetic and Magic Angle Spinning-Nuclear Magnetic Resonance Studies of Dry Oxidation of Beta-Sialon Powders

Hajime Kiyono, Shiro Shimada

Research output: Contribution to journalArticlepeer-review

1 Citation (Scopus)


The oxidation of α-Si3N4 and β-sialon (Si6-z AlzOzN8-z) powders with the different z values (z = 1, 2, 3) in a dry atmosphere of Ar/O2 (80/20 kPa) at 1000-1300°C was studied by X-ray diffraction, 29Si and 27Al magic-angle spinning-nuclear magnetic resonance (MAS-NMR), transmission electron microscopy (TEM), and thermogravimetric analysis. The oxidation products of the β-sialons consisted of amorphous SiO2 and aluminosilicate, the latter crystallizing to mullite at T ≥ 1200°C. Very fine acicular mullite grains were formed in the oxidized particles as confirmed by TEM. The initial oxidation kinetics can be described by a two-stage linear law for a degree of reaction less than 10%, followed by parabolic oxidation at 10-60% reaction. In both the linear and parabolic kinetic regions, the oxidation rate constants were very similar for the three sialons but were smaller for α-Si3N4. The activation energies for the linear kinetic regions were 260, 260, 300, and 270 kJ mol 1 for α-Si3N4 and the β-sialons with z = 1, 2, and 3, respectively, whereas the corresponding values for the diffusion process were 410, 430, 410, and 380 kJ mol 1. The oxidation mechanism is discussed on the basis of the X-ray diffraction, 29Si and 27Al MAS-NMR, and kinetic results.

Original languageEnglish
Pages (from-to)B79-B85
JournalJournal of the Electrochemical Society
Issue number2
Publication statusPublished - 2001 Dec 1
Externally publishedYes

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Renewable Energy, Sustainability and the Environment
  • Surfaces, Coatings and Films
  • Electrochemistry
  • Materials Chemistry


Dive into the research topics of 'Kinetic and Magic Angle Spinning-Nuclear Magnetic Resonance Studies of Dry Oxidation of Beta-Sialon Powders'. Together they form a unique fingerprint.

Cite this