TY - JOUR
T1 - Oil Palm’s Empty Fruit Bunch as a Sorbent Material in Filter System for Oil-Spill Clean Up
AU - Puasa, Nurul Aini
AU - Ahmad, Siti Aqlima
AU - Zakaria, Nur Nadhirah
AU - Khalil, Khalilah Abdul
AU - Taufik, Siti Hajar
AU - Zulkharnain, Azham
AU - Azmi, Alyza Azzura
AU - Gomez-Fuentes, Claudio
AU - Wong, Chiew Yen
AU - Shaharuddin, Noor Azmi
N1 - Funding Information:
Funding: This project was financially supported by Putra-IPM fund under the research grant attached to S.A. Ahmad (GPM-2019/9678900) disbursed by Universiti Putra Malaysia (UPM). C. Gomez-Fuentes is supported by Centro de Investigacion y Monitoreo Ambiental Antàrctico (CIMAA). N.A. Puasa and S.H. Taufik are funded by a personal scholarship from Majlis Amanah Rakyat (MARA).
Funding Information:
This project was financially supported by Putra-IPM fund under the research grant attached to S.A. Ahmad (GPM-2019/9678900) disbursed by Universiti Putra Malaysia (UPM). C. Gomez-Fuentes is supported by Centro de Investigacion y Monitoreo Ambiental Ant?rctico (CIMAA). N.A. Puasa and S.H. Taufik are funded by a personal scholarship from Majlis Amanah Rakyat (MARA).
Publisher Copyright:
© 2022 by the authors. Licensee MDPI, Basel, Switzerland.
PY - 2022/1/1
Y1 - 2022/1/1
N2 - Oil pollution such as diesel poses a significant threat to the environment. Due to this, there is increasing interest in using natural materials mainly from agricultural waste as organic oil spill sorbents. Oil palm’s empty fruit bunch (EFB), a cost-effective material, non-toxic, renewable resource, and abundantly available in Malaysia, contains cellulosic materials that have been proven to show a good result in pollution treatment. This study evaluated the optimum screening part of EFB that efficiently absorbs oil and the physicochemical characterisation of untreated and treated EFB fibre using Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscopy (SEM). The treatment conditions were optimised using one-factor-at-a-time (OFAT), which identified optimal treatment conditions of 170◦ C, 20 min, 0.1 g/cm3, and 10% diesel, resulting in 23 mL of oil absorbed. The predicted model was highly significant in statistical Response Surface Methodology (RSM) and confirmed that all the parameters (temperature, time, packing density, and diesel concentration) significantly influenced the oil absorbed. The predicted values in RSM were 175◦ C, 22.5 min, 0.095 g/cm3, and 10%, which resulted in 24 mL of oil absorbed. Using the experimental values generated by RSM, 175◦ C, 22.5 min, 0.095 g/cm3, and 10%, the highest oil absorption achieved was 24.33 mL. This study provides further evidence, as the data suggested that RSM provided a better approach to obtain a high efficiency of oil absorbed.
AB - Oil pollution such as diesel poses a significant threat to the environment. Due to this, there is increasing interest in using natural materials mainly from agricultural waste as organic oil spill sorbents. Oil palm’s empty fruit bunch (EFB), a cost-effective material, non-toxic, renewable resource, and abundantly available in Malaysia, contains cellulosic materials that have been proven to show a good result in pollution treatment. This study evaluated the optimum screening part of EFB that efficiently absorbs oil and the physicochemical characterisation of untreated and treated EFB fibre using Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscopy (SEM). The treatment conditions were optimised using one-factor-at-a-time (OFAT), which identified optimal treatment conditions of 170◦ C, 20 min, 0.1 g/cm3, and 10% diesel, resulting in 23 mL of oil absorbed. The predicted model was highly significant in statistical Response Surface Methodology (RSM) and confirmed that all the parameters (temperature, time, packing density, and diesel concentration) significantly influenced the oil absorbed. The predicted values in RSM were 175◦ C, 22.5 min, 0.095 g/cm3, and 10%, which resulted in 24 mL of oil absorbed. Using the experimental values generated by RSM, 175◦ C, 22.5 min, 0.095 g/cm3, and 10%, the highest oil absorption achieved was 24.33 mL. This study provides further evidence, as the data suggested that RSM provided a better approach to obtain a high efficiency of oil absorbed.
KW - Absorbed
KW - Agriculture waste
KW - Diesel spills
KW - Fibre
KW - Sorption capacity
KW - Treated
UR - http://www.scopus.com/inward/record.url?scp=85122109093&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85122109093&partnerID=8YFLogxK
U2 - 10.3390/plants11010127
DO - 10.3390/plants11010127
M3 - Article
AN - SCOPUS:85122109093
SN - 2223-7747
VL - 11
JO - Plants
JF - Plants
IS - 1
M1 - 127
ER -