Preparation and properties of Bi4Ti3O12 thin films grown at low substrate temperatures

Masaki Yamaguchi, Takao Nagatomo

Research output: Contribution to journalArticlepeer-review

30 Citations (Scopus)


Bismuth titanate (Bi4Ti3O12) thin films were deposited on a (100) silicon substrate at a substrate temperature of 500°C, using rf magnetron sputtering. Ferroelectric Bi4Ti3O12 thin films were deposited on the pyrochlore phase buffer layer. The pyrochlore phase buffer layer was effective for lowering substrate temperature and suppressed the growth of the plate-like grains. The apparent remanent polarization and the apparent coercive field of this film at the measurement frequency of 50 Hz were estimated to be 2.4 μC cm-2 and 2.3 kV cm-1, respectively. The apparent remanent polarization was degraded to approximately 40% of the initial value by 1 × 106 switching cycles. The capacitance-voltage hysteresis loop of Bi4Ti3O12 thin film on silicon substrate is observed to correspond to ferroelectricity.

Original languageEnglish
Pages (from-to)294-298
Number of pages5
JournalThin Solid Films
Issue number1
Publication statusPublished - 1999 Jul 6

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Surfaces and Interfaces
  • Surfaces, Coatings and Films
  • Metals and Alloys
  • Materials Chemistry


Dive into the research topics of 'Preparation and properties of Bi4Ti3O12 thin films grown at low substrate temperatures'. Together they form a unique fingerprint.

Cite this