Reducing signal transmission loss by low surface roughness

Taka Aki Okubo; Toshio Sudo; Toshihiro Hosoi; Hiroaki Tsuyoshi; Fujio Kuwako

Reducing signal transmission loss by low surface roughness

Taka Aki Okubo, Toshio Sudo, Toshihiro Hosoi, Hiroaki Tsuyoshi, Fujio Kuwako

Research output: Contribution to conference › Paper › peer-review

Abstract

Higher-speed signal transmission is strongly required on a printed circuit board to handle massive data in electronic systems. So, signal transmission loss of copper wiring on a printed circuit board has been studied. First, total signal loss was divided into dielectric loss and conductor loss quantitatively based on electromagnetic theory. In particular, the scattering loss due to surface roughness of copper foil has been examined in detail. And the usefulness of the copper foil with low surface roughness has been demonstrated.

Original language	English
Publication status	Published - 2014 Jan 1
Event	DesignCon 2014: Where the Chip Meets the Board - Santa Clara, CA, United States Duration: 2014 Jan 28 → 2014 Jan 31

Conference

Conference	DesignCon 2014: Where the Chip Meets the Board
Country/Territory	United States
City	Santa Clara, CA
Period	14/1/28 → 14/1/31

ASJC Scopus subject areas

Computer Graphics and Computer-Aided Design
Human-Computer Interaction

Cite this

@conference{3c60f526db374588acecb3ed15c1f0c2,

title = "Reducing signal transmission loss by low surface roughness",

abstract = "Higher-speed signal transmission is strongly required on a printed circuit board to handle massive data in electronic systems. So, signal transmission loss of copper wiring on a printed circuit board has been studied. First, total signal loss was divided into dielectric loss and conductor loss quantitatively based on electromagnetic theory. In particular, the scattering loss due to surface roughness of copper foil has been examined in detail. And the usefulness of the copper foil with low surface roughness has been demonstrated.",

author = "Okubo, {Taka Aki} and Toshio Sudo and Toshihiro Hosoi and Hiroaki Tsuyoshi and Fujio Kuwako",

year = "2014",

month = jan,

day = "1",

language = "English",

note = "DesignCon 2014: Where the Chip Meets the Board ; Conference date: 28-01-2014 Through 31-01-2014",

}

TY - CONF

T1 - Reducing signal transmission loss by low surface roughness

AU - Okubo, Taka Aki

AU - Sudo, Toshio

AU - Hosoi, Toshihiro

AU - Tsuyoshi, Hiroaki

AU - Kuwako, Fujio

PY - 2014/1/1

Y1 - 2014/1/1

N2 - Higher-speed signal transmission is strongly required on a printed circuit board to handle massive data in electronic systems. So, signal transmission loss of copper wiring on a printed circuit board has been studied. First, total signal loss was divided into dielectric loss and conductor loss quantitatively based on electromagnetic theory. In particular, the scattering loss due to surface roughness of copper foil has been examined in detail. And the usefulness of the copper foil with low surface roughness has been demonstrated.

AB - Higher-speed signal transmission is strongly required on a printed circuit board to handle massive data in electronic systems. So, signal transmission loss of copper wiring on a printed circuit board has been studied. First, total signal loss was divided into dielectric loss and conductor loss quantitatively based on electromagnetic theory. In particular, the scattering loss due to surface roughness of copper foil has been examined in detail. And the usefulness of the copper foil with low surface roughness has been demonstrated.

UR - http://www.scopus.com/inward/record.url?scp=84904093178&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84904093178&partnerID=8YFLogxK

M3 - Paper

AN - SCOPUS:84904093178

T2 - DesignCon 2014: Where the Chip Meets the Board

Y2 - 28 January 2014 through 31 January 2014

ER -

Reducing signal transmission loss by low surface roughness

Abstract

Conference

ASJC Scopus subject areas

Other files and links

Fingerprint

Cite this