Verification on asbestos release during surface preparation of deteriorated asbestos containing cement sheets

Akihito Hayashi; Kenji Motohashi; Junko Koga; Masataka Tamura

doi:10.3130/aijt.18.421

Verification on asbestos release during surface preparation of deteriorated asbestos containing cement sheets

Akihito Hayashi, Kenji Motohashi, Junko Koga, Masataka Tamura

Research output: Contribution to journal › Article › peer-review

Abstract

Asbestos cement sheets used under outdoor condition may need surface treatment because of deterioration. Surface preparation of deteriorated asbestos cement sheets may cause asbestos fibers release during surface preparation. However, technical information about fibers release is not enough to design countermeasures for surface preparation of deteriorated asbestos cement sheets at present. In this study, airborne fibrous particles concentration was measured under several ways of surface preparation of existed deteriorated cement sheets containing asbestos, and asbestos fibers in waste water and dust were also analyzed in order to develop safe surface preparation methods for deteriorated asbestos cement sheets.

Original language	English
Pages (from-to)	421-426
Number of pages	6
Journal	AIJ Journal of Technology and Design
Volume	18
Issue number	39
DOIs	https://doi.org/10.3130/aijt.18.421
Publication status	Published - 2012
Externally published	Yes

Keywords

Asbestos
Asbestos fiber release
Cement sheets
Substrate for painting
Substrate preparation

ASJC Scopus subject areas

Architecture
Building and Construction

Access to Document

10.3130/aijt.18.421

Cite this

@article{e3f58b3bec5248019b4326da2269d1ef,

title = "Verification on asbestos release during surface preparation of deteriorated asbestos containing cement sheets",

abstract = "Asbestos cement sheets used under outdoor condition may need surface treatment because of deterioration. Surface preparation of deteriorated asbestos cement sheets may cause asbestos fibers release during surface preparation. However, technical information about fibers release is not enough to design countermeasures for surface preparation of deteriorated asbestos cement sheets at present. In this study, airborne fibrous particles concentration was measured under several ways of surface preparation of existed deteriorated cement sheets containing asbestos, and asbestos fibers in waste water and dust were also analyzed in order to develop safe surface preparation methods for deteriorated asbestos cement sheets.",

keywords = "Asbestos, Asbestos fiber release, Cement sheets, Substrate for painting, Substrate preparation",

author = "Akihito Hayashi and Kenji Motohashi and Junko Koga and Masataka Tamura",

year = "2012",

doi = "10.3130/aijt.18.421",

language = "English",

volume = "18",

pages = "421--426",

journal = "AIJ Journal of Technology and Design",

issn = "1341-9463",

publisher = "Architectural Institute of Japan",

number = "39",

}

TY - JOUR

T1 - Verification on asbestos release during surface preparation of deteriorated asbestos containing cement sheets

AU - Hayashi, Akihito

AU - Motohashi, Kenji

AU - Koga, Junko

AU - Tamura, Masataka

PY - 2012

Y1 - 2012

N2 - Asbestos cement sheets used under outdoor condition may need surface treatment because of deterioration. Surface preparation of deteriorated asbestos cement sheets may cause asbestos fibers release during surface preparation. However, technical information about fibers release is not enough to design countermeasures for surface preparation of deteriorated asbestos cement sheets at present. In this study, airborne fibrous particles concentration was measured under several ways of surface preparation of existed deteriorated cement sheets containing asbestos, and asbestos fibers in waste water and dust were also analyzed in order to develop safe surface preparation methods for deteriorated asbestos cement sheets.

AB - Asbestos cement sheets used under outdoor condition may need surface treatment because of deterioration. Surface preparation of deteriorated asbestos cement sheets may cause asbestos fibers release during surface preparation. However, technical information about fibers release is not enough to design countermeasures for surface preparation of deteriorated asbestos cement sheets at present. In this study, airborne fibrous particles concentration was measured under several ways of surface preparation of existed deteriorated cement sheets containing asbestos, and asbestos fibers in waste water and dust were also analyzed in order to develop safe surface preparation methods for deteriorated asbestos cement sheets.

KW - Asbestos

KW - Asbestos fiber release

KW - Cement sheets

KW - Substrate for painting

KW - Substrate preparation

UR - http://www.scopus.com/inward/record.url?scp=84864198138&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84864198138&partnerID=8YFLogxK

U2 - 10.3130/aijt.18.421

DO - 10.3130/aijt.18.421

M3 - Article

AN - SCOPUS:84864198138

SN - 1341-9463

VL - 18

SP - 421

EP - 426

JO - AIJ Journal of Technology and Design

JF - AIJ Journal of Technology and Design

IS - 39

ER -

Verification on asbestos release during surface preparation of deteriorated asbestos containing cement sheets

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this