年別の研究成果
年別の研究成果
- 1 - 50 / 114 件
検索結果
-
2023
Terahertz (THz) Wave Imaging in Civil Engineering to Assess Self-Healing of Fiber-Reinforced Cementitious Composites (FRCC)
Nishiwaki, T., Shimizu, K., Tanabe, T., Gardner, D. & Maddalena, R., 2023 1月, In: Journal of Advanced Concrete Technology. 21, 1, p. 58-75 18 p.研究成果: Article › 査読
Open Access -
2022
A novel superplastic dieless drawing using fracture phenomenon for fabrication of metal tubular microneedles
Yi, Y., Shinomiya, K., Kobayashi, R., Komine, H., Yoshihara, S. & Furushima, T., 2022 1月, In: CIRP Annals - Manufacturing Technology. 71, 1, p. 237-240 4 p.研究成果: Article › 査読
-
New Terahertz Wave Sorting Technology to Improve Plastic Containers and Packaging Waste Recycling in Japan
Yu, J., Liu, X., Manago, G., Tanabe, T., Osanai, S. & Okubo, K., 2022 10月, In: Recycling. 7, 5, 66.研究成果: Article › 査読
Open Access -
Selective crystal growth of indium selenide compounds from saturated solutions grown in a selenium vapor
Tang, C., Sato, Y., Watanabe, K., Tanabe, T. & Oyama, Y., 2022 3月, In: Results in Materials. 13, 100253.研究成果: Article › 査読
Open Access2 被引用数 (Scopus) -
Tool Wear and Surface Roughness Characteristics in the High-Speed Milling of Pure Ti and Ti Alloy Using TiAlN Coated Carbide Radius End Mill
Jaingam, T., Kaminaga, C., Sawa, T. & Anzai, M., 2022 3月, In: International Journal of Automation Technology. 16, 2, p. 230-237 8 p.研究成果: Article › 査読
Open Access1 被引用数 (Scopus) -
2021
Design Evaluation in Architecture Education with an Affordance-Based Approach Utilizing Non-Virtual Reality and Virtual Reality Media
Agirachman, F. A. & Shinozaki, M., 2021, In: Technology Architecture and Design. 5, 2, p. 188-206 19 p.研究成果: Article › 査読
3 被引用数 (Scopus) -
Developing climate-led landscapes and greenery in urban design: a case study at Ipoh, Malaysia
Teoh, M. Y., Shinozaki, M., Saito, K. & Said, I., 2021, (Accepted/In press) In: Journal of Asian Architecture and Building Engineering.研究成果: Article › 査読
Open Access1 被引用数 (Scopus) -
Fatigue properties of az31b magnesium alloy processed by equal-channel angular pressing
Yamada, R., Yoshihara, S. & Ito, Y., 2021 8月, In: Metals. 11, 8, 1191.研究成果: Article › 査読
Open Access6 被引用数 (Scopus) -
Fundamental study on derivation of elastic modulus and quality estimate of abrasive layer of super abrasive wheel using surface wave propagation velocity
Sawa, T., 2021, In: Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 87, 4, p. 388-392 5 p.研究成果: Article › 査読
Open Access -
On the stokes geometry of perturbed tangential pearcey systems dedicated to professor m. Kashiwara on his seventieth birthday
Hirose, S., Kawai, T., Sasaki, S. & Takei, Y., 2021, In: Publications of the Research Institute for Mathematical Sciences. 57, 3-4, p. 727-754 28 p.研究成果: Article › 査読
-
Optical and Electrical Properties of InxGa1−xSe Mixed Crystal Grown from Indium Flux by Traveling Heater Method
Sato, Y., Tang, C., Watanabe, K., Nakajima, M., Yamamoto, T., Tezuka, N., Tanabe, T. & Oyama, Y., 2021 5月, In: Journal of Electronic Materials. 50, 5, p. 2649-2655 7 p.研究成果: Article › 査読
-
Raman and TEM characterization of 2D layered MoS2 crystals grown on non-metal surfaces by friction-induced synthesis
Tanabe, T., Osaki, J., Miyajima, M., Kitamura, K. & Oyama, Y., 2021 9月 30, In: Applied Surface Science. 561, 150016.研究成果: Article › 査読
6 被引用数 (Scopus) -
Variable forgetting factor-based adaptive Kalman filter with disturbance estimation considering observation noise reduction
Ohhira, T., Shimada, A. & Murakami, T., 2021, In: IEEE Access. 9, p. 100747-100756 10 p., 9486918.研究成果: Article › 査読
Open Access1 被引用数 (Scopus) -
2020
Development of a sit-to-stand assistance chair for elderly people
Aharari, A. & Yang, W. S., 2020, In: International Journal of Reasoning-based Intelligent Systems. 12, 2, p. 149-155 7 p.研究成果: Article › 査読
-
Enhancement of spin-charge current interconversion by oxidation of rhenium
Karube, S., Sugawara, D., Tang, C., Tanabe, T., Oyama, Y. & Nitta, J., 2020 12月 15, In: Journal of Magnetism and Magnetic Materials. 516, 167298.研究成果: Article › 査読
4 被引用数 (Scopus) -
Influence of internal pressure and axial compressive displacement on the formability of small-diameter ZM21 magnesium alloy tubes in warm tube hydroforming
Yasui, H., Miyagawa, T., Yoshihara, S., Furushima, T., Yamada, R. & Ito, Y., 2020 5月, In: Metals. 10, 5, 674.研究成果: Article › 査読
Open Access5 被引用数 (Scopus) -
Inxga1−xse mixed crystals grown from an in flux by the traveling heater method for thz wave generation
Sato, Y., Tang, C., Watanabe, K., Ohsaki, J., Yamamoto, T., Tanabe, T. & Oyama, Y., 2020, In: Journal of Physics Communications. 4, 6, p. 1-10 10 p., 065007.研究成果: Article › 査読
Open Access1 被引用数 (Scopus) -
Material deformation behavior in t-shape hydroforming of metal microtubes
Yasui, H., Yoshihara, S., Mori, S., Tada, K. & Manabe, K. I., 2020 2月, In: Metals. 10, 2, 199.研究成果: Article › 査読
Open Access4 被引用数 (Scopus) -
Phase-matching condition for THz wave generation via difference frequency generation using InxGa1−xSe mixed crystals
Sato, Y., Nakajima, M., Tang, C., Watanabe, K., Tanabe, T. & Oyama, Y., 2020 7月 6, In: Optics Express. 28, 14, p. 20888-20897 10 p.研究成果: Article › 査読
Open Access2 被引用数 (Scopus) -
Study on highly efficient machining by small-diameter radius end mill (2nd report)-effect of pick feed on machining characteristic in the reciprocating cutting
Nakai, H., Iida, Y., Sawa, T. & Anzai, M., 2020, In: Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 86, 1, p. 99-105 7 p.研究成果: Article › 査読
Open Access -
日本ソフトウェア科学会第 36 回大会報告
Ito, K. & Noda, N., 2020, In: Computer Software. 37, 2, p. 2-13 12 p.研究成果: Article › 査読
-
2019
Automating the mold-material grinding process
Sawa, T., 2019, In: International Journal of Automation Technology. 13, 6, p. 722-727 6 p.研究成果: Article › 査読
3 被引用数 (Scopus) -
Biodegradable and hollowed micro-scaffolds for improved modular assembly-based tissue engineering: Design, 3D fabrication, and feasibility in randomly packed perfusion culture
Pang, Y., Sutoko, S., Horimoto, Y., Weng, D., Montagne, K., Komori, K., Takano, K., Shirakashi, R., Anzai, M., Niino, T. & Sakai, Y., 2019 9月 15, In: Biochemical Engineering Journal. 149, 107239.研究成果: Article › 査読
4 被引用数 (Scopus) -
Effect of Equal-Channel Angular Pressing on corrosion behavior of magnesium alloy for bioabsorbable stents
Yamada, R., Hosaka, T., Yoshihara, S. & Macdonald, B. J., 2019, In: Keikinzoku/Journal of Japan Institute of Light Metals. 69, 12, p. 579-586 8 p.研究成果: Article › 査読
Open Access -
Grain size effect on the nitrogen super-saturation process into AISI316 at 623 K
Aizawa, T., Yoshino, T., Shiratori, T. & Yoshihara, S. I., 2019, In: ISIJ International. 59, 10, p. 1886-1892 7 p.研究成果: Article › 査読
Open Access2 被引用数 (Scopus) -
Microstructure of plasma nitrided AISI420 martensitic stainless steel at 673 K
Aizawa, T., Yoshino, T., Morikawa, K. & Yoshihara, S. I., 2019 2月 1, In: Crystals. 9, 2, 60.研究成果: Article › 査読
Open Access9 被引用数 (Scopus) -
On Philosophical Concepts of Memory
Sakuragi, S., 2019, In: Sguardo. 1, 28, p. 285-299 15 p.研究成果: Article › 査読
-
Study on highly efficient machining by small-diameter radius end mill -cutting efficiency of face cutting and side cutting in high speed milling
Nakai, H., Iida, Y., Sawa, T. & Anzai, M., 2019, In: Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 85, 4, p. 365-373 9 p.研究成果: Article › 査読
Open Access1 被引用数 (Scopus) -
Using Building Floor Space for Station Area Population and Employment Estimation
Teh, B. T., Shinozaki, M., Chau, L. W. & Ho, C. S., 2019 3月, In: Urban Science. 3, 1, 12.研究成果: Article › 査読
Open Access -
ZM21 マグネシウム合金小径管の温間液圧バルジ加工における変形挙動
Yasui, H., Yoshihara, S., Yamada, R. & Ito, Y., 2019, In: Journal of the Japan Society for Technology of Plasticity. 60, 707, p. 346-351 6 p.研究成果: Article › 査読
Open Access -
2018
A DLC-punch array to fabricate the micro-textured aluminum sheet for boiling heat transfer control
Aizawa, T., Wasa, K. & Tamagaki, H., 2018 3月 25, In: Micromachines. 9, 4, 147.研究成果: Article › 査読
Open Access7 被引用数 (Scopus) -
Fabrication of micro diamond- like Carbon-Nozzles by plasma oxidation printing
Aizawa, T., Tamagaki, H. & Wasa, K., 2018 6月 1, In: Journal of Micro and Nano-Manufacturing. 6, 2, 021007.研究成果: Article › 査読
1 被引用数 (Scopus) -
Movement control based on model predictive control with disturbance suppression using kalman filter including disturbance estimation
Ohhira, T. & Shimada, A., 2018, In: IEEJ Journal of Industry Applications. 7, 5, p. 387-395 9 p.研究成果: Article › 査読
8 被引用数 (Scopus) -
2017
A study of dry drilling method on chromium molybdenum steel
Nakai, H., Sawa, T., Anzai, M., Sasaki, S. & Kudoh, K. I., 2017, In: Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 83, 7, p. 665-671 7 p.研究成果: Article › 査読
-
A study on the life-cycle costs of maintaining office building elevators
Nakamura, H. & Shinozaki, M., 2017 6月, In: AIJ Journal of Technology and Design. 23, 54, p. 691-696 6 p.研究成果: Article › 査読
-
Attitude Control of Quadrotor in Consideration of the Effects of a Pole Based on Limited Pole Placement
Sugawara, Y. & Shimada, A., 2017 1月 1, In: Electrical Engineering in Japan (English translation of Denki Gakkai Ronbunshi). 198, 1, p. 34-44 11 p.研究成果: Article › 査読
5 被引用数 (Scopus) -
Evidence-based neighborhood greening and concomitant improvement of urban heat environment in the context of a world heritage site - Malacca, Malaysia
Saito, K., Said, I. & Shinozaki, M., 2017 7月 1, In: Computers, Environment and Urban Systems. 64, p. 356-372 17 p.研究成果: Article › 査読
13 被引用数 (Scopus) -
Fine piercing of electromagnetic steel sheets by the plasma-nitrided tools
Aizawa, T., Ktasuta, E., Shiratori, T. & Dohda, K., 2017 1月 1, In: Procedia Engineering. 207, p. 1027-1032 6 p.研究成果: Article › 査読
2 被引用数 (Scopus) -
Low temperature plasma nitriding of inner surfaces in stainless steel mini-/micro-pipes and nozzles
Aizawa, T. & Wasa, K., 2017, In: Micromachines. 8, 5, 157.研究成果: Article › 査読
Open Access5 被引用数 (Scopus) -
Model Predictive Control for an Inverted-pendulum Robot with Time-varying Constraints
Ohhira, T. & Shimada, A., 2017 7月, In: IFAC-PapersOnLine. 50, 1, p. 776-781 6 p.研究成果: Article › 査読
8 被引用数 (Scopus) -
On multisummability of formal solutions with logarithm terms for some linear partial differential equations
Yamazawa, H., 2017 1月 1, In: Funkcialaj Ekvacioj. 60, 3, p. 371-406 36 p.研究成果: Article › 査読
2 被引用数 (Scopus) -
Phase transformation induced by high nitrogen content solid solution in the martensitic stainless steels
Farghali, A. & Aizawa, T., 2017, In: Materials Transactions. 58, 4, p. 697-700 4 p.研究成果: Article › 査読
Open Access15 被引用数 (Scopus) -
Study on the automation of grinding operation using bending vibration sound of grinding wheel
Sawa, T., 2017, In: Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 83, 9, p. 888-892 5 p.研究成果: Article › 査読
2 被引用数 (Scopus) -
松下幸之助のデザイン観と真野善一の苦悩
Masunari, K., 2017 3月 15, In: INDUSTRIAL ART NEWS. No.49, p. 9-16 8 p.研究成果: Article
-
2016
Holomorphic and singular solutions of q-difference-differential equations of briot-bouquet type
Yamazawa, H., 2016, In: Funkcialaj Ekvacioj. 59, 2, p. 185-197 13 p.研究成果: Article › 査読
Open Access7 被引用数 (Scopus) -
Low temperature high density plasma nitriding of stainless steel molds for stamping of oxide glasses
Aizawa, T., Fukuda, T. & Morita, H., 2016, In: Manufacturing Review. 3, 2016004.研究成果: Article › 査読
4 被引用数 (Scopus) -
Micro-grooving into thick CVD diamond films via hollow-cathode oxygen plasma etching
Yunata, E. E. & Aizawa, T., 2016 4月 1, In: Manufacturing Letters. 8, p. 16-20 5 p.研究成果: Article › 査読
9 被引用数 (Scopus) -
Novel integrative methodology for engineering large liver tissue equivalents based on three-dimensional scaffold fabrication and cellular aggregate assembly
Pang, Y., Horimoto, Y., Sutoko, S., Montagne, K., Shinohara, M., Mathiue, D., Komori, K., Anzai, M., Niino, T. & Sakai, Y., 2016 8月 30, In: Biofabrication. 8, 3, 035016.研究成果: Article › 査読
13 被引用数 (Scopus) -
Pulsewise-motion controlled stamping for microtexturing Onto Aluminum sheet
Aizawa, T. & Fukuda, T., 2016 3月 1, In: Journal of Micro and Nano-Manufacturing. 4, 1, 014502.研究成果: Article › 査読
2 被引用数 (Scopus) -
Recent advances and outlook in industrial instrumentation and mechatronics control
Shimada, A., 2016 12月 1, In: IEEJ Transactions on Electrical and Electronic Engineering. 11, p. S100-S107研究成果: Article › 査読