大学院理工学研究科

研究成果

年別の研究成果 1970 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023

• 9876 Article
• 2329 Conference contribution
• 462 Conference article
• 280 Paper
• 319 その他
  • 95 Chapter
  • 69 Review article
  • 50 Editorial
  • 27 Comment/debate
  • 19 Meeting Abstract
  • 16 Exhibition
  • 9 Patent
  • 8 Letter
  • 7 Abstract
  • 6 Foreword/postscript
  • 5 Book
  • 5 Poster
  • 2 Short survey
  • 1 Discussion paper

年別の研究成果

年別の研究成果

検索結果

• 2021

  遠隔操作ロボットの操作情報表示RTCの開発

  Tanigawa, T., Goto, Y., Kato, K., Nakamura, S., Sugaya, M. & Matsuhira, N., 2021 12月, p. 1S4-01.

  研究成果: Paper
• 2020

  Dynamic indoor space reconstruction using temporal point clouds

  Nozaki, R. & Nakagawa, M., 2020.

  研究成果: Paper › 査読

  • Navigation 100%
  • Escalators 67%
  • Blueprints 57%
  • 3D modeling 50%
  • Labeling 42%

• Dynamic indoor space reconstruction using temporal point clouds

  Nozaki, R. & Nakagawa, M., 2020 1月 1.

  研究成果: Paper › 査読

  • Navigation 100%
  • Escalators 67%
  • Blueprints 57%
  • 3D modeling 50%
  • Labeling 42%

• Filtering of bridge-slab bending effect in terrestrial laser scanning

  Nakagawa, M., Sasaki, K., Matsuda, S. & Ito, H., 2020.

  研究成果: Paper › 査読

  • Scanning 100%
  • Lasers 98%
  • 3D modeling 37%
  • Experiments 11%

• Filtering of bridge-slab bending effect in terrestrial laser scanning

  Nakagawa, M., Sasaki, K., Matsuda, S. & Ito, H., 2020 1月 1.

  研究成果: Paper › 査読

  • Scanning 100%
  • Lasers 98%
  • 3D modeling 37%
  • Experiments 11%

• Performance evaluation of single frequency RTK-GNSS positioning for structure inspection using wearable sensors

  Kurita, K., Takahashi, S. & Nakagawa, M., 2020 1月 1.

  研究成果: Paper › 査読

  • Wearable sensors 100%
  • Inspection 61%
  • Antennas 52%
  • Surveying 19%
  • Costs 18%

• Performance evaluation of single frequency RTK-GNSS positioning for structure inspection using wearable sensors

  Kurita, K., Takahashi, S. & Nakagawa, M., 2020.

  研究成果: Paper › 査読

  • Wearable sensors 100%
  • Inspection 61%
  • Antennas 52%
  • Surveying 19%
  • Costs 18%

• Processing speed improvement on SFM using panoramic images based on camera direction constraints

  Yamaguchi, Y., Sasaki, Y. & Nakagawa, M., 2020 1月 1.

  研究成果: Paper › 査読

  • Cameras 100%
  • Image acquisition 92%
  • Image matching 72%
  • Costs 53%
  • Image processing 31%

• Processing speed improvement on SFM using panoramic images based on camera direction constraints

  Yamaguchi, Y., Sasaki, Y. & Nakagawa, M., 2020.

  研究成果: Paper › 査読

  • Cameras 100%
  • Image acquisition 92%
  • Image matching 72%
  • Costs 53%
  • Image processing 31%

• Rapid and efficient extraction of inert platinum group metals from HNO3(aq) at elevated temperature

  Zheng, Z., Arai, T. & Takao, K., 2020 1月 1, p. 999-1001. 3 p.

  研究成果: Paper › 査読

  • Platinum 100%
  • Metals 54%
  • Temperature 34%
  • Negative ions 16%

• Real-time mapping of construction workers using multilayered LiDAr

  Nakagawa, M., Kaseda, M. & Taguchi, M., 2020 1月 1.

  研究成果: Paper › 査読

  • Satellites 100%
  • Drilling 55%
  • Data acquisition 55%
  • Navigation 49%

• Real-time mapping of construction workers using multilayered LiDAr

  Nakagawa, M., Kaseda, M. & Taguchi, M., 2020.

  研究成果: Paper › 査読

  • Satellites 100%
  • Drilling 55%
  • Data acquisition 55%
  • Navigation 49%

• Statistical analysis of decadal warming and cooling trends in equilibrium water temperature in Japan

  Miyamoto, H. & Kamimura, K., 2020.

  研究成果: Paper › 査読

  • water temperature 100%
  • Cooling 93%
  • cooling 92%
  • statistical analysis 92%
  • Statistical methods 89%
• 2019

  Experimental study on the reinforced concrete pile-cap with a pile, exterior column and foundation beam

  Kishida, S. & Mukai, T., 2019, p. 2229-2242. 14 p.

  研究成果: Paper › 査読

  • Piles 100%
  • Reinforced concrete 87%
  • Shear strength 25%
  • Pile foundations 16%
  • Structural members 15%

• Shear capacity evaluation of unbonded precast prestressed concrete beam-column joints caused volume loss by sheath tubes

  Tajima, Y. & Kishida, S., 2019, p. 2207-2216. 10 p.

  研究成果: Paper › 査読

  • Precast concrete 100%
  • Prestressed concrete 94%
  • Shear strength 82%
  • Seismic design 31%
• 2018

  A study of field condition feedback to a remote controlled underwater heavy machine operator

  Nozaki, Y., Yoshimi, T. & Fuchiyama, S., 2018 1月 1.

  研究成果: Paper › 査読

  • Excavators 100%
  • Feedback 49%
  • Water 10%
  • Experiments 6%

• Automatic tracking camera system for construction machines by combined image processing

  Inoue, M. & Yoshimi, T., 2018.

  研究成果: Paper › 査読

  • Image processing 100%
  • Cameras 90%
  • Object detection 52%
  • Control systems 31%
  • Template matching 30%
  3 被引用数 (Scopus)

• Crack detection from high-resolution aerial triplet images for safer collapse investigations in high mountain areas

  Nakagawa, M., Igusa, R., Usuki, N., Takigawa, M., Nishimura, N., Katsumata, Y. & Eguchi, T., 2018 1月 1, p. 1269-1276. 8 p.

  研究成果: Paper › 査読

  • Crack detection 100%
  • high mountain 87%
  • crack 61%
  • Antennas 50%
  • detection 45%

• Efficiency improvement for multi-position of receiver in 13.56 MHz wireless power transfer coupling system

  Cuong, N. T. & Akatsu, K., 2018.

  研究成果: Paper › 査読

  • Wireless power transfer 100%
  • Electric vehicles 47%
  • Transmitters 28%
  • Wireless charging 24%
  • Magnetic resonance 18%

• Study of High-speed SRM with Amorphous steel sheet for EV

  Tomioka, T., Aiso, K. & Akatsu, K., 2018 1月 1.

  研究成果: Paper › 査読

  • Steel sheet 100%
  • Electric vehicles 84%
  • Electric losses 37%
  • Traction motors 30%
  • Strength of materials 24%
  1 被引用数 (Scopus)

• Study on the automation of grinding process of mold material

  Sawa, T., 2018.

  研究成果: Paper › 査読

  • Bending Vibration 100%
  • Grinding Wheel 94%
  • Grinding wheels 74%
  • Acoustic waves 59%
  • Automation 57%

• The research on high precision machining of vertical wall

  Tamaki, K., Akamatsu, T., Anzai, M. & Sawa, T., 2018.

  研究成果: Paper › 査読

  • Machining 100%
  • Length 45%
  • Force 26%
  • Surface 12%
  • Steel 7%
• 2017

  An experimental result of influence of visual presentation method on subjective evaluation of moving boat noise

  Muto, K., Hosono, S. & Tokunaga, Y., 2017.

  研究成果: Paper › 査読

  • boats 100%
  • evaluation 47%
  • visual stimuli 32%
  • sound pressure 10%
  • monitors 10%
  2 被引用数 (Scopus)

• A study on improvement level of speech quality with covering bone conduction microphone for MRI examination

  Inagaki, M., Muto, K., Takahashi, K. & Yagi, K., 2017 1月 1.

  研究成果: Paper › 査読

  • microphones 100%
  • bones 93%
  • magnetic resonance 87%
  • coverings 82%
  • examination 80%
  1 被引用数 (Scopus)

• Basic study to reduce polishing process in mold manufacturing - Relationship between the surface pattern after machining and the polishing property -

  Sawa, T., 2017, p. 1205-1209. 5 p.

  研究成果: Paper › 査読

  • Machining 100%
  • Polishing 89%
  • Cutting Process 41%
  • Surface Roughness 25%
  • Surface 24%

• Efficiency improvement of sfm using image blocks for infrastructure inspection

  Nakagawa, M., Miwa, K., Nozue, S., Sekiguchi, Y., Hirate, K., Noda, Y. & Miyo, M., 2017.

  研究成果: Paper › 査読

  • Inspection 100%
  • Experiments 46%
  • Cameras 46%
  1 被引用数 (Scopus)

• Flaking concrete detection with hammering inspection methodology based on machine learning

  Saso, H., Katsuki, F. & Nakagawa, M., 2017.

  研究成果: Paper › 査読

  • Inspection 100%
  • Machine learning 96%
  • Concretes 89%
  • Geographic information systems 54%
  • Concrete construction 24%

• Image feature-based SLAM for flat surface modeling in indoor environment

  Kobayashi, T. & Nakagawa, M., 2017.

  研究成果: Paper › 査読

  • Cameras 100%
  • Experiments 25%

• Influence of Ca-addition amount on corrosion behavior of Ca-added Mg alloys

  Shimada, Y., Tsunakawa, M., Nakamura, K. & Ishizaki, T., 2017.

  研究成果: Paper › 査読

  • corrosion 100%
  • Corrosion 83%
  • Alloy 77%
  • Amount 47%
  • Sodium chloride 39%

• Preparation of corrosion resistant film on magnesium alloys with different aluminum contents by steam coating

  Tsunakawa, M., Shimada, Y., Nakamura, K. & Ishizaki, T., 2017.

  研究成果: Paper › 査読

  • Magnesium Alloy 100%
  • magnesium alloys 94%
  • steam 90%
  • Magnesium alloys 88%
  • corrosion 75%

• Representation of Ethnic Identity Thorough Spatial Conservation of the House and the Dwelling in Northern Thailand

  Shimizu, I., Tansukanun, P. & Sooksawasdi, S., 2017 7月 16, p. 1-24.

  研究成果: Paper › 査読

• STRAIN ANALYSES OF NONLINEAR CRACK BEHAVIOR AT ELEVATED TEMPERATURE BY FINITE ELEMENT METHOD AND MOIRE TOPOGRAPHICAL METHOD.

  Aizawa, T., Yagawa, G. & Ando, Y., 2017 1月 1.

  研究成果: Paper › 査読

  • Crack propagation 100%
  • Image processing 90%
  • Cracks 78%
  • Finite element method 71%
  • Creep 49%
• 2016

  Corrosion behavior of flame-resistant Calcium-added Magnesium alloy in NaCl aqueous solution containing various anion species

  Tsunakawa, M., Shiratori, R., Nakamura, K. & Ishizaki, T., 2016 1月 1, p. 1559-1565. 7 p.

  研究成果: Paper › 査読

  • Calcium alloys 100%
  • Negative ions 76%
  • Magnesium Alloy 67%
  • magnesium alloys 63%
  • Magnesium alloys 59%

• Development of hydrogen permselective membranes for the thermochemical water splitting IS process

  Ikeda, A., Oura, K., Nomura, M., Myagmarjav, O., Tanaka, N. & Kubo, S., 2016, p. 656-658. 3 p.

  研究成果: Paper › 査読

• Improving function detecting object for AGV

  Varagul, J. & Ito, T., 2016, p. 24-33. 10 p.

  研究成果: Paper › 査読
• 2015

  Comprehensive study on the efficient superheated steam drying kinetics of the low rank coal from Belchatow deposit in Poland

  Zakrzewski, M., Komatsu, Y., Sciazko, A., Akiyama, T., Kimijima, S., Hashimoto, A., Shikazono, N., Kaneko, S. & Szmyd, J. S., 2015.

  研究成果: Paper › 査読

  • Deposits 100%
  • Drying 97%
  • Coal 83%
  • Steam 83%
  • Lignite 35%

• GIS based for developing support application of concrete construction under the various environment

  Ishida, H., Anno, S. & Iyoda, T., 2015 1月 1.

  研究成果: Paper › 査読

  • Geographic information systems 100%
  • Concrete construction 91%
  • Civil engineering 17%
  • Economics 10%

• Secondary organic aerosol composition formed from volatile organic compounds on various environmental conditions

  Arai, M., Kagi, N., Fujii, S., Namiki, N., Sekiguchi, K., Azuma, K., Suwa, Y. & Tamura, H., 2015.

  研究成果: Paper › 査読

  • Volatile organic compounds 100%
  • Aerosols 99%
  • Ozone 69%
  • Chemical analysis 53%
  • Time and motion study 18%
• 2014

  An application of the generalized least squares method to the analysis of the heat transfer process with supplementary data

  Sciazko, A., Komatsu, Y., Kimijima, S., Kolenda, Z. S. & Szmyd, J. S., 2014.

  研究成果: Paper › 査読

  • least squares method 100%
  • methodology 68%
  • heat transfer 65%
  • Mathematical models 58%
  • Heat transfer 56%

• A study on warning activation timing of rear-end collision with driver model of neural network

  Hirose, T., Kaneko, Y., Kasuga, N. & Sawada, T., 2014 1月 1.

  研究成果: Paper › 査読

  • Alarm systems 100%
  • Chemical activation 95%
  • Neural networks 64%
  • Braking 35%
  • Deceleration 19%

• Detection and notification of dangerous obstacles and places for visually impaired persons using a smart cane

  Niitsu, Y., Taniguchi, T. & Kawashima, K., 2014 1月 1, p. 68-69. 2 p.

  研究成果: Paper › 査読

  • Stairs 100%
  • Sensors 41%
  • Experiments 28%
  13 被引用数 (Scopus)

• Effects of visual elements into the touch interaction during the drag operation

  Yang, W. S., Yusuke, S. & Ahrary, A., 2014 9月 29, p. 141-146. 6 p.

  研究成果: Paper › 査読

  • Smartphones 100%
  • Drag 96%
  • Display devices 81%

• IoT-security approach analysis for the novel nutrition-based vegetable production and distribution system

  Dennis, A. L. R., Ahrary, A., Horibe, N. & Yang, W. S., 2014 9月 29, p. 185-189. 5 p.

  研究成果: Paper › 査読

  • Vegetables 100%
  • Nutrition 98%
  • Internet of things 64%
  • Heterogeneous networks 26%
  • Big data 23%
  6 被引用数 (Scopus)

• Prediction of the meta-stability phase through analysis of driving behavior

  Ito, T. & Kaneyasu, R., 2014.

  研究成果: Paper › 査読

  • Phase stability 100%
  • traffic behavior 91%
  • traffic 68%
  • Prediction 57%
  • travel 34%

• Reducing signal transmission loss by low surface roughness

  Okubo, T. A., Sudo, T., Hosoi, T., Tsuyoshi, H. & Kuwako, F., 2014 1月 1.

  研究成果: Paper › 査読

  • Surface roughness 100%
  • Copper 98%
  • Metal foil 86%
  • Printed circuit boards 80%
  • Dielectric losses 51%
  1 被引用数 (Scopus)

• Robust watermarking method by systematic block diffusion using discrete cosine transform

  Ohzeki, K., Bannai, K., Wei, Y. Y., Hirakawa, Y. & Sato, K., 2014, p. 112-121. 10 p.

  研究成果: Paper › 査読

  • Discrete cosine transforms 100%
  • Watermarking 99%
  • Pixels 66%
  • Experiments 15%

• Signal transmission loss due to copper surface roughness in high-frequency region

  Liew, E., Malaysia, M. C. F., Malaysia, S. A., Okubo, T. A., Sudo, T., Hosoi, T., Tsuyoshi, H. & Kuwako, F., 2014 1月 1.

  研究成果: Paper › 査読

  • Surface roughness 100%
  • Copper 98%
  • Metal foil 86%
  • Printed circuit boards 80%
  • Dielectric losses 51%
  6 被引用数 (Scopus)

• The effect of a safety education web system on driving behaviour: A self-learning system using videos of driving recorders

  Michisita, T., Ishizaki, H., Yasuda, T., Tokunaga, S., Toritsuka, T., Ukena, K. & Kasuga, N., 2014 1月 1.

  研究成果: Paper › 査読

  • Learning systems 100%
  • Education 82%
  • Hazards 43%
  • Simulators 35%
  • Experiments 34%

• Using a low-cost electroencephalogram (EEG) directly as random number generator

  Petchlert, B. & Hasegawa, H., 2014 9月 29, p. 470-474. 5 p.

  研究成果: Paper › 査読

  • Binary sequences 100%
  • Electroencephalography 97%
  • Costs 38%
  • Statistical tests 29%
  • Biometrics 24%
  12 被引用数 (Scopus)

• Verification and optimization of formula SAE suspension employing inerter mechanism

  Tran, T. T., Hori, C. & Hasegawa, H., 2014.

  研究成果: Paper › 査読

  • Tires 100%
  • Cost functions 93%
  • Dynamical systems 83%
  • Stiffness 71%