A 3 T magnetic field generator using melt-processed bulk superconductors as trapped field magnets and its applications

T. Oka, K. Yokoyama, Y. Itoh, Y. Yanagi, M. Yoshikawa, H. Ikuta, U. Mizutani, H. Okada, K. Noto

研究成果: Conference article査読

15 被引用数 (Scopus)

抄録

An intense magnetic field generator yielding 3.15 T in the open space between the magnetic poles has been constructed by using a pair of melt-processed bulk superconductors as trapped field magnets. The field was measured in a 2 mm gap between the magnetic poles set face-to-face after the pulsed-field magnetization "IMRA" method. This field generator is composed of Sm-based 123 compounds, vacuum pumps, pulsed-field coils and GM refrigerators with compressors. The system can be used in various applications. We investigated, for instance, the application to a high gradient magnetic separation system. It was found that the alpha hematite fine particles mixed in the flowing water was completely removed by this technique which was operated in the field of 1.7 T in the gap of 20 mm.

本文言語English
ページ(範囲)709-712
ページ数4
ジャーナルPhysica C: Superconductivity and its applications
392-396
PART 1
DOI
出版ステータスPublished - 2003 10月
外部発表はい
イベントProceedings of the 15th International Symposium on Superconduc - Yokohama, Japan
継続期間: 2002 11月 112002 11月 13

ASJC Scopus subject areas

  • 電子材料、光学材料、および磁性材料
  • 凝縮系物理学
  • エネルギー工学および電力技術
  • 電子工学および電気工学

フィンガープリント

「A 3 T magnetic field generator using melt-processed bulk superconductors as trapped field magnets and its applications」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル