A new proposal of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD - First trial to develop individually designed cuff-units for continuous blood pressure measurement

M. Ogawa; K. Motoi; T. Yamakoshi; M. Nogawa; Y. Yamakoshi; M. Shibata; Y. Yamakoshi

doi:10.1109/IEMBS.2011.6090992

A new proposal of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD - First trial to develop individually designed cuff-units for continuous blood pressure measurement

M. Ogawa, K. Motoi, T. Yamakoshi, M. Nogawa, Y. Yamakoshi, M. Shibata, Y. Yamakoshi

研究成果: Conference contribution

抄録

The concept of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD (3D-CAD) was proposed. This concept is to make individually designed and fabricated sensor unit to attach human body. Within the proposed concept, cuff-units for continuous blood pressure measurement were individually designed using 3D-CAD and fabricated automatically. As the result, blood pressure wave forms can be obtained using the finally developed cuff units. Using rapid prototyping device, the design and fabrication process were accelerated without any artisan-like high skilled persons.

本文言語	English
ホスト出版物のタイトル	33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS 2011
ページ	3994-3997
ページ数	4
DOI	https://doi.org/10.1109/IEMBS.2011.6090992
出版ステータス	Published - 2011
外部発表	はい
イベント	33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS 2011 - Boston, MA, United States 継続期間: 2011 8月 30 → 2011 9月 3

出版物シリーズ

名前	Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS
ISSN（印刷版）	1557-170X

Conference

Conference	33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS 2011
国/地域	United States
City	Boston, MA
Period	11/8/30 → 11/9/3

ASJC Scopus subject areas

信号処理
生体医工学
コンピュータビジョンおよびパターン認識
健康情報学

文献へのアクセス

10.1109/IEMBS.2011.6090992

他のファイルとリンク

フィンガープリント

「A new proposal of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD - First trial to develop individually designed cuff-units for continuous blood pressure measurement」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル

Ogawa, M., Motoi, K., Yamakoshi, T., Nogawa, M., Yamakoshi, Y., Shibata, M., & Yamakoshi, Y. (2011). A new proposal of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD - First trial to develop individually designed cuff-units for continuous blood pressure measurement. In 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS 2011 (pp. 3994-3997). [6090992] (Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS). https://doi.org/10.1109/IEMBS.2011.6090992

A new proposal of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD - First trial to develop individually designed cuff-units for continuous blood pressure measurement. / Ogawa, M.; Motoi, K.; Yamakoshi, T. その他.
33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS 2011. 2011. p. 3994-3997 6090992 (Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS).

研究成果: Conference contribution

Ogawa, M, Motoi, K, Yamakoshi, T, Nogawa, M, Yamakoshi, Y, Shibata, M & Yamakoshi, Y 2011, A new proposal of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD - First trial to develop individually designed cuff-units for continuous blood pressure measurement. in 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS 2011., 6090992, Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS, pp. 3994-3997, 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS 2011, Boston, MA, United States, 11/8/30. https://doi.org/10.1109/IEMBS.2011.6090992

Ogawa M, Motoi K, Yamakoshi T, Nogawa M, Yamakoshi Y, Shibata M その他. A new proposal of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD - First trial to develop individually designed cuff-units for continuous blood pressure measurement. In 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS 2011. 2011. p. 3994-3997. 6090992. (Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS). doi: 10.1109/IEMBS.2011.6090992

Ogawa, M. ; Motoi, K. ; Yamakoshi, T. その他. / A new proposal of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD - First trial to develop individually designed cuff-units for continuous blood pressure measurement. 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS 2011. 2011. pp. 3994-3997 (Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS).

@inproceedings{c404f00e2f40439e9cb63f6e0e501f88,

title = "A new proposal of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD - First trial to develop individually designed cuff-units for continuous blood pressure measurement",

abstract = "The concept of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD (3D-CAD) was proposed. This concept is to make individually designed and fabricated sensor unit to attach human body. Within the proposed concept, cuff-units for continuous blood pressure measurement were individually designed using 3D-CAD and fabricated automatically. As the result, blood pressure wave forms can be obtained using the finally developed cuff units. Using rapid prototyping device, the design and fabrication process were accelerated without any artisan-like high skilled persons.",

author = "M. Ogawa and K. Motoi and T. Yamakoshi and M. Nogawa and Y. Yamakoshi and M. Shibata and Y. Yamakoshi",

year = "2011",

doi = "10.1109/IEMBS.2011.6090992",

language = "English",

isbn = "9781424441211",

series = "Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS",

pages = "3994--3997",

booktitle = "33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS 2011",

note = "33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS 2011 ; Conference date: 30-08-2011 Through 03-09-2011",

}

TY - GEN

T1 - A new proposal of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD - First trial to develop individually designed cuff-units for continuous blood pressure measurement

AU - Ogawa, M.

AU - Motoi, K.

AU - Yamakoshi, T.

AU - Nogawa, M.

AU - Yamakoshi, Y.

AU - Shibata, M.

AU - Yamakoshi, Y.

PY - 2011

Y1 - 2011

N2 - The concept of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD (3D-CAD) was proposed. This concept is to make individually designed and fabricated sensor unit to attach human body. Within the proposed concept, cuff-units for continuous blood pressure measurement were individually designed using 3D-CAD and fabricated automatically. As the result, blood pressure wave forms can be obtained using the finally developed cuff units. Using rapid prototyping device, the design and fabrication process were accelerated without any artisan-like high skilled persons.

AB - The concept of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD (3D-CAD) was proposed. This concept is to make individually designed and fabricated sensor unit to attach human body. Within the proposed concept, cuff-units for continuous blood pressure measurement were individually designed using 3D-CAD and fabricated automatically. As the result, blood pressure wave forms can be obtained using the finally developed cuff units. Using rapid prototyping device, the design and fabrication process were accelerated without any artisan-like high skilled persons.

UR - http://www.scopus.com/inward/record.url?scp=84055176217&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84055176217&partnerID=8YFLogxK

U2 - 10.1109/IEMBS.2011.6090992

DO - 10.1109/IEMBS.2011.6090992

M3 - Conference contribution

C2 - 22255215

AN - SCOPUS:84055176217

SN - 9781424441211

T3 - Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS

SP - 3994

EP - 3997

BT - 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS 2011

T2 - 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS 2011

Y2 - 30 August 2011 through 3 September 2011

ER -