Analysis of sensorless MPPT method for hybrid PV-Wind system using DFIG Wind Turbines

Danvu Nguyen, Goro Fujita

研究成果: Article査読

18 被引用数 (Scopus)


In this paper, a sensorless Maximum Power Point Tracking (MPPT) method for a hybrid Photovoltaic-Wind system, which consists of Photovoltaic (PV) system and Doubly-Fed Induction Generator (DFIG) Wind Turbine (WT), is proposed. In the hybrid system, the DC/DC converter output of the PV system is directly connected to the DC-link of DFIG's back-to-back converter. Therefore, the PV inverter and its associated circuit can be removed in this structure. Typically, the PV power is monitored by using PV current sensor and PV voltage sensor for MPPT. In this research, the powers of converters on grid side and rotor side of DFIG are used to estimate the PV power without the PV current sensor. In the other words, the available sensors of DFIG are applied to track the maximum power of the PV system without the measured value of the PV power. That can efficiently reduce the cost of system compared to two separate systems with traditional MPPT method. Simulation studies are conducted to investigate the performance of the proposed method. The sensorless MPPT hybrid system can work very well under changes of operational conditions, such as irradiation and input power. As illustrated in the simulation results, the proposed system can handle powers in various direction harmoniously. The DC-link is also maintained stable during these variations. Overall, the proposed method can be utilized to harness the maximum power of PV system without the PV power information.

ジャーナルSustainable Energy, Grids and Networks
出版ステータスPublished - 2016 3月 1

ASJC Scopus subject areas

  • 制御およびシステム工学
  • 再生可能エネルギー、持続可能性、環境
  • エネルギー工学および電力技術
  • 電子工学および電気工学


「Analysis of sensorless MPPT method for hybrid PV-Wind system using DFIG Wind Turbines」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。