Common mode radiation of a printed circuit board with embedded decoupling capacitor excited by IC's shoot-through current

Toshio Sudo; Seiju Ichijo; Takanobu Kushihira; Takuya Yamamoto; Kazuhiro Yamazaki

doi:10.1109/ESTC.2006.279980

Common mode radiation of a printed circuit board with embedded decoupling capacitor excited by IC's shoot-through current

Toshio Sudo, Seiju Ichijo, Takanobu Kushihira, Takuya Yamamoto, Kazuhiro Yamazaki

研究成果: Conference contribution

抄録

Electromagnetic radiations of power bus with embedded decoupling capacitor composed of different insulator thicknesses were investigated for two case: with on-board global capacitors and without them. In order to distinguish the common mode radiation of the power bus due to shoot-through current from normal mode radiation, two different lengths of signal traces were compared. It has been proved that radiated emission due to shoot-through current was reduced over the wide frequency range by the PCBs with thinner insulators without on-board global capacitors, and was reduced in the limited frequency range by the PCB with relatively thick insulator and on-board global capacitors.

本文言語	English
ホスト出版物のタイトル	ESTC 2006 - 1st Electronics Systemintegration Technology Conference
ページ	67-72
ページ数	6
巻	1
DOI	https://doi.org/10.1109/ESTC.2006.279980
出版ステータス	Published - 2007
イベント	ESTC 2006 - 1st Electronics Systemintegration Technology Conference - Dresden, Saxony 継続期間: 2006 9月 5 → 2006 9月 7

Other

Other	ESTC 2006 - 1st Electronics Systemintegration Technology Conference
City	Dresden, Saxony
Period	06/9/5 → 06/9/7

ASJC Scopus subject areas

電子工学および電気工学

文献へのアクセス

10.1109/ESTC.2006.279980

他のファイルとリンク

引用スタイル

Sudo, T, Ichijo, S, Kushihira, T, Yamamoto, T & Yamazaki, K 2007, Common mode radiation of a printed circuit board with embedded decoupling capacitor excited by IC's shoot-through current. in ESTC 2006 - 1st Electronics Systemintegration Technology Conference. vol. 1, 4060704, pp. 67-72, ESTC 2006 - 1st Electronics Systemintegration Technology Conference, Dresden, Saxony, 06/9/5. https://doi.org/10.1109/ESTC.2006.279980

@inproceedings{fd2d9e3a94234c4481b96e1da55017c3,

title = "Common mode radiation of a printed circuit board with embedded decoupling capacitor excited by IC's shoot-through current",

abstract = "Electromagnetic radiations of power bus with embedded decoupling capacitor composed of different insulator thicknesses were investigated for two case: with on-board global capacitors and without them. In order to distinguish the common mode radiation of the power bus due to shoot-through current from normal mode radiation, two different lengths of signal traces were compared. It has been proved that radiated emission due to shoot-through current was reduced over the wide frequency range by the PCBs with thinner insulators without on-board global capacitors, and was reduced in the limited frequency range by the PCB with relatively thick insulator and on-board global capacitors.",

author = "Toshio Sudo and Seiju Ichijo and Takanobu Kushihira and Takuya Yamamoto and Kazuhiro Yamazaki",

year = "2007",

doi = "10.1109/ESTC.2006.279980",

language = "English",

isbn = "1424405521",

volume = "1",

pages = "67--72",

booktitle = "ESTC 2006 - 1st Electronics Systemintegration Technology Conference",

note = "ESTC 2006 - 1st Electronics Systemintegration Technology Conference ; Conference date: 05-09-2006 Through 07-09-2006",

}

TY - GEN

T1 - Common mode radiation of a printed circuit board with embedded decoupling capacitor excited by IC's shoot-through current

AU - Sudo, Toshio

AU - Ichijo, Seiju

AU - Kushihira, Takanobu

AU - Yamamoto, Takuya

AU - Yamazaki, Kazuhiro

PY - 2007

Y1 - 2007

N2 - Electromagnetic radiations of power bus with embedded decoupling capacitor composed of different insulator thicknesses were investigated for two case: with on-board global capacitors and without them. In order to distinguish the common mode radiation of the power bus due to shoot-through current from normal mode radiation, two different lengths of signal traces were compared. It has been proved that radiated emission due to shoot-through current was reduced over the wide frequency range by the PCBs with thinner insulators without on-board global capacitors, and was reduced in the limited frequency range by the PCB with relatively thick insulator and on-board global capacitors.

AB - Electromagnetic radiations of power bus with embedded decoupling capacitor composed of different insulator thicknesses were investigated for two case: with on-board global capacitors and without them. In order to distinguish the common mode radiation of the power bus due to shoot-through current from normal mode radiation, two different lengths of signal traces were compared. It has been proved that radiated emission due to shoot-through current was reduced over the wide frequency range by the PCBs with thinner insulators without on-board global capacitors, and was reduced in the limited frequency range by the PCB with relatively thick insulator and on-board global capacitors.

UR - http://www.scopus.com/inward/record.url?scp=42549137349&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=42549137349&partnerID=8YFLogxK

U2 - 10.1109/ESTC.2006.279980

DO - 10.1109/ESTC.2006.279980

M3 - Conference contribution

SN - 1424405521

SN - 9781424405527

VL - 1

SP - 67

EP - 72

BT - ESTC 2006 - 1st Electronics Systemintegration Technology Conference

T2 - ESTC 2006 - 1st Electronics Systemintegration Technology Conference

Y2 - 5 September 2006 through 7 September 2006

ER -

Common mode radiation of a printed circuit board with embedded decoupling capacitor excited by IC's shoot-through current

抄録

Other

ASJC Scopus subject areas

文献へのアクセス

他のファイルとリンク

フィンガープリント

引用スタイル