Design and fabrication of finger rehabilitation device for stroke patients - A prototype development

Shahrol Mohamaddan; Annisa Jamali; Mohd Syahmi Jamaludin

Design and fabrication of finger rehabilitation device for stroke patients - A prototype development

Shahrol Mohamaddan, Annisa Jamali, Mohd Syahmi Jamaludin

研究成果: Paper › 査読

抄録

Fingers are important parts of human body. Major daily life activities are performed by using fingers. Stroke is an example of problem that can cause fingers malfunction. In order to have a chance for recovery, stroke patient need rehabilitation courses at the early stage of stroke. However, since the number of therapist is inadequate, there is a need to develop the home-based finger rehabilitation device to support the rehabilitation courses. In this project, the design and fabrication of the finger rehabilitation device is presented. The device was developed based on the wire-driven extension and flexion mechanism and controlled by a single on/off switch.

本文言語	English
出版ステータス	Published - 2014
外部発表	はい
イベント	5th Brunei International Conference on Engineering and Technology, BICET 2014 - Bandar Seri Begawan, Brunei Darussalam 継続期間: 2014 11月 1 → 2014 11月 3

Conference

Conference	5th Brunei International Conference on Engineering and Technology, BICET 2014
国/地域	Brunei Darussalam
City	Bandar Seri Begawan
Period	14/11/1 → 14/11/3

ASJC Scopus subject areas

電子工学および電気工学

他のファイルとリンク

引用スタイル

@conference{add98651a0c94711af2c453661a65da7,

title = "Design and fabrication of finger rehabilitation device for stroke patients - A prototype development",

abstract = "Fingers are important parts of human body. Major daily life activities are performed by using fingers. Stroke is an example of problem that can cause fingers malfunction. In order to have a chance for recovery, stroke patient need rehabilitation courses at the early stage of stroke. However, since the number of therapist is inadequate, there is a need to develop the home-based finger rehabilitation device to support the rehabilitation courses. In this project, the design and fabrication of the finger rehabilitation device is presented. The device was developed based on the wire-driven extension and flexion mechanism and controlled by a single on/off switch.",

keywords = "Design, Ergonomics, Fabrication, Prototype, Rehabilitation, Robotics, Stroke",

author = "Shahrol Mohamaddan and Annisa Jamali and Jamaludin, {Mohd Syahmi}",

year = "2014",

language = "English",

note = "5th Brunei International Conference on Engineering and Technology, BICET 2014 ; Conference date: 01-11-2014 Through 03-11-2014",

}

TY - CONF

T1 - Design and fabrication of finger rehabilitation device for stroke patients - A prototype development

AU - Mohamaddan, Shahrol

AU - Jamali, Annisa

AU - Jamaludin, Mohd Syahmi

PY - 2014

Y1 - 2014

N2 - Fingers are important parts of human body. Major daily life activities are performed by using fingers. Stroke is an example of problem that can cause fingers malfunction. In order to have a chance for recovery, stroke patient need rehabilitation courses at the early stage of stroke. However, since the number of therapist is inadequate, there is a need to develop the home-based finger rehabilitation device to support the rehabilitation courses. In this project, the design and fabrication of the finger rehabilitation device is presented. The device was developed based on the wire-driven extension and flexion mechanism and controlled by a single on/off switch.

AB - Fingers are important parts of human body. Major daily life activities are performed by using fingers. Stroke is an example of problem that can cause fingers malfunction. In order to have a chance for recovery, stroke patient need rehabilitation courses at the early stage of stroke. However, since the number of therapist is inadequate, there is a need to develop the home-based finger rehabilitation device to support the rehabilitation courses. In this project, the design and fabrication of the finger rehabilitation device is presented. The device was developed based on the wire-driven extension and flexion mechanism and controlled by a single on/off switch.

KW - Design

KW - Ergonomics

KW - Fabrication

KW - Prototype

KW - Rehabilitation

KW - Robotics

KW - Stroke

UR - http://www.scopus.com/inward/record.url?scp=84950000667&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84950000667&partnerID=8YFLogxK

M3 - Paper

AN - SCOPUS:84950000667

T2 - 5th Brunei International Conference on Engineering and Technology, BICET 2014

Y2 - 1 November 2014 through 3 November 2014

ER -

Design and fabrication of finger rehabilitation device for stroke patients - A prototype development

抄録

Conference

ASJC Scopus subject areas

他のファイルとリンク

フィンガープリント

引用スタイル