Evaluation of fatigue crack propagation of Sn5.0Sb/Cu joint using inelastic strain energy density

Yuta Nakajima, Keisuke Ono, Yoshiharu Kariya

研究成果: Article査読

5 被引用数 (Scopus)

抄録

In this study, evaluation of fatigue crack properties in the Sn5.0Sb/Cu joint was performed by using the inelastic strain energy density Win around the crack tip which was calculated by FEM. Win-c given by the multiplication of Win obtained from an arbitrary-sized square region surrounding the crack tip by the side length of the square region did not depend on the size of the square region and the element size. The fatigue crack propagated in the solder layer and the power law of Paris law type between its fatigue crack propagation rate and ¦Win-c held. However, the power exponent in the fatigue crack propagation law differed depending on the regions of ¦Win-c. The power exponent became about 1 in the low ¦Win-c region and very large in the high ¦Win-c region. In the low ¦Win-c region, fatigue fracture propagated along the high angle grain boundaries formed ahead of the crack by the continuous dynamic recrystallization. On the other hand, the fracture transformed to static fracture mode in the high ¦Win-c region and the cleavage fracture was observed. The large power exponent in the high ¦Win-c region was attributed to the cleavage fracture.

本文言語English
ページ(範囲)876-881
ページ数6
ジャーナルMaterials Transactions
60
6
DOI
出版ステータスPublished - 2019

ASJC Scopus subject areas

  • 材料科学(全般)
  • 凝縮系物理学
  • 材料力学
  • 機械工学

フィンガープリント

「Evaluation of fatigue crack propagation of Sn5.0Sb/Cu joint using inelastic strain energy density」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル