抄録
A new type of fatigue testing machine for micro-sized specimens for MEMS applications has been developed. This fatigue testing machine consists of a magnetostrictive actuator which is able to impart small displacements to a specimen upto 20 μm with resolution of 5 nm. The actuator is connected to a metal shaft and a diamond tip of 5 μm in radius is attached to the end of the shaft. Small displacements are applied to the specimen through the diamond tip. This makes it possible to construct a high stiffness loading fixture. The magnitude of load applied to the specimen is measured by a strain gauge type load cell with a load resolution of 10 μN. The specimen stage and load cell can be moved to adjust the loading position precisely by a stepping motor at a translation resolution of 0.1 μm. Cantilever beam type specimens with dimensions of 10 × 12 × 50 μm3 were prepared from a Ni-P amorphous thin film by focused ion beam machining. Very small cyclic load (ΔP = 0.1 - 40 mN) was able to be applied to the specimen successfully. This machine appears to be promising for evaluation of fatigue properties for micro-sized specimens for MEMS applications.
| 本文言語 | English |
|---|---|
| ページ（範囲） | 241-246 |
| ページ数 | 6 |
| ジャーナル | Materials Research Society Symposium - Proceedings |
| 巻 | 605 |
| 出版ステータス | Published - 2000 12月 1 |
| 外部発表 | はい |
| イベント | Materials Science of Microelectromechanical Systems (MEMS) Devices II - Boaton, MA, USA 継続期間: 1999 11月 29 → 1999 12月 1 |
ASJC Scopus subject areas
- 材料科学（全般）
- 凝縮系物理学
- 材料力学
- 機械工学