Influence of asymmetrical waveform on low-cycle fatigue life of micro solder joint

Yoshihiko Kanda, Yoshiharu Kariya

研究成果: Article査読

16 被引用数 (Scopus)

抄録

The effects of waveform symmetry on the low-cycle fatigue life of the Sn-3.0Ag-0.5Cu alloy have been investigated, using micro solder joint specimens with approximately the same volume of solder as is used in actual products. Focusing on crack initiation life, fatigue tests on Sn-Ag-Cu micro solder joints using asymmetrical triangular waveforms revealed no significant reduction in fatigue life. A slight reduction in fatigue life at low strain ranges caused by an increase in the fatigue ductility exponent, which is the result of a weakening microstructure due to loads applied at high temperature for long testing time, was observed. This was due to the fact that grain boundary damage, which has been reported in large-size specimens subjected to asymmetrical triangular waveforms, does not occur in Sn-Ag-Cu micro size solder joints with only a small number of crystal grain boundaries.

本文言語English
ページ(範囲)238-245
ページ数8
ジャーナルJournal of Electronic Materials
39
2
DOI
出版ステータスPublished - 2010 2月 1

ASJC Scopus subject areas

  • 電子材料、光学材料、および磁性材料
  • 凝縮系物理学
  • 電子工学および電気工学
  • 材料化学

フィンガープリント

「Influence of asymmetrical waveform on low-cycle fatigue life of micro solder joint」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル