Magnetic Separation for Recovering Ni Compounds from Plating Waste with Use of HTS Bulk Magnets

T. Oka, Y. Takayanagi, S. Machida, K. Ichiju, S. Fukui, J. Ogawa, T. Sato, M. Ooizumi, M. Tsujimura, K. Yokoyama

研究成果: Article査読

11 被引用数 (Scopus)


A characteristic magnetic separation technique has been developed to recycle the Ni resource from the waste fluid of electroless Ni-plating processes. Since the plating waste still contains high concentration of Ni ions after several cycles of plating processes, the magnetic separation experiments were conducted to collect the precipitates containing Ni compounds. After extracting the fine NiHPO3 precipitate from the waste liquid, we synthesized the NiSO4 crystals from the NiHPO3 precipitates through the reaction with the concentrated sulfuric acid. The open-gradient magnetic separation was employed to separate the NiSO4 crystals from the mixed slurry composed of the NiSO4 and the NiHPO3 due to the difference between their magnetic properties. The experiments were practically conducted with use of the Gd123-based HTS bulk magnets with very steep gradient of magnetic field of over 100 T/m, which were activated to the magnetic fields of 1.53 and 1.95 T by the pulsed field magnetization process operated at 35 K. The ratio of NiSO4 content in the collected slurry attracted to the magnetic poles reached up to 98%, which suggests that the paramagnetic NiSO4 crystals are preferentially collected by the magnetic force from the mixed slurry in the strong magnetic field generated by the HTS bulk magnet.

ジャーナルIEEE Transactions on Applied Superconductivity
出版ステータスPublished - 2016 6月

ASJC Scopus subject areas

  • 電子材料、光学材料、および磁性材料
  • 凝縮系物理学
  • 電子工学および電気工学


「Magnetic Separation for Recovering Ni Compounds from Plating Waste with Use of HTS Bulk Magnets」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。