Portable micro liquid dispenser system with pressurization and decompression switchable micro pump chip

Tadahiro Hasegawa; Fumiyuki Omatsu; Koji Ikuta

Portable micro liquid dispenser system with pressurization and decompression switchable micro pump chip

Tadahiro Hasegawa, Fumiyuki Omatsu, Koji Ikuta

研究成果: Paper › 査読

抄録

Pneumatic micro dispenser system that is able to be operated manually and easily was developed. The pressurization and decompression switchable micropump chip, the PDMS sampling chip, and the 10-directional switching valve chip as the component of this system were developed successfully. Moreover, this system assembled with these active chips can divide liquid every 0.5μL without any dead volume only by rotating the disk manually. This system can be reused only by replacing the sampling chip where the sample flows. Since these chips except the sampling chip was fabricated by our original "hybrid microstereolithography", the micro assembling and bonding are not needed.

本文言語	English
ページ	384-386
ページ数	3
出版ステータス	Published - 2008 1月 1
イベント	12th International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2008 - San Diego, CA, United States 継続期間: 2008 10月 12 → 2008 10月 16

Conference

Conference	12th International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2008
国/地域	United States
City	San Diego, CA
Period	08/10/12 → 08/10/16

ASJC Scopus subject areas

化学工学（その他）
バイオエンジニアリング

他のファイルとリンク

引用スタイル

@conference{dca263b5d3c144b8b8f291c53c27fe4b,

title = "Portable micro liquid dispenser system with pressurization and decompression switchable micro pump chip",

abstract = "Pneumatic micro dispenser system that is able to be operated manually and easily was developed. The pressurization and decompression switchable micropump chip, the PDMS sampling chip, and the 10-directional switching valve chip as the component of this system were developed successfully. Moreover, this system assembled with these active chips can divide liquid every 0.5μL without any dead volume only by rotating the disk manually. This system can be reused only by replacing the sampling chip where the sample flows. Since these chips except the sampling chip was fabricated by our original {"}hybrid microstereolithography{"}, the micro assembling and bonding are not needed.",

keywords = "10-directional switching valve chip, Hybrid microstereolithography, Micro dispenser system, Micropump chip",

author = "Tadahiro Hasegawa and Fumiyuki Omatsu and Koji Ikuta",

year = "2008",

month = jan,

day = "1",

language = "English",

pages = "384--386",

note = "12th International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2008 ; Conference date: 12-10-2008 Through 16-10-2008",

}

TY - CONF

T1 - Portable micro liquid dispenser system with pressurization and decompression switchable micro pump chip

AU - Hasegawa, Tadahiro

AU - Omatsu, Fumiyuki

AU - Ikuta, Koji

PY - 2008/1/1

Y1 - 2008/1/1

N2 - Pneumatic micro dispenser system that is able to be operated manually and easily was developed. The pressurization and decompression switchable micropump chip, the PDMS sampling chip, and the 10-directional switching valve chip as the component of this system were developed successfully. Moreover, this system assembled with these active chips can divide liquid every 0.5μL without any dead volume only by rotating the disk manually. This system can be reused only by replacing the sampling chip where the sample flows. Since these chips except the sampling chip was fabricated by our original "hybrid microstereolithography", the micro assembling and bonding are not needed.

AB - Pneumatic micro dispenser system that is able to be operated manually and easily was developed. The pressurization and decompression switchable micropump chip, the PDMS sampling chip, and the 10-directional switching valve chip as the component of this system were developed successfully. Moreover, this system assembled with these active chips can divide liquid every 0.5μL without any dead volume only by rotating the disk manually. This system can be reused only by replacing the sampling chip where the sample flows. Since these chips except the sampling chip was fabricated by our original "hybrid microstereolithography", the micro assembling and bonding are not needed.

KW - 10-directional switching valve chip

KW - Hybrid microstereolithography

KW - Micro dispenser system

KW - Micropump chip

UR - http://www.scopus.com/inward/record.url?scp=84902491484&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84902491484&partnerID=8YFLogxK

M3 - Paper

AN - SCOPUS:84902491484

SP - 384

EP - 386

T2 - 12th International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2008

Y2 - 12 October 2008 through 16 October 2008

ER -

Portable micro liquid dispenser system with pressurization and decompression switchable micro pump chip

抄録

Conference

ASJC Scopus subject areas

他のファイルとリンク

フィンガープリント

引用スタイル