Study on estimation technique of hydration on concrete in the mold by electrical resistance value

Maho Ota, Takeshi Iyoda

研究成果: Conference contribution

抄録

Strength and durability of concrete is important for using long-term structure. In order to obtain enough strength and durability, it is necessary to progress hydration on concrete during the early age. Therefore, it is important to monitor the hydration in the mold. However it is difficult to check the state of concrete in the mold. Then, we focused on the electrical resistance as a method to check hardening concrete for in the non-destructive test. It has been reported that the electric resistance of the hardening concrete has a correlation with compressive strength at remolding time and carbonation ratio. However, it is not measured in the fresh concrete. So, we measured the electrical resistance of fresh concrete in the mold. As a result, the behavior of the electric resistance is very similar to the results of heat of cement hydration measured by the conduction calorimeter. Moreover, the behavior of the electric resistance was correlated with the setting time. Thus, it can be monitored the hydration on concrete from fresh to harden in the mold by using the electrical resistance.

本文言語English
ホスト出版物のタイトルLife-Cycle of Engineering Systems: Emphasis on Sustainable Civil Infrastructure - 5th International Symposium on Life-Cycle Engineering, IALCCE 2016
出版社CRC Press/Balkema
ページ1342-1352
ページ数11
ISBN(印刷版)9781138028470
出版ステータスPublished - 2017
イベント5th International Symposium on Life-Cycle Engineering, IALCCE 2016 - Delft, Netherlands
継続期間: 2016 10月 162016 10月 20

Other

Other5th International Symposium on Life-Cycle Engineering, IALCCE 2016
国/地域Netherlands
CityDelft
Period16/10/1616/10/20

ASJC Scopus subject areas

  • 土木構造工学
  • 安全性、リスク、信頼性、品質管理

フィンガープリント

「Study on estimation technique of hydration on concrete in the mold by electrical resistance value」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル