The effect of Cr2O3/ZnO on hydrogen desorption properties of MgH2

Aep Patah, Akito Takasaki, Janusz S. Szmyd

研究成果: Conference contribution

2 被引用数 (Scopus)


Some metal oxides, in no doubt, give catalytic effects to improve the kinetics of hydrogen absorption and desorption of magnesium hydride (MgH 2) after mechanical milling (MM) process. The addition of oxides has mainly been performed by single oxide such as Nb2Os or Cr 2O3. The effect of addition of more than one oxide at the same time, however, has not been reported yet. We investigated the effects of addition of 1.0 mol% zinc oxide (ZnO) and/or 1.0 mol% Cr2O 3 on the hydrogen desorption properties of MgH2. The desorption temperature of hydride were examined by Differential Scanning Calorimeter (DSC) after MM process. The total milling time of MM, performed in an argon gas atmosphere, was 20 hours, and milling speed was 400 rpm. Addition of single oxide separately gave the hydrogen desorption temperature of MgH 2 to-362 °C and to ∼360 °C for MgH2/1.0 mol% Cr2O3 and MgH2/1.0 mol% ZnO, respectively. The hydrogen desorption temperature of MgH2 decreased to ∼347 °C after combined addition of two kinds of oxides. Most of MgH2-oxide powders showed double hydrogen desorption peaks in DSC curves. Furthermore, after a certain threshold MgH2-oxide composition, the desorption temperature of the peak doublet changed gradually to single peak due to increasing the amount of ZnO. It was also observed by X-ray diffraction measurement (XRD) that the double hydrogen peak corresponded to the presence of two polymorphic forms of magnesium hydride, β- and γ-MgH2. The γ-MgH2 phase is known as a metastable high-pressure phase, produced during MM process. XRD also showed that the presence of ZnO after MM was significantly reduced. Apparently, addition of 1.0 mol% ZnO together with 1.0 mol% Cr2O3 helps to reduce hydrogen desorption temperature of MgH2 by about 30 °C compared to that of MgH 2 without any oxide. A synergetic effect is believed to be occurred after addition of two kinds of oxides. Some mechanisms, one of which is thought could be a solid solution reaction of Zn into Mg during heating, could probably decrease the hydrogen desorption temperature of MgH2. ZnO, however, is also thought to act as a catalyst which makes their surfaces available for hydrogen chemisorbed process. The role of both the kind of oxides (Cr 2O3/ZnO) and the duality of hydride phases (β- and γ-MgH2) in hydrogen desorption process to help the improvement of absorption/desorption kinetics of MgH2 is also discussed.

ホスト出版物のタイトルSolid-State Chemistry of Inorganic Materials VII
出版ステータスPublished - 2008 12月 1
イベント2008 MRS Fall Meeting - Boston, MA, United States
継続期間: 2008 12月 12008 12月 5


名前Materials Research Society Symposium Proceedings


Conference2008 MRS Fall Meeting
国/地域United States
CityBoston, MA

ASJC Scopus subject areas

  • 材料科学(全般)
  • 凝縮系物理学
  • 材料力学
  • 機械工学


「The effect of Cr2O3/ZnO on hydrogen desorption properties of MgH2」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。