Theory and characteristics of novel variable reluctance 1X resolver

Akira Ishizaki, Kazuhiko Takasaki, Shoji Shimomura, Kouichi Masaki, Kanji Kitazawa

研究成果: Article査読

4 被引用数 (Scopus)


Although brushless resolvers have been used widely as angular position transducers, they are expensive due to their intricate construction, involving a rotary transformer to supply the exciting coils wound on the rotor poles with the current. It is shown theoretically in this paper that the resolver without rotary transformer or brushes can be realized by simple construction, which consists of the stator core with both 4-poles exciting windings and 2-poles output ones and the rotor core carrying no windings. In this resolver the rotor core has minimum gap at one side and a maximum gap at another side of the diameter. It is characterized by an outer surface form that makes the fluctuation part of gap permeance very in proportion to cos θ, where θ represents the angular position of a point in the air gap with respect to the origin on the rotor, the point of minimum air gap. The method determining the rotor form to embody the aforementioned gap permeance variation is also shown. It has been confirmed not only by simulation but also experiment that the 2-phase output voltages of a model designed based on the theory have sinusoidal waveforms with very small harmonic contents. Moreover, the rotor position detected by processing the output voltages through the conventional resolver/digital converter was within acceptable engineering accuracy.

ジャーナルElectrical Engineering in Japan (English translation of Denki Gakkai Ronbunshi)
出版ステータスPublished - 1996

ASJC Scopus subject areas

  • エネルギー工学および電力技術
  • 電子工学および電気工学


「Theory and characteristics of novel variable reluctance 1X resolver」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。