Vibration testing based on impulse response excited by laser ablation

Naoki Hosoya, Itsuro Kajiwara, Hitoshi Sorimachi

研究成果: Article査読


This paper proposes a vibration testing system based on an impulse response excited by a laser ablation. In conventional vibration testing using an impulse hammer, high frequency elements of over tens of kilohertz are barely present in the excitation force. A high-power YAG pulse laser is used in this system for producing an ideal impulse force on a structural surface. By illuminating a point on a metal with a well-focused (2 μn) YAG laser, atoms, electrons and ions etc. are emitted from the metal. As a result, an ideal impulse excitation force generated by laser ablation is applied to a point on the structure. Therefore, it is possible to measure high frequency FRFs (Frequency Response Functions) in this system. Additionally, a water droplet overlay on the metal is used to adjust the force magnitude of laser excitation. An aluminum block that has nine natural frequencies below 40 kHz is employed as a test piece. The system is validated by comparing the FRFs of the block obtained using laser excitation, an impulse hammer, and FEM. In addition, the relationship between accuracy of FRF measurements and sensitivity of sensors is investigated.

ジャーナルNihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C
出版ステータスPublished - 2009 12月

ASJC Scopus subject areas

  • 材料力学
  • 機械工学
  • 産業および生産工学


「Vibration testing based on impulse response excited by laser ablation」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。